Epitaxial lift-off process for GaAs solar cells controlled by InGaAs internal sacrificial stressor layers and a PMMA surface stressor
Source abstract
Abstract
Epitaxial lift-off (ELO) techniques enable the development of thin-film III–V solar cell devices that are flexible and lightweight. To this end, we report an ELO process employing an internal sacrificial stressor layer (ISSL) and a surface polymer (PMMA) stressor layer. The combined action enhances the lateral etching rate and promotes a more controllable release process. The ISSL consists of quantum well-like GaInAs heterostructures that enable an accurate control of the stress required to enhance the lateral etching of the sacrificial layer, and hence the release of the thin film. More specifically, the use of the ISSL results in about 5-fold faster etch rate of the AlAs sacrificial layer. The ISSL layers can be etched away after the lift-off. Likewise, the PMMA surface stressor, which serves also as a sacrificial intermediate transfer layer, can be easily removed. The proof-of-concept device demonstration of the enhanced ELO technique was made by fabricating single-junction GaAs solar cells. The solar cell performance was evaluated under AM1.5d illumination and by external quantum efficiency measurements. Modelling based analysis shows that although the GaAs solar cell would require improvement of the front contact, yet the novel release process was successfully validated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: solar cell performance optimization · Semiconductor Quantum Structures and Devices · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Kishi · 1991
2. Flexible solar cells for clothing10.1016/S1369-7021(06)71542-5 ↗
3. Dhere · 2002
4. Multi-junction III-V solar cells: current status and future potential10.1016/j.solener.2004.09.018 ↗
5. 40% efficient metamorphic GaInP/GaInAs/Ge multijunction solar cells10.1063/1.2734507 ↗
6. 40.8% efficient inverted triple junction solar cell with two independent metamorphic junctions10.1063/1.2988497 ↗
7. Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentration10.1038/s41560-020-0598-5 ↗
8. Highly efficient single-junction GaAs thin-film solar cell on flexible substrate10.1038/srep30107 ↗
9. Wafer reuse for repeated growth of III-V solar cells10.1002/pip.930 ↗
10. Epitaxial lift-off GaAs solar cell from a reusable GaAs substrate10.1016/S0921-5107(96)02029-6 ↗
11. Cardwell · 2018 · 3511
12. Back reflector with diffractive gratings for light-trapping in thin-film III-V solar cells10.1109/ESPC47532.2019.9049262 ↗
13. High rate epitaxial lift-off of inGaP films from GaAs substrates10.1063/1.126276 ↗
14. Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronics10.1038/ncomms2583 ↗
15. High efficiency GaAs thin film solar cells by peeled film technology10.1016/0022-0248(78)90449-9 ↗
16. Extreme selectivity in the lift-off of epitaxial GaAs films10.1063/1.98946 ↗
17. Epitaxial lift-off of InGaAs solar cells from InP substrate using a strained AlAs/InAlAs superlattice as a novel sacrificial layer10.1016/j.solmat.2019.02.013 ↗
18. Wafer curvature in molecular beam epitaxy grown heterostructures10.1103/PhysRevB.67.054108 ↗
19. Simultaneous determination of Poisson ratio, bulk lattice constant, and composition of ternary compounds: in0.3Ga0.7As, In0.3Al0.7As, In0.7Ga0.3P, and In0.7Al0.3P10.1063/1.1425954 ↗
20. Band parameters for III/V compound semiconductors and their alloys10.1063/1.1368156 ↗
21. Separation-rate improvement of epitaxial lift-off for III-V solar cells
22. Analysis · 2010
23. Improvement in separation rate of epitaxial lift-off by hydrophilic solvent for GaAs solar cell applications10.1016/j.solmat.2013.12.013 ↗
24. Thin film GaAs solar cells with increased quantum efficiency due to light reflection10.1016/j.solmat.2003.11.030 ↗
25. Increased performance of thin-film GaAs solar cells by rear contact/mirror patterning10.1016/j.tsf.2018.05.042 ↗
26. PC1D version 5: 32-BIT solar cell modeling on personal computers
27. PC1D Version 4 for windows: from analysis to design