journal article·2024-08

Scalable carbon fiber composite yarns and tubular fabrics for high-efficiency water evaporation desalination

Jiahao He, Jiugang Li, Mengzhe Bao, Pengfei Xiang, Longze Chen, Chao Song, Chong He, Wenbin Li, Jing Guo

Publisher page

Abstract

Solar-driven interfacial evaporation is a sustainable and environmentally friendly method of producing freshwater with a wide range of potential commercial uses. However, the formidable challenges of solar-driven interfacial evaporation apparatus lie in energy-conversion efficiencies and resistance to salt. Herein, a novel wrapped composite yarn was pioneered with light-absorbing carbon fibers as the primary material while Tencel was wrapped in carbon fiber bundles. Then, a three-dimensional integrated weaving method was harnessed to construct a tubular fabric evaporation fabric device. Within this fabric, polyethylene foam is introduced to ensure the stable floating of the entire evaporation device and low thermal conductivity for effective thermal management. The unique structure of the evaporation device enables it an evaporation rate of 2.122 kg m −2 h −1 under 1 kW m −2 solar insolation. This work provides a reference for the design of simple and efficient solar water evaporation devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Membrane Separation Technologies · Water Quality Monitoring Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 1T/2H MoS2 nanoflowers embedded in porous PDMS sponge with high salt-resistance for efficient and durable solar desalination10.1016/j.desal.2022.115943 ↗
2. Vertically symmetrical evaporator based on photothermal fabrics for efficient continuous desalination through inversion strategy10.1016/j.desal.2021.115072 ↗
3. Anisotropically conductive phase change composites enabled by aligned continuous carbon fibers for full-spectrum solar thermal energy harvesting10.1016/j.cej.2023.141940 ↗
4. Breath-figure self-assembled low-cost Janus fabrics for highly efficient and stable solar desalination10.1002/adfm.202113258 ↗
5. Superscalar phase boundaries derived multiple active sites in SnO2/Cu6Sn5/CuO for tandem electroreduction of CO2 to formic acid
6. An easy-to-fabricate 2.5D evaporator for efficient solar desalination
7. 3D printing a biomimetic bridge-arch solar evaporator for eliminating salt accumulation with desalination and agricultural applications10.1002/adma.202102443 ↗
8. A flexible photothermal cotton-CuS nanocage-agarose aerogel towards portable solar steam generation10.1016/j.nanoen.2018.12.008 ↗
9. Development of evaporation technique for concentrating lead acid wastewater from the battery recycling plant, by nanocomposite ceramic substrates and solar/wind energy10.1016/j.jenvman.2022.116980 ↗
10. Magnetic-controllable Janus fibrous membranes with wind-resistant floatability for airflow-enhanced solar evaporation10.1002/pol.20210942 ↗
11. Growth of phosphomolybdate-carbon hybrid nanorod array on carbon-fiber cloth with enhanced light-trapping and decreased water-evaporation enthalpy for constructing efficient salt-free hanging evaporator10.1016/j.cej.2023.146756 ↗
12. Silk-based systems for highly efficient photothermal conversion under one sun: portability, flexibility, and durability10.1039/C8TA05193C ↗
13. Hybrid nanofibrous aerogels for all-in-one solar-driven interfacial evaporation10.1016/j.jcis.2022.05.144 ↗
14. Effect of folding on 3D photothermal cones with efficient solar-driven water evaporation10.1016/j.applthermaleng.2020.115636 ↗
15. Recent advances in fibrous materials for interfacial solar steam generation10.1007/s42765-022-00228-6 ↗
16. Banyan-inspired hierarchical evaporators for efficient solar photothermal conversion10.1016/j.apenergy.2020.115545 ↗
17. An all-in-one and scalable carbon fibre-based evaporator by using the weaving craft for high-efficiency and stable solar desalination10.1039/D1TA01295A ↗
18. All-in-one polymer sponge composite 3D evaporators for simultaneous high-flux solar-thermal desalination and electricity generation10.1016/j.nanoen.2021.106882 ↗
19. Water activation in Solar-powered vapor generation10.1002/adma.202212100 ↗
20. CNT-based gel-coated cotton fabrics for constructing symmetrical evaporator with up/down inversion property for efficient continuous solar desalination10.1016/j.desal.2023.116494 ↗
21. Stretchable and superhydrophilic polyaniline/halloysite decorated nanofiber composite evaporator for high efficiency seawater desalination10.1007/s42765-022-00172-5 ↗
22. Superhydrophilic Polydopamine-Modified Carbon-Fiber membrane with rapid seawater-transferring ability for constructing efficient hanging-model evaporator10.1007/s42765-023-00276-6 ↗
23. Wearable thermoelectric 3D spacer fabric containing a photothermal ZrC layer with improved power generation efficiency10.1016/j.enconman.2021.114432 ↗
24. Micro-macro-capillaries fabric-based evaporator for eliminating salt accumulation and highly efficient solar steam generation10.1016/j.seppur.2022.122852 ↗
25. High-efficiency solar evaporator prepared by one-step carbon nanotubes loading on cotton fabric toward water purification10.1016/j.scitotenv.2019.134136 ↗
26. FDM 3D-printed volcanic-shaped structure for ultrafast solar-driven interfacial evaporation and efficient energy utilization10.1016/j.desal.2022.116275 ↗
27. Easily scaled-up and portable 3D polysulfone hollow fiber membrane tree for high-efficient solar-driven clean water production10.1016/j.solmat.2023.112340 ↗
28. Solar-powered high-performance lignin-wood evaporator for solar steam generation10.1002/adfm.202306947 ↗
29. Architecting design of interface heating fabric evaporator and its application in clean water production10.1016/j.seppur.2021.119463 ↗
30. A high-efficiency geopolymer-based 3D photoevaporation membrane enhances evaporation by using low temperature waste heat
31. Tree-inspired braiding fibrous frameworks enabling high-efficiency and salt-rejecting solar evaporation10.1039/D3TA02029K ↗
32. A 3D corncob-based interfacial solar evaporator enhanced by environment energy with salt-rejecting and anti-corrosion for seawater distillation10.1016/j.solener.2023.01.046 ↗
33. 3D printing double-layer hydrogel evaporator with surface structures for efficient solar steam generation10.1016/j.seppur.2022.122741 ↗
34. Magnetically driven tunable 3D structured Fe3O4 vertical array for high-performance solar steam generation
35. A high-efficient and ultra-strong interfacial solar evaporator based on carbon-fiber fabric for seawater and wastewater purification10.1016/j.desal.2022.115586 ↗
36. Sandwich-structured evaporator with multilayer confined heating interface for boosting solar vapor generation
37. Natural multiscale channeled salt resistant solar evaporator for efficient and long-term water desalination10.1016/j.indcrop.2023.117649 ↗
38. Enabling self-adaptive water-energy-balance of photothermal water diode evaporator: dynamically maximizing energy utilization under the ever-changing sunlight
39. Salt mitigation strategies of solar‐driven interfacial desalination