journal article·2013-01

Limit of Voc in polymeric bulk heterojunction solar cells predicted by a double-junction model

Mingdong Wang, Shizhao Zheng, Xi Wan, Yaorong Su, Ning Ke, Ni Zhao, King Young Wong, Jianbin Xu

Publisher page

Abstract

Abstract In this paper, we will describe the limit of the open-circuit voltage ( V oc ) in polymer bulk heterojunction (BHJ) solar cells using a double-junction model. In addition to the often-discussed donor/acceptor junction, we also consider the role of a Schottky junction formed between the cathode and the donor material. Such Schottky junction exists in many BHJ solar cells as a consequence of the undesirable vertical phase separation. The double-junction model was investigated using the impedance spectroscopy and transient photovoltage measurements. By studying different BHJ systems and comparing the characteristics of devices with and without an interlayer between the cathode and the BHJ layer, we found that the V oc is determined by the junction with the smaller negative capacitance onset and that the cathode modification can tune the V oc maximum from the Schottky junction limited regime to the donor/acceptor junction limited regime.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
2. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
3. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
4. Limits of open circuit voltage in organic photovoltaic devices10.1063/1.3360336 ↗
5. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
6. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
7. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
8. Open-circuit voltage limit caused by recombination through tail states in bulk heterojunction polymer-fullerene solar cells10.1063/1.3358121 ↗
9. Role of the charge transfer state in organic donor–acceptor solar cells10.1002/adma.201000376 ↗
10. Modeling of bulk and bilayer organic heterojunction solar cells10.1063/1.3383232 ↗
11. Bimolecular recombination losses in polythiophene: Fullerene solar cells10.1103/PhysRevB.78.113201 ↗
12. Electroluminescence from charge transfer states in polymer solar cells10.1021/ja903100p ↗
13. Performance and stability improvement of P3HT:PCBM-based solar cells by thermally evaporated chromium oxide (CrOx) interfacial layer10.1021/am100541d ↗
14. Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode10.1063/1.3580629 ↗
15. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
16. Efficient polymer-based interpenetrated network photovoltaic cells10.1063/1.1669065 ↗
17. Low-temperature control of nanoscale morphology for high performance polymer photovoltaics10.1021/nl802425r ↗
18. The effect of Al2O3 barrier layers in TiO2/Dye/CuSCN photovoltaic cells explored by recombination and DOS characterization using transient photovoltage measurements10.1021/jp0468049 ↗
19. Surface-directed spinodal decomposition in Poly[3-hexylthiophene] and C(61)-Butyric acid methyl ester blends10.1021/nn102899g ↗
20. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
21. Interaction of oxygen with conjugated polymers: charge transfer complex formation with Poly(3-alkylthiophenes)10.1021/ja964229j ↗
22. Influence of moisture on device characteristics of polythiophene-based field-effect transistors10.1063/1.1691190 ↗
23. Substrate-dependent interface composition and charge transport in films for organic photovoltaics10.1063/1.3149706 ↗
24. Interface investigation and engineering - achieving high performance polymer photovoltaic devices (vol 20, pg 2575, 2010)10.1039/b925382c ↗
25. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
26. Photocurrent generation in plain [6,6]-phenyl C61 butyric acid methyl ester10.1016/j.solmat.2010.09.001 ↗
27. Recombination in annealed and nonannealed polythiophene/fullerene solar cells: transient photovoltage studies versus numerical modeling10.1021/jz1001506 ↗
28. Non-geminate recombination as the primary determinant of open-circuit voltage in polythiophene:fullerene blend solar cells: an analysis of the influence of device processing conditions10.1002/adfm.201100225 ↗