journal article·2024-06Open access

Mitigating the corrosion of AISI 301LN steel in molten carbonate salts by doping with alumina nanoparticles for thermal energy storage applications

M. Morales, M. Rezayat, G. Fargas, A. Mateo

Abstract

Molten carbonate salt nanofluids have become an excellent strategy to enhance the power generation efficiency of the next-generation concentrated solar power (CSP) technology due to their excellent thermophysical properties at high temperatures. The corrosion behaviour in contact with salt nanofluids is one of the main issues to address for implementing cost-effective steels as construction materials for CSP. In the present work, the effects of molten salt nanofluids with Al2O3 nanoparticles (<50 nm and 1.0 wt%) on the corrosion behaviour of AISI 301LN stainless steel have been investigated. Corrosion tests were carried out in a static molten salt mixture of Li2CO3–Na2CO3–K2CO3 at 600 °C for 1000 h. Complementary electron microscopy, microanalysis and optical characterization techniques and micromechanical tests were carried out to study the oxide scales formed after corrosion tests in salt nanofluids and base salt of reference. Results evidenced that doping nanoparticles in molten salts significantly decreased the corrosion rate by ~50%, compared with a base salt. Incorporating nanoparticles into the oxide scale, forming a nanostructure of reticulated Al2O3 nanoparticles generated a more homogeneous and dense oxide scale, increasing its hardness about 30% and enhancing its effectiveness as a protective barrier.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
2. Introduction to concentrating solar power (CSP) technology
3. Fundamental principles of concentrating solar power (CSP) systems
4. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
5. Lessons learned from corrosion of materials with molten salts during molten salt tank preheating10.1016/j.solmat.2022.111943 ↗
6. Lithium in thermal energy storage: a state-of-the-art review10.1016/j.rser.2014.10.096 ↗
7. High-temperature molten salts for solar power application10.1016/B978-0-12-398538-5.00020-2 ↗
8. Molten salts: thermal energy storage and heat transfer media10.1007/s11669-011-9904-z ↗
9. 2050 LCOE improvement using new molten salts for thermal energy storage in CSP plants10.1016/j.rser.2015.12.148 ↗
10. Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts10.1016/j.solmat.2017.01.028 ↗
11. Progress in research and development of molten chloride salt technology for next generation concentrated solar power plants10.1016/j.eng.2020.06.027 ↗
12. Materials compatibility for the next generation of Concentrated Solar Power plants10.1016/j.ensm.2018.02.023 ↗
13. Gomez · 2011
14. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
15. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
16. Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants. Part 1: thermal treatment assessment10.1016/j.est.2019.101125 ↗
17. Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants. Part 2: materials screening performance10.1016/j.est.2020.101381 ↗
18. Mehos · 2017 · 1
19. Molten salt power towers operating at 600–650 °C: salt selection and cost benefits10.1016/j.solener.2018.01.063 ↗
20. Molten alkali carbonates as alternative engineering fluids for high temperature applications10.1016/j.apenergy.2019.03.190 ↗
21. Molten carbonate salts for advanced solar thermal energy power plants: cover gas effect on fluid thermal stability10.1016/j.solmat.2018.08.028 ↗
22. Carbonate molten salt solar thermal pilot facility: plant design, commissioning and operation up to 700 °C10.1016/j.renene.2019.11.045 ↗
23. Corrosion of steel alloys in eutectic NaCl+Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
24. Duplex stainless steels for thermal energy storage: characterization of oxide scales formed in carbonate salts at 500 °C
25. Corrosion evaluation of austenitic and duplex stainless steels in molten carbonate salts at 600 °C for thermal energy storage
26. Corrosion of Inconel 601 in molten salts for thermal energy storage10.1016/j.solmat.2017.07.036 ↗
27. Corrosion of 304 stainless steel in carbonates melt– a state of enhanced dissolution of corrosion products10.1016/j.corsci.2020.108535 ↗
28. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
29. Nanoparticles as molten salts thermophysical properties enhancer for concentrated solar power: a critical review10.1016/j.est.2021.103280 ↗
30. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications
31. Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power10.1016/j.solmat.2020.110650 ↗
32. Amorphous and partially-amorphous metal coatings for corrosion resistance in molten chloride salt10.1016/j.solmat.2019.110028 ↗
33. Nanoparticle-based anticorrosion coatings for molten salts applications10.1016/j.est.2022.106374 ↗
34. Fractal textured surfaces for high temperature corrosion mitigation in molten salts10.1016/j.solmat.2021.111281 ↗
