journal article·2021-01Open access

Implementation and understanding of p+ fired rear hole selective tunnel oxide passivating contacts enabling >22% conversion efficiency in p-type c-Si solar cells

Andrea Ingenito, Sofia Libraro, Philippe Wyss, Christophe Allebé, Matthieu Despeisse, Sylvain Nicolay, Franz-Josef Haug, Christophe Ballif

Abstract

Abstract Passivating contacts are key enablers for high efficiency c-Si solar cells. Here, we present our latest advancement in terms of implementation and understanding in fired passivating contacts (FPC) used as rear p + passivating contact in p-type solar cells. We study three different layer configurations and show that the microstructural layer properties play a major role on the surface passivation and charge carrier transport. Upon optimization we demonstrate implied open circuit voltage of 722 mV corresponding to saturation current density of ~7 fA/cm2 and contact resistances below 10 mΩ cm2, when metallized with ITO/Ag. P-type c-Si solar cells employing a screen-printed P-diffused emitter co-fired with the FPC on the rear side with conversion efficiency up to 22.5% are demonstrated. Temperature-dependent measurements on test structures and solar cells reveal that tunneling is the main transport mechanism for FPC layers that crystallize during the firing process, whereas for more amorphous FPC layers, an additional component due to thermionic emission is also present. Finally, we present the efficiency potential of solar cells employing the developed FPC layer as hole selective rear side passivating contact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
2. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. The role of hydrogenation and gettering in enhancing the efficiency of next-generation Si solar cells: an industrial perspective
4. Silicon solar-cell processing for minimizing the influence of impurities and defects10.1007/s11664-002-0030-x ↗
5. Direct observation of the impurity gettering layers in polysilicon-based passivating contacts for silicon solar cells10.1021/acsaem.8b00367 ↗
6. Effective impurity gettering by phosphorus- and boron-diffused polysilicon passivating contacts for silicon solar cells10.1016/j.solmat.2017.11.004 ↗
7. Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells10.1016/j.solmat.2017.05.055 ↗
8. Electrical and optical properties of heat-treated silicon10.1103/PhysRev.105.1751 ↗
9. Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells10.1016/j.solmat.2016.06.040 ↗
10. Poly-Si(O)x passivating contacts for high-efficiency c-Si IBC solar cells10.1016/j.egypro.2017.09.257 ↗
11. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
12. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
13. Phosphorus-diffused polysilicon contacts for solar cells10.1016/j.solmat.2015.06.001 ↗
14. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
15. Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cells10.1063/1.4940364 ↗
16. Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cells
17. Phosphorous-doped silicon carbide as front-side full-area passivating contact for double-side contacted c-Si solar cells
18. Silicon-rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
19. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
20. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
21. Feldmann · 2019 · 9
22. “Approaching 23 % with large ‐ area monoPoly cells using screen ‐ printed and fired rear passivating contacts fabricated by inline PECVD,” no
23. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
24. ITRPV · 2018
25. Fast and slow lifetime degradation in boron-doped Czochralski silicon described by a single defect10.1002/pssr.201600096 ↗
26. “Degradation of crystalline silicon due to boron – oxygen defects
27. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
28. Analysis of hydrogen distribution and migration in fired passivating contacts10.1016/j.solmat.2019.110018 ↗
29. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
30. Contributions to the contact resistivity in fired tunnel-oxide passivating contacts for crystalline silicon solar cells
31. The doped Si/SiO2 interface10.1016/0038-1101(81)90008-3 ↗
32. Electronic and structural properties of doped amorphous and nanocrystalline silicon deposited at low substrate temperatures by radio-frequency plasma-enhanced chemical vapor deposition10.1116/1.1586275 ↗
33. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
34. “Introducing pinhole magnification by selective etching : application to poly-Si on ultra-thin silicon oxide films10.1016/j.egypro.2017.09.270 ↗
35. Strategies for doped nanocrystalline silicon integration in silicon heterojunction solar cells10.1109/JPHOTOV.2016.2571619 ↗
36. Numerical simulations of hole carrier selective contacts in p-type c-Si solar cells10.1016/j.solmat.2019.109937 ↗
37. Schroder · 2006
38. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
39. 22 . 61 % efficient fully screen printed PERC solar
40. Evaluation of determination methods of the Si/Al contact resistance of screen-printed passivated emitter and rear solar cells10.1063/1.4867188 ↗
41. Green · 1986