journal article·2024-07

A novel lauric acid in silicone oil phase change emulsion with enhanced thermal properties and stability prepared by emulsion inversion point method

Yufen Chen, Songping Mo, Junhao Chen, Yuxin Yu, Lisi Jia, Ying Chen

Publisher page

Abstract

The temperature range within which phase change materials (PCM) in water emulsions can effectively function is limited to 0–100 °C. In contrast, non-aqueous emulsions offer a broader temperature range for heat storage and transfers, along with greater chemical stability. This research involved the preparation of a PCM in silicone oil phase change emulsion using the emulsion inversion point (EIP) method as an alternative to high-energy methods which known for their high energy consumption and low efficiency. The emulsion was produced by gradually adding silicone oil to a mixture of lauric acid and surfactant under low-speed stirring. The study focused on assessing dispersion stability and thermal properties of emulsions with varying PCM concentrations. Results showed that similar droplet sizes can be achieved compared to high-energy methods, with average droplet sizes ranging from 5.21 to 6.89 μm for emulsions containing 5%–20% lauric acid. The phase change enthalpy of the emulsions aligned with theoretical values, showing a supercooling below 3.0 °C when PCM concentration was between 10 and 20%. Additionally, the viscosity of the emulsions decreased as the PCM concentration increased. Moreover, the addition of nanoparticles increased thermal conductivity by 19.8%, with energy storage efficiency remaining at 97.3% after thermal cycling. The emulsions also demonstrated reduced pumping power requirements by 87.3% and 99.4% at 25 °C and 50 °C, respectively, compared to the base fluid, making them promising candidates for enhancing the utilization of renewable energy sources including solar energy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
2. Fabrication of a novel nano phase change material emulsion with low supercooling and enhanced thermal conductivity10.1016/j.renene.2019.11.044 ↗
3. A comprehensive review on phase change material emulsions: fabrication, characteristics, and heat transfer performance10.1016/j.solmat.2018.11.016 ↗
4. Experimental study on heat capacity of paraffin/water phase change emulsion10.1016/j.enconman.2009.12.038 ↗
5. State of the art on phase change material slurries10.1016/j.enconman.2012.07.004 ↗
6. Improving energy efficiency of photovoltaic/thermal systems by cooling with PCM nano-emulsions: an indoor experimental study10.1016/j.renene.2022.12.090 ↗
7. Formulation of highly stable PCM nano-emulsions with reduced supercooling for thermal energy storage using surfactant mixtures10.1016/j.solmat.2021.110983 ↗
8. Thermophysical properties of phase change emulsions prepared by D-phase emulsification10.1016/j.enconman.2016.05.065 ↗
9. Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications10.1016/j.energy.2009.03.016 ↗
10. Low temperature paraffin phase change emulsions10.1016/j.ijrefrig.2010.05.016 ↗
11. Making dry fertile: a practical tour of non-aqueous emulsions and miniemulsions, their preparation and some applications10.1039/c1sm06156a ↗
12. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
13. Formulation of oil in oil emulsions: potential drug reservoirs for slow release10.1016/S1773-2247(04)50022-9 ↗
14. Non-aqueous olive oil-in-glycerin (o/o) Pickering emulsions: preparation, characterization and in vitro aspirin release10.1080/01932691.2017.1406368 ↗
15. Oil-in-Oil Pickering emulsions stabilized with kaolinite10.1016/j.molliq.2023.122343 ↗
16. Influence of freezing rate variation on the microstructure and physicochemical properties of food emulsions10.1016/j.jfoodeng.2013.05.034 ↗
17. A rheological analysis of structured water-in-olive oil emulsions10.1016/j.jfoodeng.2011.07.013 ↗
18. Formulation and processing of novel non-aqueous polyethylene glycol-in-silicone oil (o/o) phase change emulsions10.1016/j.solmat.2020.110898 ↗
19. Oil-in-Oil emulsions of stearic acid dispersed in silicone oil with enhanced energy storage capability for heat transfer fluids10.1016/j.solmat.2022.111893 ↗
20. Oil-in-Oil emulsions stabilized by asymmetric polymersomes formed by AC + BC block polymer Co-assembly10.1021/jacs.6b01697 ↗
21. Stabilization of non-aqueous emulsions by poly(2-vinylpyridine)-b-poly(butadiene) block copolymers10.1016/j.colsurfa.2014.01.026 ↗
