journal article·2022-05

High efficiency TOPCon solar cells with micron/nano-structured emitter for a balance of light-trapping and surface passivation

Jiahui Xu, Cheng Chen, Cui Liu, Jia Chen, Zhifeng Liu, Xiao Yuan, Hongbo Li

Publisher page

Abstract

At present, conventional micron-pyramid texture is imperfect for further reducing optical reflection loss and improving photoelectric conversion efficiency (PCE) of tunnel oxide passivating contact (TOPCon) solar cells. Herein, reactive ion etching technique is used to fabricate nanopores on top of pre-formed micron-pyramid silicon surface, called NPP structure. The equivalent medium layer with graded refractive index appeared on NPP textures makes the absorption of almost all incident light independent of the wavelength and angle. However, serious Auger recombination and surface recombination associated with NPP structure is detrimental to emitter passivation, usually counteracting the photocurrent gain. To identify an appropriate balance of light-trapping and surface passivation, we investigate the impact of different radio-frequency power ( P RF) on the optical and electrical properties of TOPCon solar cells and discusses the underlying structural causes behind these observed improvements. Finally, we demonstrate NPP TOPCon solar cells with an average short-circuit current density of 41.44 mA/cm 2 and an average PCE of 23.55% at the P RF of 600 W. Besides, the external quantum efficiency results under various incident angles from 0° to 70° exhibited excellent wide-angle spectral absorption capability, which is significant for solar cells working in an outdoor environment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Nanostructures and Photoluminescence · Nanowire Synthesis and Applications · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
2. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
3. Improved emitter performance of RIE black silicon through the application of in-situ oxidation during POCl3 diffusion10.1016/j.solmat.2020.110480 ↗
4. High symmetry nano-photonic quasi-crystals providing novel light management in silicon solar cells10.1016/j.nanoen.2021.105874 ↗
5. Light management for photovoltaics using high-index nanostructures10.1038/nmat3921 ↗
6. Black silicon: fabrication methods, properties and solar energy applications10.1039/C4EE01152J ↗
7. Near-unity quantum efficiency of broadband black silicon photodiodes with an induced junction10.1038/nphoton.2016.226 ↗
8. Enhanced telecom wavelength single-photon detection with NbTiN superconducting nanowires on oxidized silicon10.1063/1.3428960 ↗
9. Toward intraoperative detection of disseminated tumor cells in lymph nodes with silicon nanowire field effect transistors10.1021/acsnano.5b07136 ↗
10. Wide-angle Antireflection effect of subwavelength structures for solar cells10.1143/JJAP.46.3333 ↗
11. Passivation of all-angle black surfaces for silicon solar cells10.1016/j.solmat.2016.10.044 ↗
12. Angle resolved characterization of nanostructured and conventionally textured silicon solar cells10.1016/j.solmat.2015.04.001 ↗
13. Large-area MACE Si nano-inverted-pyramids for PERC solar cell application10.1016/j.solener.2019.06.015 ↗
14. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
15. High-efficiency n-type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
16. Direct fabrication of cone array microstructure on monocrystalline silicon surface by femtosecond laser texturing10.1016/j.optmat.2017.06.046 ↗
17. Efficient light trapping in silicon solar cells by ultrafast-laser-induced self-assembled micro/nano structures10.1002/pip.1067 ↗
18. Black silicon significantly enhances phosphorus diffusion gettering10.1038/s41598-018-20494-y ↗
19. Black silicon solar cells with interdigitated back-contacts achieve 22.1% efficiency10.1038/nnano.2015.89 ↗
20. Optimization of the surface structure on black silicon for surface passivation10.1186/s11671-017-1910-6 ↗
21. Suppression of surface and Auger recombination by formation and control of radial junction in silicon microwire solar cells10.1016/j.nanoen.2019.02.021 ↗
22. Economic advantages of dry-etched black silicon in passivated emitter rear cell (PERC) photovoltaic manufacturing10.3390/en11092337 ↗
23. Plasma etched c-Si wafer with proper pyramid-like nanostructures for photovoltaic applications10.1016/j.apsusc.2018.10.078 ↗
24. Reactive ion etching (RIE) technique for application in crystalline silicon solar cells10.1016/j.solener.2010.01.031 ↗
25. 17.6%-Efficient radial junction solar cells using silicon nano/micro hybrid structures10.1039/C6NR04611H ↗
26. Recombination processes in passivated boron-implanted black silicon emitters10.1063/1.4983297 ↗
27. Guidelines for etching silicon MEMS structures using fluorine high-density plasmas at cryogenic temperatures10.1109/JMEMS.2002.800928 ↗
28. Black silicon method: X. A review on high speed and selective plasma etching of silicon with profile control: an in-depth comparison between Bosch and cryostat DRIE processes as a roadmap to next generation equipment10.1088/0960-1317/19/3/033001 ↗
29. Black silicon with high density and high aspect ratio nanowhiskers10.1088/0957-4484/22/23/235307 ↗
30. Surface texturing for silicon solar cells using reactive ion etching technique
31. Plasma cryogenic etching of silicon: from the early days to today's advanced technologies10.1088/0022-3727/47/12/123001 ↗
32. Nanostructured black silicon and the optical reflectance of graded-density surfaces10.1063/1.3152244 ↗
33. High-efficiency nanostructured silicon solar cells on a large scale realized through the suppression of recombination channels10.1002/adma.201401553 ↗
34. Porous silicon optical devices for sensing applications10.1016/j.optmat.2004.08.068 ↗
35. Multiparametric sensor based on DBR porous silicon for detection of ethanol gas10.1016/j.cap.2009.04.020 ↗
36. Antireflection effects at nanostructured material interfaces and the suppression of thin-film interference10.1088/0957-4484/24/23/235202 ↗
37. Optoelectronic properties of Black-Silicon generated through inductively coupled plasma (ICP) processing for crystalline silicon solar cells10.1016/j.apsusc.2015.11.241 ↗
38. Surface passivation of boron diffused junctions by borosilicate glass and in situ grown silicon dioxide interface layer
39. Analyzing emitter dopant inhomogeneities at textured Si surfaces by using 3D process and device simulations in combination with SEM imaging
40. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
41. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
42. An examination of three common assumptions used to simulate recombination in heavily doped silicon
43. Back-Contacted silicon heterojunction solar cells: optical-loss analysis and mitigation10.1109/JPHOTOV.2015.2438641 ↗
44. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