journal article·2022-07

Thermophysical properties of LiF–LiCl–Li2CO3 eutectic mixture/multi-walled carbon nanotubes for thermal energy storage

Zeyang Kang, Jimin Xu, Hui Liu, Yuwen Lin, Xiangyang Liu, Maogang He

Publisher page

Abstract

Latent heat thermal energy storage based on solid-liquid phase change material has a huge potential in dealing with mismatch between energy demand and supply. LiF–LiCl–Li 2CO 3 ternary system was screened out for high temperature energy storage material due to its good thermophysical properties. Its eutectic composition ( X LiF = 28.41 mol%, X LiCl = 55.09 mol% and X Li2CO3 = 16.50 mol%) was predicted based on the developed thermodynamic model and verified experimentally. The melting point, phase change latent heat, heat capacity, thernal diffusivity, thermal conductivity and thermal stability of LiF–LiCl–Li 2CO 3 eutectic mixture were measured. And the influence of the addition of multi-walled carbon nanotubes (MWCNTs) were analyzed. It was found that adding MWCNTs could increase the latent heat, specific heat capacity, thermal diffusivity and thermal conductivity of LiF–LiCl–Li 2CO 3 eutectic mixture, while didn`t significantly change the melting temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Ab-initio molecular dynamics study on thermal property of NaCl-CaCl2 molten salt for high-temperature heat transfer and storage10.1016/j.renene.2020.08.152 ↗
2. Effects of partly-filled encapsulated phase change material on the performance enhancement of solar thermochemical reactor
3. Thermal performance of a binary carbonate molten eutectic salt for high-temperature energy storage applications10.1016/j.apenergy.2019.114418 ↗
4. Thermal properties and thermal stability of the ternary eutectic salt NaCl-CaCl2-MgCl2 used in high-temperature thermal energy storage process10.1016/j.apenergy.2017.03.096 ↗
5. Design and investigation of the novel ZnCl2 based ternary chloride salts with low-temperature for sensible energy storage10.1016/j.applthermaleng.2020.114917 ↗
6. Experimental investigation and thermodynamic modeling of an innovative molten salt for thermal energy storage (TES)10.1016/j.apenergy.2017.12.069 ↗
7. Applications and technological challenges for heat recovery, storage and utilisation with latent thermal energy storage10.1016/j.apenergy.2020.116277 ↗
8. Barin · 1977
9. Review on micro/nano phase change materials for solar thermal applications10.1016/j.renene.2019.03.088 ↗
10. Review on system and materials requirements for high temperature thermal energy storage. Part 1: general requirements10.1016/j.rser.2016.11.119 ↗
11. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
12. Review on nanoencapsulated phase change materials: preparation, characterization and heat transfer enhancement10.1016/j.nanoen.2015.02.016 ↗
13. Preparation and enhanced thermal conductivity of molten salt nanofluids with nearly unaltered viscosity10.1016/j.renene.2019.04.153 ↗
14. Effect of surface active agent on thermal properties of carbonate salt/carbon nanomaterial composite phase change material10.1016/j.apenergy.2015.07.058 ↗
15. Preparation and thermal properties characterization of carbonate salt/carbon nanomaterial composite phase change material10.1016/j.enconman.2015.03.051 ↗
16. Superior thermal energy storage performance of NaCl-SWCNT composite phase change materials: a molecular dynamics approach10.1016/j.apenergy.2021.116799 ↗
17. Heat transfer enhancement of phase change materials for thermal energy storage applications: a critical review10.1016/j.rser.2017.01.169 ↗
18. Thermal properties characterization of chloride salts/nanoparticles composite phase change material for high-temperature thermal energy storage10.1016/j.apenergy.2020.114674 ↗
19. Enhanced thermal conductivity of ternary carbonate salt phase change material with Mg particles for solar thermal energy storage10.1016/j.apenergy.2017.07.027 ↗
20. Specific heat capacity improvement of molten salt for solar energy applications using charged single-walled carbon nanotubes10.1016/j.apenergy.2019.04.167 ↗
21. Thermal behavior of polyethylene glycol based phase change materials for thermal energy storage with multiwall carbon nanotubes additives10.1016/j.energy.2019.05.163 ↗
22. Assessment of a novel ternary eutectic chloride salt for next generation high-temperature sensible heat storage10.1016/j.enconman.2018.04.100 ↗
23. Technical and economic analysis of a CSP plant presenting a low freezing ternary mixture as storage and transfer fluid10.1016/j.apenergy.2020.114676 ↗
24. Phase diagram predictive model for a ternary mixture of calcium, sodium, and potassium nitrate10.1021/acssuschemeng.9b04472 ↗
25. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
26. FactSage thermochemical software and databases, 2010-2016
27. Insight into effects of molten KNO3-NaNO2-NaNO3 volumetric absorption of solar radiation from different factors by absorption spectroscopy10.1016/j.molliq.2019.03.063 ↗
28. A novel model for predicting the effective specific heat capacity of molten salt doped with nanomaterial for solar energy application10.1016/j.applthermaleng.2021.117129 ↗
29. Novel key parameter for eutectic nitrates based nanofluids selection for concentrating solar power (CSP) systems10.1016/j.apenergy.2018.10.114 ↗
30. High-temperature stability of nitrate/nitrite molten salt mixtures under different atmospheres10.1016/j.apenergy.2018.05.101 ↗
31. Thermophysical properties enhancement of ternary carbonates with carbon materials for high-temperature thermal energy storage10.1016/j.solener.2017.07.010 ↗
32. Performance enhancement of bromide salt by nano-particle dispersion for high-temperature heat pipes in concentrated solar power plants10.1016/j.apenergy.2019.01.026 ↗
33. Effects of MWNTs on phase change enthalpy and thermal conductivity of a solid-liquid organic PCM10.1007/s10973-008-9275-9 ↗
34. Improving thermal energy storage and transfer performance in solar energy storage: nanocomposite synthesized by dispersing nano boron nitride in solar salt10.1016/j.solmat.2021.111378 ↗
35. Different dimensional nanoadditives for thermal conductivity enhancement of phase change materials: fundamentals and applications10.1016/j.nanoen.2021.105948 ↗
36. Carbon-based composite phase change materials for thermal energy storage, transfer, and conversion
37. Thermal-physical properties of nanoparticle-seeded nitrate molten salts10.1016/j.renene.2017.12.026 ↗
38. Janz · 1979
39. Specific heat of aligned multiwalled carbon nanotubes10.1088/0957-4484/16/9/013 ↗
40. Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer10.1016/j.apenergy.2015.11.045 ↗