journal article·2023-08

Development and degradation analysis of novel three-layered sustainable composite coating for daytime radiative cooling

Jay Prakash Bijarniya, Jahar Sarkar, Shivam Tiwari, Pralay Maiti

Publisher page

Abstract

Structural stability, surface cleaning and wind speed effect, along with degradation behavior against sun exposure, dust deposition and water (rain) are important technical issues of daytime radiative cool coating for real-world application. Hence, we develop a three-layered coating consisting of an adhesive bottom layer (better stability), a middle layer of novel barium fluoride particle-based composite in PMMA polymer and a top protective cleanable PMMA layer for efficient daytime radiative cooling. Cooling performance is evaluated in terms of cooling flux and sub-ambient temperature drop. Performance degradation behavior of developed coating against sun exposure, water immersion and dust immersion is investigated. The effect of wind velocity on the radiative cooler performance is also evaluated experimentally. A temperature drop of nearly 3–5 °C is observed at the peak solar irradiance and a maximum temperature drop of approximately 7.2 °C is observed during afternoon hours. A maximum cooling power of 65 W/m 2 is recorded experimentally in the afternoon. The negligible cooling performance degradation has been observed against sun, dust and water exposures, which confirms long-term sustainability. However, the significant effect of wind speed on cooling performance is observed for developed radiative coating (sub-ambient temperature drop is found to be inversely proportional to wind speed).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Psychological and Temporal Perspectives Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. The radiative cooling of selective surfaces10.1016/0038-092X(75)90062-6 ↗
2. Review on passive daytime radiative cooling : fundamentals, recent researches, challenges and opportunities10.1016/j.rser.2020.110263 ↗
3. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
4. An ultrathin transparent radiative cooling photonic structure with a high NIR reflection
5. A metamaterial emitter for highly efficient radiative cooling10.1002/adom.201500119 ↗
6. Effective radiative cooling by paint-format microsphere-based photonic random media10.1021/acsphotonics.7b01492 ↗
7. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling10.1126/science.aat9513 ↗
8. Ultrawhite BaSO4 paints and films for remarkable daytime subambient radiative cooling10.1021/acsami.1c02368 ↗
9. Experimentally optimized particle–polymer matrix structure for efficient daytime radiative cooling10.1063/5.0098335 ↗
10. Experimental development and testing of low-cost scalable radiative cooling materials for building applications10.1016/j.solmat.2021.111209 ↗
11. Preliminary experimental study of a specular and a di ff use surface for daytime radiative cooling10.1016/j.solmat.2018.11.032 ↗
12. Photonic design for color compatible radiative cooling accelerated by materials informatics10.1016/j.ijheatmasstransfer.2022.123193 ↗
13. Effect of aging, thickness and color on both the radiative properties of polyethylene films and performance of the nocturnal cooling unit10.1016/S0196-8904(96)00174-4 ↗
14. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
15. A radiative cooling structural material10.1126/science.aau9101 ↗
16. Biologically inspired flexible photonic films for efficient passive radiative cooling10.1073/pnas.2001802117 ↗
17. Self-cleaning and spectrally selective coating on cotton fabric for passive daytime radiative cooling10.1016/j.cej.2020.127104 ↗
18. Superhydrophobic porous film for daytime radiative cooling
19. Large-scale industry-compatible sub-ambient radiative cooling pulp10.1016/j.xcrp.2022.101125 ↗
20. A dual-layer polymer-based fi lm for all-day sub-ambient radiative sky cooling10.1016/j.energy.2022.124350 ↗
21. Durable radiative cooling against environmental aging10.1038/s41467-022-32409-7 ↗
22. Environmental effect on the performance of passive daytime photonic radiative cooling and building energy-saving potential10.1016/j.jclepro.2020.123119 ↗
23. A set of equations for full spectrum and 8- to 14-μm and 10.5- to 12.5-μm thermal radiation from cloudless skies10.1029/WR017i002p00295 ↗
24. UV-induced degradation study of multicrystiline silicon solar cells made from different silicon materials10.1016/j.egypro.2013.07.326 ↗