Modeling of degradation in normal and inverted OSC devices
Source abstract
Abstract
Abstract Degradation of organic solar cells (OSC) remains a problem which has prevented its commercial exploitation. While there are several experimental studies pointing towards different reasons behind the atmospheric degradation of these devices, yet a microscopic understanding is lacking. Here, we present a combined experimental and modeling study to understand the degradation in the electrical characteristics of OSC in normal and inverted architectures, further correlated with the interfacial degradation. Our investigations show that degradation of current density – voltage (J-V) characteristics of normal devices is extremely fast i.e. 50% in 9 h as against 21 days for inverted devices. Interestingly, degradation in normal devices is driven primarily by a decrease in short circuit current density (Jsc) without appearance of S-shape in J-V characteristics while degraded inverted devices exhibit S-shaped J-V characteristics. Modeling of J-V data along with time dependent capacitance-voltage (C-V) analysis suggests that the degradation in normal OSC devices can be modeled using degradation induced reduced effective area theory supporting the formation of Al2O3 pockets at the cathode-active layer interface which grow exponentially with storage time eventually forming a continuous layer. In contrast, inverted devices degrade much slowly, via deterioration of hole transporting MoO3 layer resulting in increased anode barrier height and reduced surface recombination velocity (Sp) at anode causing a S shaped J-V curve due to decreased carrier extraction rate. The study clearly highlights the differences between the way two differences architectures and elucidates the underlying reasons.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Inverted P3HT:PCBM organic solar cells on low carbon steel substrates10.1016/j.solener.2016.03.061 ↗
2. Mechanically robust, ITO-free, 4.8% efficient, all-solution processed organic solar cells on flexible PET foil10.1016/j.solmat.2014.07.005 ↗
3. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
4. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
5. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
6. Improved lifetimes of organic solar cells with solution-processed molybdenum oxide anode-modifying layers10.1002/pip.2512 ↗
7. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
8. The stability of normal vs. inverted organic solar cells under highly damp conditions: comparison with the same interfacial layers10.1016/j.solmat.2014.04.036 ↗
9. Baselines for lifetime of organic solar cells10.1002/aenm.201600910 ↗
10. Roll and roll-to-roll process scaling through development of a compact flexo unit for printing of back electrodes10.1016/j.solmat.2015.04.007 ↗
11. Effects of oxygen and illumination on the photovoltaic properties of organic solar cells based on phthalocyanine: fullerene bulk heterojunction10.1063/1.2722674 ↗
12. Imbalanced charge mobility in oxygen treated polythiophene/fullerene based bulk heterojunction solar cells10.1063/1.3279135 ↗
13. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
14. Comparative degradation and regeneration of polymer solar cells with different cathodes10.1021/am500637n ↗
15. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
16. Recent progress in degradation and stabilization of organic solar cells10.1016/j.jpowsour.2014.04.080 ↗
17. Influence of aging climate and cathode adhesion on organic solar cell stability10.1016/j.solmat.2017.03.037 ↗
18. Pathway for recovery of photo-degraded polymer solar cells by post degradation thermal anneal10.1016/j.solmat.2017.02.012 ↗
19. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
20. A compact physical model for morphology induced intrinsic degradation of organic bulk heterojunction solar cell10.1063/1.3610460 ↗
21. Effects of annealing and degradation on regioregular polythiophene-based bulk heterojunction organic photovoltaic devices10.1016/j.solmat.2010.07.021 ↗
22. Interfacial layer engineering for performance enhancement in polymer solar cells10.3390/polym7020333 ↗
23. Interfacial thermal degradation in inverted organic solar cells10.1063/1.4938554 ↗
24. Layer by layer characterisation of the degradation process in PCDTBT:PC71BM based normal architecture polymer solar cells10.1016/j.orgel.2016.10.029 ↗
25. Optical absorption study of P3HT:PCBM blend photo-oxidation for bulk heterojunction solar cells10.1016/j.solener.2016.05.009 ↗
26. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
27. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
28. Influence of photo-induced degradation on the optoelectronic properties of regioregular poly(3-hexylthiophene)10.1016/j.solmat.2008.01.002 ↗
29. Fused thiophene/quinoxaline low band gap polymers for photovoltaic's with increased photochemical stability10.1016/j.solmat.2011.07.016 ↗
30. Photo-degradation and stabilization effects in operating organic photovoltaic devices by joint photo-current and morphological monitoring10.1016/j.solmat.2008.02.019 ↗
31. All-in-one solar cell: stable, light-soaking free, solution processed and efficient diketopyrrolopyrrole based small molecule inverted organic solar cells10.1016/j.solmat.2016.01.013 ↗
32. Degradation mechanisms in organic solar cells: localized moisture encroachment and cathode reaction10.1016/j.solmat.2012.04.038 ↗
33. Grain size dependence of degradation of aluminium/calcium cathodes in organic solar cells following exposure to humid air10.1016/j.solmat.2015.03.015 ↗
34. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
35. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
36. Enhanced absorbance and electron collection in inverted organic solar cells: optical admittance and transient photocurrent analyses10.1016/j.orgel.2014.03.032 ↗
37. Role of hole playing in improving performance of organic light-emitting devices with an Al2O3 layer inserted at the cathode-organic interface10.1063/1.2220013 ↗
38. A study of stabilization of P3HT/PCBM organic solar cells by photochemical active TiOx layer10.1016/j.solmat.2010.12.030 ↗
39. Influence of cathode oxidation via the hole extraction layer in polymer: fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
40. Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer10.1016/j.tsf.2009.07.015 ↗
41. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
42. Inkjet printing of NiO films and integration as hole transporting layers in polymer solar cells10.1038/s41598-017-01897-9 ↗
43. Solution processed vanadium pentoxide as charge extraction layer for organic solar cells10.1002/aenm.201100076 ↗
44. Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode10.1063/1.3580629 ↗
45. Cesium carbonate as a functional interlayer for polymer photovoltaic devices10.1063/1.2937202 ↗
46. Energy level evolution of air and oxygen exposed molybdenum trioxide films10.1063/1.3454779 ↗
47. First principles study of photo-oxidation degradation mechanisms in P3HT for organic solar cells10.1039/C4CP00146J ↗
48. Formation and impact of hot spots on the performance of organic photovoltaic cells10.1063/1.3073857 ↗
49. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
50. Exciton delocalization incorporated drift-diffusion model for bulk-heterojunction organic solar cells10.1063/1.4970958 ↗
51. Device model for the operation of polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.085205 ↗
52. Sensitivity analysis of current generation in organic solar cells—comparing bilayer, sawtooth, and bulk heterojunction morphologies10.1016/j.solmat.2012.12.004 ↗
53. Intensity dependent but temperature independent charge carrier generation in organic photodiodes and solar cells10.1016/j.orgel.2013.01.011 ↗
54. Buffer layers in inverted organic solar cells and their impact on the interface and device characteristics: an experimental and modeling analysis10.1016/j.orgel.2016.06.031 ↗
55. Mechanisms of device degradation in organic solar cells: influence of charge injection at the metal/organic contacts10.1016/j.orgel.2013.04.036 ↗
56. Evaluating effect of surface state density at the interfaces in degraded bulk heterojunction organic solar cell10.1016/j.physb.2011.08.086 ↗
57. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
58. Degradation analysis of PCDTBT:PC71BM organic solar cells-an insight10.1016/j.cap.2015.12.007 ↗
59. S. Züfle, M.T. Neukom, S. Altazin, M. Zinggeler, M. Chrapa, T. Offermans, B. Ruhstaller, An effective area approach to model lateral degradation in organic solar cells, Adv. Energy Mater., 5, n/a-n/a.10.1002/aenm.201500835 ↗
60. Understanding the role of thickness and morphology of the constituent layers on the performance of inverted organic solar cells10.1016/j.solmat.2013.03.027 ↗
61. Spatially resolved photocurrent measurements of organic solar cells: tracking water ingress at edges and pinholes10.1016/j.solmat.2012.10.027 ↗
62. L.S. Pali, S.K. Gupta, A. Garg, Organic solar cells on Al electroded opaque substrates: assessing the need of ZnO as electron transport layer, Sol. Energy, 160, pp. 396–403.10.1016/j.solener.2017.12.028 ↗
63. A. Guerrero, L.s.F. Marchesi, P.P. Boix, S. Ruiz-Raga, T. Ripolles-Sanchis, G. Garcia-Belmonte, J. Bisquert, How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells, ACS Nano, vol. 6, pp. 3453–3460.10.1021/nn300486a ↗
64. Patterns of efficiency and degradation of composite polymer solar cells10.1016/j.solmat.2004.02.028 ↗
65. Z. Kam, Q. Yang, X. Wang, B. Wu, F. Zhu, J. Zhang, J. Wu, Enhanced absorbance and electron collection in inverted organic solar cells: Optical admittance and transient photocurrent analyses, Org. Electron., 15, pp. 1306–1311.10.1016/j.orgel.2014.03.032 ↗
66. E. Voroshazi, G. Uytterhoeven, K. Cnops, T. Conard, P. Favia, H. Bender, R. Muller, D. Cheyns, Root-cause failure analysis of photocurrent loss in polythiophene:fullerene-based inverted solar cells, ACS Appl. Mater. Interfaces, 7, pp. 618–623.10.1021/am506771e ↗
67. A. Savva, I. Burgués-Ceballos, G. Papazoglou, S.A. Choulis, High-performance inverted organic photovoltaics without hole-selective contact, ACS Appl. Mate. Interfaces, 7, pp. 24608–24615.10.1021/acsami.5b06578 ↗
68. R.T. White, E.S. Thibau, Z.-.H. Lu, Interface structure of MoO3 on organic semiconductors, Sci. Rep., 6, p. 21109.10.1038/srep21109 ↗
69. Origins of improved hole-injection efficiency by the deposition of MoO3 on the polymeric semiconductor poly(dioctylfluorene-alt-benzothiadiazole)10.1002/adfm.200901022 ↗
70. M.T. Greiner, L. Chai, M.G. Helander, W.-.M. Tang, Z.-.H. Lu, Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies, Adv. Funct. Mater., 22, pp.4557–4568.10.1002/adfm.201200615 ↗
71. B. Dasgupta, W.P. Goh, Z.E. Ooi, L.M. Wong, C.Y. Jiang, Y. Ren, E.S. Tok, J. Pan, J. Zhang, S.Y. Chiam, Enhanced extraction rates through gap states of molybdenum oxide anode buffer, J. Phys. Chem. C, 117, pp. 9206–9211.10.1021/jp3114013 ↗
72. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
73. N.K. Elumalai, A. Saha, C. Vijila, R. Jose, Z. Jie, S. Ramakrishna, Enhancing the stability of polymer solar cells by improving the conductivity of the nanostructured MoO3 hole-transport layer, Phys. Chem. Chem. Phys., 15, pp. 6831–6841.10.1039/c3cp50994j ↗