Overcoming electrical and mechanical challenges of continuous wave laser processing for Ni–Cu plated solar cells
Source abstract
Abstract
Abstract Continuous wave laser processes used to create solar cells with selective emitter and plated Ni–Cu front contacts are a widely discussed topic. Particularly low adhesion of the front metal contact has been identified as a serious challenge. In this work a detailed surface characterization of laser doped and patterned front sides of solar cells shows that formation of silicon oxynitride hinders nickel silicide formation and reduces contact adhesion of Ni–Cu plated contacts. In order to overcome the observed tradeoff between metal contact adhesion and penetration of the pn-junction, this paper presents a novel process sequence based on the formation of a deep selective emitter using a green continuous waver laser and subsequent patterning of the dielectric using a nanosecond-pulsed laser.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. B.S. Tjahjono, M.J. Yang, C.Y. Lan, J. Ting, A. Sugianto, H. Ho, N. Kuepper, B. Beilby, T. Szpitalak, S.R. Wenham, 18.9% Efficient laser doped selective emitter solar cell on industrial grade p-type czochralski wafer, in: 25th European Photovoltaic Solar Energy Conference and Exhibition/Fifth World Conference on Photovoltaic Energy Conversion, 6–10 September 2010, Valencia, Spain, September, 2010, pp. 1396–1400.
2. Buried contact silicon solar cells10.1016/0927-0248(94)90029-9 ↗
3. Add-on laser tailored selective emitter solar cells10.1002/pip.1007 ↗
4. T. Lauermann, A. Dastgheib-shirazi, F. Book, B. Raabe, G. Hahn, H. Haverkamp, D. Habermann, C. Demberger, C. Schmid, INSECT: an inline selective emitter concept with high efficiencies at competitive process costs improved with inkjet masking technology, in: 24th European Photovoltaic Solar Energy Conference, 21–25 September 2009, Hamburg, Germany, 2009, pp. 1767–1770.
5. D. Kray, N. Bay, G. Cimiotti, S. Kleinschmidt, N. Kosterke, A. Losel, M. Sailer, A. Trager, H. Kuhnlein, H. Nussbaumer, C. Fleischmann, F. Granek, Industrial LCP selective emitter solar cells with plated contacts, in: 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 667–671.10.1109/PVSC.2010.5616896 ↗
6. Z. Shi, S. Wenham, J. Ji, Mass production of the innovative PLUTO solar cell technology, in: 34th IEEE Photovoltaic Specialists Conference, 2009, pp. 1922–1926.10.1109/PVSC.2009.5411566 ↗
7. L. Tous, M. Aleman, R. Russell, E. Cornagliotti, P. Choulat, A. Uruena, S. Singh, J. John, F. Duerinckx, J. Poortmans, R. Mertens, Evaluation of advanced p-PERL and n-PERT large area silicon solar cells with 20.5% energy conversion efficiencies, Prog. Photovolt.: Res. Appl. (2014), 10.1002/pip.2478
8. A. Lennon, Y. Yao, S. Wenham, Evolution of metal plating for silicon solar cell metallisation, Prog. Photovolt.: Res. Appl. 21, (2013), 1454–1468, 10.1002/pip.2221.
9. Micro characterization of laser structured solar cells with plated NiAg contacts10.1016/j.solmat.2013.05.036 ↗
10. A. Sugianto, J. Bovatsek, S. Wenham, B. Tjahjon, G. Xu, Y. Ya, B. Hallam, X. Bai, N. Kuepper, C.M. Chong, R. Patel, 18.5% laser-doped solar cell on cz p-type silicon, in: 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 689–694.10.1109/PVSC.2010.5616914 ↗
11. A. Mondon, J. Bartsch, M. Kamp, A. Brand, B. Steinhauser, N. Bay, J. Horzel, M. Glatthaar, S. Glunz, Presented at the 29th European PV Solar Energy Conference and Exhibition, 22–26 September 2014, Amsterdam, The Netherlands, September, 2014, pp. 22–26.
12. R. Russell, L. Tous, H. Philipsen, J. Horzel, E. Cornagliotti, M. Ngamo, P. Choulat, R. Labie, J. Beckers, J. Bertens, M. Fujii, J. John, J. Poortmans, R. Mertens, A simple copper metallisation process for high efficiencies and reliable modules, in: 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, Germany, 2012, pp. 538–543.
13. J. Horzel, N. Bay, T. Knarozovski, M. Passig, M. Sieber, J. Burschik, H. Kühnlein, A. Letize, B. Lee, D. Weber, R. Böhme, R. Sastrawa, K. Vosteen, H. Nussbaumer, S. Keller, P. Fath, Low cost high efficiency metallisation using Ni/Cu based contacts for next generation industrial solar cells, in: Proceedings of the Eighth SNEC, Shanghai, China, 2014.
