Corrosion-resistant thermal spray coatings for low-alloy steel in contact with molten nitrate salts in solar power plants
Source abstract
Abstract
The longevity and the cost of thermal energy storage (TES) components in solar power plants is a matter of great concern. To address this issue, three kinds of thermal spray coatings (Ni-5Al, NiCoCrAlY, and CoNiCrAlY) were successfully deposited on the low-alloy steel (P91) substrate by high velocity oxygen fuel (HVOF) spraying process. The corrosion performance of the prepared coatings in Solar Salt (at 565 °C for 15 days) was evaluated in detail by gravimetric analysis, field emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). Results revealed that all three coatings were quite dense and the substrates were generally well protected by the coatings. Compared with Ni-5Al and NiCoCrAlY coatings, the CoNiCrAlY coating exhibited the best corrosion performance owing to the formation of a dense oxide layer on the surface. Further, it was revealed that despite containing corrosion-resistant composition in NiCoCrAlY coating, the presence of a large number of phase interfaces could be the vulnerable regions that may result in local corrosion failure. Moreover, increasing the content of aluminum and using pre-alloyed powder may be an excellent solution to improve the performance of Ni-5Al coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · High-Temperature Coating Behaviors · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: current status and research trends10.1016/j.rser.2018.04.097 ↗
2. Thermal energy storage technologies for concentrated solar power–A review from a materials perspective10.1016/j.renene.2019.10.127 ↗
3. Heat transfer fluids for concentrating solar power systems–a review10.1016/j.apenergy.2015.01.125 ↗
4. Mehos · 2017
5. Bradshaw · 2002
6. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
7. Evolution of corrosion products on ASTM A36 and AISI 304L steels formed in exposure to molten NaNO3-KNO3 eutectic salt: electrochemical study10.1016/j.corsci.2021.110047 ↗
8. High-temperature corrosion behaviour of metal alloys in commercial molten salts10.1016/j.solener.2020.03.010 ↗
9. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °C10.1016/j.solmat.2015.08.011 ↗
10. The characterization of corrosion layers of GH3535 and Inconel 625 alloys in molten KNO3-NaNO3 salts at 500 °C
11. Mainstreaming commercial CSP systems: a technology review10.1016/j.renene.2019.03.049 ↗
12. Nanoparticle-based anticorrosion coatings for molten salts applications
13. Slurry aluminizing: a solution for molten nitrate salt corrosion in concentrated solar power plants10.1016/j.solmat.2015.11.024 ↗
14. Corrosion testing of diffusion-coated steel in molten salt for concentrated solar power tower systems10.1016/j.surfcoat.2018.08.097 ↗
15. Improving the corrosion resistance of ferritic-martensitic steels at 600 °C in molten solar salt via diffusion coatings10.1016/j.solmat.2021.111105 ↗
16. Investigation of the corrosion behavior of NiVAl multilayer coatings in hot salt melts10.1016/j.surfcoat.2015.07.045 ↗
17. Aluminide slurry coatings for protection of ferritic steel in molten nitrate corrosion for concentrated solar power technology
18. Electroless Ni–P coatings on low-Cr steels: a cost-efficient solution for solar thermal applications10.1016/j.solmat.2021.111312 ↗
19. Dynamic corrosion testing of metals in solar salt for concentrated solar power10.1016/j.solmat.2021.111331 ↗
20. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications10.1038/s41529-018-0055-0 ↗
21. Graphitization as efficient inhibitor of the carbon steel corrosion by molten binary nitrate salt for thermal energy storage at concentrated solar power10.1016/j.solmat.2019.110172 ↗
22. Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications10.1016/j.solmat.2019.110024 ↗
23. Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power10.1016/j.solmat.2020.110650 ↗
24. Effect of microstructure of a NiCoCrAlY coating fabricated by high-velocity air fuel on the isothermal oxidation10.1016/j.corsci.2019.108126 ↗
25. Comparison of microstructural evolution and oxidation behaviour of NiCoCrAlY and CoNiCrAlY as bond coats used for thermal barrier coatings10.1016/j.surfcoat.2018.08.024 ↗
26. Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation10.1016/j.surfcoat.2014.11.053 ↗
27. High-temperature corrosion performance of HVAF-sprayed NiCr, NiAl, and NiCrAlY coatings with alkali sulfate/chloride exposed to ambient air10.1016/j.corsci.2019.06.021 ↗
28. Evaluation of microstructural features of HVOF sprayed Ni-20Al coatings10.1007/s12666-018-1369-x ↗
29. Cyclic oxidation characteristics of HVOF thermal-sprayed NiCoCrAlY and CoNiCrAlY coatings at 1000 °C10.1016/j.jallcom.2018.02.282 ↗
30. Suppression of molten salt corrosion by plasma sprayed Ni3Al coatings
31. Corrosion evaluation of alloys and MCrAlX coatings in molten carbonates for thermal solar applications10.1016/j.solmat.2016.07.029 ↗
32. Corrosion resistance of MCrAlX coatings in a molten chloride for thermal storage in concentrating solar power applications10.1038/s41529-017-0012-3 ↗
33. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
34. Corrosion performance of bi-layer Ni/Cr2C3-NiCr HVAF thermal spray coating10.1016/j.apsusc.2016.02.002 ↗
35. ASTM · 2010
36. Experimental and modelling study on the β-phase depletion behaviour under the growth of spinel oxides and alumina in a CoNiCrAlY coating10.1016/j.surfcoat.2021.127859 ↗
37. Effect of pre-oxidation on high-temperature chlorine-induced corrosion properties of air plasma-sprayed Ni-5% Al coatings10.1007/s11666-021-01248-1 ↗
38. Effects of internal oxide contents on the oxidation and β-phase depletion behaviour in HOVF CoNiCrAlY coatings10.1016/j.surfcoat.2021.127666 ↗
39. Effects of surface finish on the initial oxidation of HVAF-sprayed NiCoCrAlY coatings10.1016/j.surfcoat.2019.02.068 ↗
40. Oxidation behavior of NiCoCrAlY coatings deposited by double-Glow plasma alloying10.1016/j.apsusc.2017.09.215 ↗
41. High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants10.1016/j.surfcoat.2018.05.081 ↗
42. Microkinetics of the reaction NO3- ⇌ NO2- + 0.5 O2 in molten sodium nitrate and potassium nitrate salt10.1016/j.tca.2019.178301 ↗
43. Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power10.1016/j.rser.2019.109328 ↗
44. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
45. University of Cambridge Website. The Interactive Ellingham Diagram (doitpoms.ac.uk).
46. The acidic and basic properties of oxides10.3891/acta.chem.scand.01-0592 ↗
47. Birks · 2006 · 75
48. The thermal stability of molten nitrite/nitrates salt for solar thermal energy storage in different atmospheres10.1016/j.solener.2012.05.025 ↗
49. Alloying effects in high temperature molten salt corrosion10.1016/j.corsci.2021.110003 ↗