35. Laser-induced carbonization of stainless steel as a corrosion mitigation strategy for high-temperature molten salts applications10.1016/j.est.2022.105972 ↗
36. Enhancing the corrosion resistance of 2205 duplex stainless steel in molten carbonate salts by laser-surface texturing10.1016/j.est.2023.110053 ↗
37. Laser wobbling surface texturing of AISI 301LN steel for enhancement of the corrosion resistance at high temperature10.1016/j.optlastec.2023.110375 ↗
38. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
39. Corrosion aspects of molten nitrate salt-based nanofluids for thermal energy storage applications10.1016/j.solener.2019.07.050 ↗
40. Development of molten nitrate salt based nanofluids for thermal energy storage application: high thermal performance and long storage components life-time10.1063/1.5117740 ↗
41. Nanoparticles as a high-temperature anticorrosion additive to molten nitrate salts for concentrated solar power10.1016/j.solmat.2019.110171 ↗
42. Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: a study under dynamic conditions10.1016/j.renene.2019.06.145 ↗
43. Unexpected effect of nanoparticles doping on the corrosivity of molten nitrate salt for thermal energy storage10.1016/j.solmat.2018.01.002 ↗
44. Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications10.1016/j.solmat.2019.110024 ↗
45. Effects of silica nanoparticles on enhancing the specific heat capacity of carbonate salt eutectic (work in progress)
46. Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant10.1016/j.solener.2011.05.004 ↗
47. Preparation and thermal properties characterization of carbonate salt/carbon nanomaterial composite phase change material10.1016/j.enconman.2015.03.051 ↗
48. The enhanced specific heat capacity of ternary carbonates nanofluids with different nanoparticles10.1016/j.solmat.2017.05.032 ↗
49. Nanofluids based on molten carbonate salts for high-temperature thermal energy storage: thermophysical properties, stability, compatibility and life cycle analysis10.1016/j.solmat.2020.110838 ↗
50. Schuller · 2012
51. The role of alkaline-earth additives on the molten carbonate corrosion of 316L stainless steel10.1016/j.corsci.2007.05.005 ↗
52. Experimental study on heat storage and corrosion properties of ternary carbonate salt-based ZnO nanofluids for solar thermal energy storage10.1007/s10973-022-11654-4 ↗
53. Corrosion evaluation of alumina-forming alloys in carbonate molten salt for CSP plants10.1016/j.renene.2019.03.087 ↗
54. Machining of austenitic stainless steels - a review
55. Materials selection for superheater tubes in municipal solid waste incineration plants10.1007/s11665-014-1100-y ↗
56. A review of circular economy prospects for stainless steelmaking slags10.1007/s40831-021-00392-w ↗
57. Martensitic transformation during fatigue testing of an AISI 301LN stainless steel10.1088/1757-899X/31/1/012010 ↗
58. Fatigue crack growth of a metastable austenitic stainless steel10.1016/j.ijfatigue.2015.06.029 ↗
59. Nanosecond pulsed laser surface processing of AISI 301LN steel: effect on surface topography and mechanical properties
60. Overview of surface modification strategies for improving the properties of metastable austenitic stainless steels
61. G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, (n.d.). https://www.astm.org/g0001-03r17e01.html (accessed February 17, 2024).
62. On the anticorrosion mechanism of molten salts based nanofluids10.1016/j.solmat.2021.111424 ↗
63. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
64. The effect of temperature on mechanical properties of oxide scales formed on a carbon steel in a simulated municipal solid waste incineration environment10.1016/j.surfcoat.2013.10.035 ↗
65. Oxidation behavior of iron-based alloy HCM12A exposed in supercritical water10.1016/j.corsci.2005.10.010 ↗
66. The corrosion behavior of Fe-Cr alloys containing Co, Mn, and/or Ni and of a Co-base alloy in the presence of molten (Li,K)-carbonate10.1002/maco.19970481103 ↗
67. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °C10.1016/j.solmat.2015.08.011 ↗
68. Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power10.1016/j.rser.2019.109328 ↗
69. Dependence of strain rate on hydrogen-induced hardening of austenitic stainless steel investigated by nanoindentation10.1016/j.ijhydene.2019.03.250 ↗
70. Nanoindentation hardness and corrosion studies of additively manufactured 316L stainless steel10.1007/s11665-022-06703-w ↗
71. Microstructure and nanoindentation behavior of FeCoNiAlTi high-entropy alloy-reinforced 316L stainless steel composite fabricated by selective laser melting10.3390/ma16052022 ↗
72. Microstructure and mechanical properties of AISI 347 stainless steel/A335 low alloy steel dissimilar joint produced by gas tungsten arc welding10.1016/j.matdes.2013.03.029 ↗
73. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
74. High-temperature corrosion behavior of austenitic stainless steel in quaternary nitrate molten salt nanofluids for concentrated solar power10.1016/j.solmat.2022.111851 ↗