14. Benefit of selective emitters for p-type silicon solar cells with passivated surfaces10.1109/JPHOTOV.2012.2230685 ↗
15. Influence of laser power on the properties of laser doped solar cells10.1016/j.solmat.2010.12.006 ↗
16. M.D. Abbott, Advanced laser processing and photoluminescence characterisation of high efficiency silicon solar cells (Ph.D. thesis), University of New South Wales, Sydney, Australia, June 2006.
17. A. Karpour, B.S. Tjahjono, S.R. Wenham, Advanced electroless plating of high efficiency silicon solar cells, in: 24th European Photovoltaic Solar Energy Conference, 21–25 September 2009, Hamburg, Germany, September, 2009, pp. 1465–1468.
18. Uniform plating of thin nickel layers for silicon solar cells10.1016/j.egypro.2013.07.350 ↗
19. The properties of electroless nickel
20. A.M. Wenham, M.A. Green, R.S. Wenham, Metal Adhesion, 2010.
21. A. Karpour, S.R. Wenham, The importance of surface roughness in the adhesion of electroless-plated metal in inkjet printed grooves, in: Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE, IEEE, 2010, pp. 1410–1413.10.1109/PVSC.2010.5614406 ↗
22. M.G. Coleman, R.A. Pryor, T.G. Sparks, The Pd2Si-/Pd/-Ni-solder plated metallization system for silicon solar cells, in: Photovoltaic Specialists Conference, 13th, Washington, DC, 1978, pp. 597–602.
23. Electrochemical deposition of buried contacts in high-efficiency crystalline silicon photovoltaic cells10.1149/1.1528943 ↗
24. Microstructure analysis of the interface situation and adhesion of thermally formed nickel silicide for plated nickel copper contacts on silicon solar cells10.1016/j.solmat.2013.06.005 ↗
25. Electronic band structure of TM silicides
26. Localization and characterization of annealing-induced shunts in Ni-plated monocrystalline silicon solar cells10.1002/pssr.201409036 ↗
27. Record large-area p-type CZ production cell efficiency of 19.3% based on LDSE technology10.1109/JPHOTOV.2011.2164392 ↗
28. Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell10.1016/j.solmat.2011.07.030 ↗
29. Etch rates for micromachining processing10.1109/84.546406 ↗
30. Micro-photoluminescence spectroscopy on metal precipitates in silicon10.1002/pssr.200903221 ↗
31. Luminescence emission from forward- and reverse-biased multicrystalline silicon solar cells10.1063/1.3256199 ↗
32. Electrical breakdown in semiconductors10.1002/pssa.2210080202 ↗
33. Observation of metal precipitates at prebreakdown sites in multicrystalline silicon solar cells10.1063/1.3272682 ↗
34. Chemical stability of Si n+ species in SiOx (x<2) thin films10.1116/1.1323972 ↗
35. Electron escape depth in silicon10.1016/0368-2048(74)80029-0 ↗
36. Chemical reactions of N2 ion beams with group IV elements and their oxides10.1016/0368-2048(78)85047-6 ↗
37. Generation of XPS Auger lines by bremsstrahlung10.1016/0368-2048(80)85008-0 ↗
38. Synthesis and characterization of amorphous Si, N, O10.1111/j.1151-2916.1994.tb04664.x ↗
39. Comparison of composition of ultra-thin silicon oxynitride layers fabricated by PECVD and ultrashallow rf plasma ion implantation
40. XPS and FTIR study of silicon oxynitride thin films10.1016/S0955-2219(97)00051-4 ↗
41. Laser–silicon interaction for selective emitter formation in photovoltaics. I. Numerical model and validation10.1063/1.4768537 ↗
42. Laser–silicon interaction for selective emitter formation in photovoltaics. II. Model applications10.1063/1.4768540 ↗
43. Fast simulation code for heating, phase changes and dopant diffusion in silicon laser processing using the alternating direction explicit (ADE) method10.1007/s00339-009-5416-7 ↗
44. Kinetics and mechanism of the thermal decomposition of Si3N410.1111/j.1151-2916.1973.tb12687.x ↗
45. High-temperature thermodynamics of the silicon, nitrogen, silicon–nitride system
46. Thermodynamic analysis of the high temperature stability of silicon nitride and silicon carbide10.1016/0390-5519(76)90022-3 ↗
47. Formation of silicon oxinitride from Si3N4 and SiO2 in the presence of Al2O310.1016/0272-8842(84)90017-8 ↗
48. Milek · 1971
49. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
50. Selective laser ablation of SiNx layers on textured surfaces for low temperature front side metallizations10.1002/pip.856 ↗
51. J. Wendt, M. Träger, M. Mette, A. Pfennig, B. Jaeckel, The link between mechanical stress induced by soldering and micro damages in silicon solar cells, in: 24th European Photovoltaic Solar Energy Conference, 21–25 September 2009, Hamburg, Germany, 2009, pp. 3420–3423.