journal article·2022-12

Synthesis and investigation of solution-processed Bi-doped Cu2ZnSn(S, Se)4 thin-film solar cells

Na Zhao, Yingrui Sui, Fancong Zeng, Meiling Ma, Tianyue Wang, Zhanwu Wang, Lili Yang, Fengyou Wang, Huilian Liu, Bin Yao

Publisher page

Abstract

Surface morphology plays a crucial role in influencing the film quality and photoelectric conversion efficiency (PCE) of a Kesterite Cu 2ZnSn(S, Se) 4 (CZTSSe) solar cell. Herein, the bismuth (Bi) doping strategy to improve the surface morphology of the solution-processed CZTSSe film for high solar cell efficiency is reported. With a two-step selenization strategy to facilitate the Bi-doped CZTSSe (CZTBiSSe) phase formation, improving the crystalline quality of the absorber, increasing the carrier mobility, and reducing the band tailing, a cell efficiency of 6.94% has been achieved. These results demonstrate the significance of Bi doping into CZTSSe to improve the device`s performance. This work offers new insights into the effects of Bi doping on CZTSSe via a solution-processed approach and provides a deeper understanding of the origin of the efficiency improvement of Bi-doped CZTSSe thin film solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Cu2ZnSnS4-Pt and Cu2ZnSnS4-Au heterostructured nanoparticles for photocatalytic water splitting and pollutant degradation10.1021/ja502076b ↗
2. Insights into the role of the interface defects density and the bandgap of the back surface field for efficient p-type silicon heterojunction solar cells10.1039/C7RA04018K ↗
3. Fabrication of earth abundant Cu2ZnSnSSe4 (CZTSSe) thin film solar cells with cadmium free zinc sulfide (ZnS) buffer layers10.1016/j.jallcom.2016.11.178 ↗
4. Talia Gershon, Geoffroy Hautier, Earth abundant and emerging solar energy conversion materials
5. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
6. Influence of alkali metals (Na, Li, Rb) on the performance of electrostatic spray-assisted vapor deposited Cu2ZnSn(S, Se)4 solar cells10.1038/srep22109 ↗
7. Ge bidirectional diffusion to simultaneously engineer back interface and bulk defects in the absorber for efficient CZTSSe solar cells
8. Substitution of Ag for Cu in Cu2ZnSn(S, Se)4: toward wide band gap absorbers with low antisite defects for thin film solar cells10.3390/nano10010096 ↗
9. Enhancing the performance of aqueous solution-processed Cu2ZnSn(S, Se)4 photovoltaic materials by Mn2+ substitution10.3390/nano10071250 ↗
10. Strengthening the properties of earth-abundant Cu2ZnSn(S, Se)4 photovoltaic materials via cation incorporation with Ni10.1021/acsaem.1c03687 ↗
11. A new insight of In-doped Cu2ZnSn(S, Se)4 thin films for photovoltaic application10.1016/j.jallcom.2020.154492 ↗
12. Structural, optical and electrical properties of indium doped Cu2ZnSn(S, Se)4 thin films synthesized by the DC and RF reactive magnetron cosputtering10.1016/j.ceramint.2021.03.160 ↗
13. Enhancement of photosensitivity in bismuth doped Cu2ZnSnS4 thin films10.1002/pssr.201600335 ↗
14. Sodium assisted sintering of chalcogenides and its application to solution processed Cu2ZnSn(S, Se)4 thin film solar cells10.1021/cm403504u ↗
15. Effect of Cd content and sulfurization on structures and properties of Cd doped Cu2SnS3 thin films10.1016/j.jallcom.2017.05.291 ↗
16. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
17. Composition and band-gap-tunable synthesis of wurtzite-derived Cu2ZnSn(S1-xSex)4 nanocrystals: theoretical and experimental insights10.1021/nn3052296 ↗
