Thermal oxidation of stainless steel substrate with tunable spectral selectivity: Transition from a reflecting to a highly absorbing Cr–Fe spinel surface
Source abstract
Abstract
Abstract The conventional methods of obtaining solar selective surfaces for high temperature solar thermal applications involve coating of the substrate by various methods such as physical vapor deposition, plasma spraying, anodization, etc. The present work is an attempt to enhance the optical properties of metals by heat treatment. The oxide layers formed by annealing of stainless steel 304 (SS 304) enhance the absorptance in the solar spectrum region. Influences of oxidation temperature and oxidation time span on the values of solar absorptance and thermal emittance have been studied. The annealing of SS 304 substrate was carried out in air at 600–900 °C. The time period of annealing plays a crucial role in the amount of oxides formed and thus is a variable parameter. The absorptance values obtained with isothermal oxidation at shorter and longer durations have been compared at a temperature of 900 °C. A cyclic loading approach is also employed to arrive at the optimal absorptance of the samples. It is further used to study the dependency of solar absorptance on the reaction kinetics with respect to varying oxidation time. Under the optimized annealing conditions, heat-treated SS 304 sample exhibited an absorptance of 0.920 and an emittance of 0.37. A plausible model for the high optical absorption in these oxidized surfaces with relatively low thermal emittance is rationalized. High temperature materials such as Inconel and Nimonic have also been subjected to isothermal annealing and the absorptance values were found to be 0.887 and 0.880, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high- temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. Status and future development prospects of CSP
3. Solar selective coatings and materials for high-temperature solar thermal applications
4. Kennedy · 2002
5. Spectral emittance measurements of micro/nanostructures in energy conversion: a review10.1007/s11708-020-0693-0 ↗
6. Surface modification of AISI 316L stainless steel by oxynitrocarburizing for solar collector applications10.18086/eurosun2018.10.11 ↗
7. Spectral selectivity of a thermally oxidized stainless steel10.1016/0165-1633(82)90095-8 ↗
8. The selective solar absorptance of in-situ grown oxide films on metals10.1016/0165-1633(81)90015-0 ↗
9. Optical selectivity of oxidized stainless steel
10. Optical constants and spectral selectivity of stainless steel and its oxides10.1063/1.331503 ↗
11. A highly thermally stable Mn–Cu–Fe composite oxide based solar selective absorber layer with low thermal loss at high temperature10.1016/j.jallcom.2015.05.038 ↗
12. Simms
13. Composition vs. depth profiles obtained with Auger electron spectroscopy of air oxidized stainless steel surfaces10.1063/1.1663236 ↗
14. About the role of chromium and oxygen ion diffusion on the growth mechanism of oxidation films of the AISI 304 austenitic stainless steel10.1007/s11085-012-9301-y ↗
15. Corrosion process of stainless steel 441 with heated steam at 1000°C10.1515/htmp-2015-0238 ↗
16. Evaluation of the material properties of the multilayered oxides formed on HCM12A using new and novel techniques10.1007/s11085-015-9551-6 ↗
17. A Raman study of the systems Fe3-xCrxO4 and FexCrxO310.1016/0022-4596(89)90245-4 ↗
18. Hosterman
19. Raman fingerprint of chromate, aluminate and ferrite spinels10.1002/jrs.4764 ↗
20. XPS and morphological properties of Cr2O3 thin films grown by thermal evaporation method10.1016/j.rinp.2017.08.036 ↗
21. Dmitry Pushin, Effect of annealing on the structural, optical and surface properties of chromium oxide (Cr2O3) thin films deposited by e-beam evaporation for plasma etching applications10.1016/j.jallcom.2021.160087 ↗
22. Study of oxide protective layers on stainless steel by AES, EDS and XPS10.1002/sia.2718 ↗
23. Dynamics of CrO-FeO catalysts during the high temperature water-gas shift reaction: molecular structures and reactivity10.1021/acscatal.6b01281 ↗
24. Study of Fe diffusion in Cr2O3 by secondary ion mass spectrometry10.4028/www.scientific.net/DDF.237-240.940 ↗
25. Thermodynamics of Cr2O3, FeCr2O4, ZnCr2O4 and CoCr2O410.1016/j.jct.2007.03.001 ↗
26. Theoretical study of steam grown oxides as a function of temperature, pressure and p(O2)10.3184/096034005782750455 ↗
27. Jepson
28. Breakdown and evolution of the protective oxide scales of AISI 304 and AISI 316 stainless steels under high-temperature oxidation10.1155/2011/824676 ↗
29. Mikkelson
30. Optical properties of some metal oxides in solar absorbers10.1088/0031-8949/25/6A/044 ↗
31. Oxidation of AISI 304 and AISI 439 stainless steels10.1016/j.msea.2006.10.022 ↗
32. Stainless steel mirrors – a material feasibility study10.1016/0165-1633(89)90039-7 ↗
33. Optical properties of thermally evaporated Cr2O3 thin films
34. Investigation of optical properties of iron, chromium and nickel oxide base coatings10.1016/0927-0248(92)90028-N ↗
35. Structural, optical and electrical characterization of Fe3O4 thin films prepared using PVD magnetron sputtering (RF)
36. Optical properties of chromium oxide thin films deposited by electron-beam evaporation10.1016/j.optmat.2005.11.020 ↗
37. Dispersion of chromia films (eskolaite) in UV-VIS10.2478/jee-2019-0039 ↗
38. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
39. Green, Light trapping properties of pyramidally textured surfaces10.1063/1.339189 ↗
40. Modeling the effects of surface roughness on the emissivity of aluminium alloys10.1016/j.ijheatmasstransfer.2006.04.037 ↗