Modeling the current-voltage characteristics of Sb2Se3 thin film solar cells through Sah-Noyce-Shockley recombination model
Source abstract
Abstract
This study investigates the impact of various material parameters, such as film resistivity, the thickness of the absorber layer, uncompensated acceptor density, and carrier lifetime, on the carrier transport and device characteristics of emerging CdS/Sb2Se3 thin-film solar cells. The modeling approach is based on the rigorous Sah-Noyce-Shockley recombination model at the PN-junction, which is based on drift and diffusion collection efficiencies for total current-density calculations. The current-density and voltage have been optimized against the Sb2Se3 thickness and the depletion width at the CdS/Sb2Se3 junction. It has been determined that the lower efficiency of the cell is primarily due to the relatively short electron lifetime and the uncompensated acceptor density, which can widen or narrow the depletion width. The resistivity of the Sb2Se3 film can effectively control the voltage of the cell, however, the carrier lifetime can control this impact even to a higher extent. Therefore, the carrier lifetime and uncompensated acceptor densities are the two interdependent parameters that significantly control the current, voltage, and efficiency of the Sb2Se3 solar cells. This research provides valuable insights for the design and optimization of Sb2Se3 thin-film solar cells shedding light on carrier transport and charge collection mechanism in these emerging materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Economic Growth and Development
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Controlled conduction band offset in Sb2Se3 solar cell through introduction of (Zn,Sn)O buffer layer to improve photovoltaic performance: a simulation study10.1016/j.solmat.2023.112492 ↗
2. Towards high efficiency Cd-Free Sb2Se3 solar cells by the band alignment optimization10.1016/j.solmat.2020.110581 ↗
3. An analytical model for Sb2Se3 thin-film solar cells by considering current-voltage distortion10.1002/adts.202200438 ↗
4. Sb2Se3 heterostructure solar cells: techniques to improve efficiency10.1016/j.solener.2022.11.033 ↗
5. Sb2Se3 thin-film solar cells exceeding 10% power conversion efficiency enabled by injection vapor deposition technology10.1002/adma.202202969 ↗
6. Optimizing interface energy band alignment in Cd-free Sb2Se3 solar cells by controlling the oxygen content of In2(O,S)3 buffer layer to improve the efficiency: a simulation study10.1016/j.optlastec.2023.110107 ↗
7. Growth and optical properties of nanocrystalline Sb2Se3 thin-films for the application in solar-cells10.1016/j.solener.2020.10.001 ↗
8. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
9. Sb2Se3-sensitized inorganic-organic heterojunction solar cells fabricated using a single source precursor10.1002/anie.201308331 ↗
10. Magnetron sputtered Sb2Se3-based thin-films towards high performance quasi-homojunction thin-film solar cells10.1016/j.solmat.2019.110154 ↗
11. Thermal evaporation and characterization of Sb2Se3 thin-film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
12. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
13. High-efficiency Sb2Se3 thin-film solar cells based on Cd(S,O) buffer layers prepared via spin-coating10.1016/j.matchemphys.2023.127794 ↗
14. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
15. 6.5% Certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
16. Vapor transport deposition of antimony selenide thin-film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
17. 7.5% n-i-p Sb2Se3 solar cells with CuSCN as hole-transport layer10.1039/C9TA01773A ↗
18. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
19. Analysis of Sb2Se3/CdS based photovoltaic cell: a numerical simulation approach10.1016/j.jpcs.2018.05.045 ↗
20. A Baseline for the numerical study of Sb2Se3 absorber material based solar cell10.1166/jno.2019.2451 ↗
21. Towards high efficiency inverted Sb2Se3 thin film solar cells10.1016/j.solmat.2019.109945 ↗
22. Comparison of various thin-film-based absorber materials: a viable approach for next-generation solar cells10.3390/coatings12030405 ↗
23. Simulation of the Sb2Se3 solar cell with a hole transport layer
24. Regulating the p-n interface quality for Sb2Se3-based quasi-homojunction thin film solar cells by an effective two-step heat treatment process10.1016/j.jallcom.2023.170753 ↗
25. Physical device modeling of CdTe ultrathin film solar cells10.1016/j.solener.2016.02.046 ↗
26. Modeling the time-dependent characteristics of perovskite solar cells10.1016/j.solener.2018.05.082 ↗
27. Kosyachenko · Semicond. Sci. Technol. · 2007 · 22 · 91110.1088/0268-1242/22/8/015 ↗
28. Kosyachenko · Semiconductors · 2003 · 37 · 238
29. Optical and morphological properties of Ge-incorporated polycrystalline Sb2Se3 thin-film for photovoltaic applications10.1016/j.optmat.2023.113668 ↗
30. Optical properties of thin film Sb2Se3 and identification of its electronic losses in photovoltaic devices10.1016/j.solener.2021.09.025 ↗