18. Direct synthesis of single-phase p-type SnS by electrodeposition from a dicyanamide ionic liquid at high temperature for thin film solar cells10.1021/jp311552g ↗
19. Indium effect on structural, optical and electrical properties of Cu2InxZn1-xSnS4 alloy thin films for solar cell10.1016/j.spmi.2017.07.015 ↗
20. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
21. Structural, electronic, and optical properties of Cu2NiSnS4: a combined experimental and theoretical study toward photovoltaic applications10.1021/acs.chemmater.7b00149 ↗
22. XPS analysis and characterization of thin films Cu2ZnSnS4 grown using a novel solution based route10.1016/j.mssp.2015.05.064 ↗
23. Morphological evolution and structural properties of Cu2ZnSn(S, Se)4 thin films deposited from single ceramic target by a one-step sputtering process and selenization without H2Se10.1016/j.jallcom.2015.04.103 ↗
24. Facile hydrothermal synthesis of hydrotropic Cu2ZnSnS4 nanocrystal quantum dots: band-gap engineering and phonon confinement effect10.1039/c3ta00357d ↗
25. Regulating crystal growth via organic lithium salt additive for efficient Kesterite solar cells10.1016/j.nanoen.2021.106405 ↗
26. Synthesis and investigation of environmental protection and earth-abundant kesterite Cu2MgxZn1-xSn(S, Se)4 thin films for solar cells10.1016/j.ceramint.2018.05.167 ↗
27. Anti-solvent surface engineering via diethyl ether to enhance the photovoltaic conversion efficiency of perovskite solar cells to 18.7610.1016/j.spmi.2017.12.015 ↗
28. A study on structural formation and optical properties of Zn1-xCdxO thin films synthesized by the DC and RF reactive magnetron co-sputtering10.1016/j.jallcom.2016.03.302 ↗
29. Erratum: wurtzite-derived polytypes of kesterite and stannite quaternary chalcogenide semiconductors10.1103/PhysRevB.83.159904 ↗
30. Solvothermal synthesis and tunable bandgap of Cu2(Zn1−xCox)SnS4 and Cu2(Fe1−xCox)SnS4 nanocrystals10.1016/j.jallcom.2015.05.176 ↗
31. Synthesis and characterization of multicomponent Cu2(FexZn1−x)SnS4 nanocrystals with tunable band gap and structure10.1039/c3ta00191a ↗
32. Bandgap engineering of Cu2InxZn1−xSn(S, Se)4 alloy films for photovoltaic applications10.1016/j.ceramint.2017.10.137 ↗
33. Na-doping-induced modification of the Cu2ZnSn(S, Se)4/CdS heterojunction towards efficient solar cells10.1016/j.jechem.2020.09.007 ↗
34. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% shockley–queisser limit10.1002/adfm.202101927 ↗
35. Defect engineering in earth‐abundant Cu2ZnSn(S, Se)4 photovoltaic materials via Ga3+‐doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
36. Investigation of optimum Mg doping content and annealing parameters of Cu2MgxZn1-xSnS4 thin films for solar cells10.3390/nano9070955 ↗
37. Bismuth-ion doped Cu(In, Ga)Se2 thin films: preparation, microstructures, and electrical properties10.1016/j.solmat.2013.12.023 ↗
38. Gradient bandgap modification for highly efficient carrier transport in antimony sulfide-selenide tandem solar cells10.1016/j.solmat.2022.111926 ↗
39. Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications10.1016/j.apsusc.2022.153169 ↗
40. Improving the back electrode interface quality of Cu2ZnSn(S, Se)4 thin-film solar cells using a novel CuAlO2 buffer layer10.1021/acsaem.8b02247 ↗
41. 8% efficiency Cu2ZnSn(S, Se)4 (CZTSSe) thin film solar cells on flexible and lightweight molybdenum foil substrates10.1021/acsami.9b03195 ↗
42. Cao
43. Impact of Urbach energy on open-circuit voltage deficit of thin-film solar cells10.1016/j.solmat.2020.110502 ↗