22. Nonaqueous emulsion polycondensation enabled by a self-assembled cage-like surfactant10.1002/chem.202104228 ↗
23. Formation and stability of nano-emulsions10.1016/j.cis.2003.10.023 ↗
24. Nanoemulsions: formation, properties and applications10.1039/C5SM02958A ↗
25. Fabrication of ultrafine edible emulsions: comparison of high-energy and low-energy homogenization methods10.1016/j.foodhyd.2012.04.009 ↗
26. Formation of polymeric nano-emulsions by a low-energy method and their use for nanoparticle preparation10.1016/j.jcis.2010.09.073 ↗
27. Nano-emulsions preparation by low energy methods in an ionic surfactant system10.1016/j.colsurfa.2006.02.013 ↗
28. Nano-emulsions: formation by low-energy methods10.1016/j.cocis.2012.07.003 ↗
29. Macroemulsion stability: the oriented wedge theory revisited10.1021/la950359e ↗
30. The effect of temperature on the phase equilibria and the types of dispersions of the ternary system composed of water, cyclohexane, and nonionic surfactant10.1016/0021-9797(68)90273-7 ↗
31. Phase inversion emulsification: current understanding and applications10.1016/j.cis.2015.01.001 ↗
32. Preparation of calcium alginate nanoparticles using water-in-oil (W/O) nanoemulsions10.1021/la204944j ↗
33. Modification of physical and thermal characteristics of stearic acid as a phase change materials using TiO2-nanoparticles10.1016/j.tca.2019.02.015 ↗
34. A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges10.1016/j.apenergy.2018.03.005 ↗
35. A novel composite Phase change material of Stearic Acid/Carbonized sunflower straw for thermal energy storage10.1016/j.matlet.2017.12.008 ↗
36. Silicone emulsions10.1016/j.cis.2006.11.023 ↗
37. Role of crystallinity on the thermal and viscous behaviour of polyethylene glycol-in-silicone oil (o/o) phase change emulsions10.1016/j.jiec.2021.08.003 ↗
38. Review on phase change material emulsions for advanced thermal management: design, characterization and thermal performance10.1016/j.rser.2022.112238 ↗
39. Preparation of paraffin and fatty acid phase changing nanoemulsions for heat transfer10.1016/j.tca.2014.12.020 ↗
40. Effect of nano-silica and silicone oil paraffin emulsion composite waterproofing agent on the water resistance of flue gas desulfurization gypsum10.1016/j.conbuildmat.2021.123055 ↗
41. Developing organogel-based Pickering emulsions with improved freeze-thaw stability and hesperidin bioaccessibility10.1016/j.foodhyd.2019.01.050 ↗
42. Subcooling in hexadecane emulsions10.1016/j.ijrefrig.2010.07.022 ↗
43. Subcooling in PCM emulsions - Part 2: interpretation in terms of nucleation theory10.1016/j.tca.2011.04.027 ↗
44. Development of highly stable paraffin wax/water phase change material nano-emulsions as potential coolants for thermal management10.1016/j.solmat.2023.112184 ↗
45. Experimental study on characteristics of a nano-enhanced phase change material slurry for low temperature solar energy collection10.1016/j.solmat.2020.110513 ↗
46. Effect of droplet size on the rheology of emulsions10.1002/aic.690421119 ↗
47. Chapter 17 - rheology of emulsions
48. Development of a novel phase change material emulsion for cooling systems10.1016/j.renene.2015.10.050 ↗
49. Nano-encapsulated PCM emulsions prepared by a solvent-assisted method for solar applications10.1016/j.solmat.2019.02.021 ↗
50. Improve the physical and oxidative stability of O/W emulsions by moderate solidification of the oil phase by stearic acid10.1016/j.lwt.2021.112120 ↗
51. Stearic acid based oleogels: a study on the molecular, thermal and mechanical properties10.1016/j.msec.2014.12.018 ↗
52. Evaluation of different methods for the determination of the plateau modulus and the entanglement molecular weight10.1016/j.polymer.2006.04.054 ↗
53. Textural perception of liquid emulsions: role of oil content, oil viscosity and emulsion viscosity10.1016/j.foodhyd.2010.09.015 ↗
54. Preparation and characterization of nano-sized phase change emulsions as thermal energy storage and transport media10.1016/j.apenergy.2017.01.012 ↗
55. Steffe · 1996
56. Experimental study of grease flow in pipelines: wall slip and air entrainment effects10.1016/j.cep.2004.09.003 ↗
57. Novel paraffin/ethylene propylene diene monomer phase change latex with excellent stability and low viscosity10.1016/j.solmat.2019.109957 ↗
58. Fatty acids as phase change materials: a review10.1016/j.rser.2013.08.107 ↗
59. Performance enhancement of a photovoltaic module using phase change material nanoemulsion as a novel cooling fluid10.1016/j.solmat.2021.111060 ↗