journal article·2014-11

Enhanced performance of polymer solar cells by dipole-assisted hole extraction

Jian Wang, Fujun Zhang, Lingliang Li, Qiaoshi An, Jian Zhang, Weihua Tang, Feng Teng

Publisher page

Abstract

Polymer solar cells (PSCs) with different anode buffer layers were fabricated to investigate dipole-assisted hole extraction on the performance improvement of PSCs. The power conversion efficiency (PCE) of PSCs was increased from 4.77% to 6.18% with 29.6% improvement due to the increased short circuit current density (Jsc) from 12.00 to 15.65 mA/cm2 induced by the oriented LiF dipole-assisted hole extraction. More hole could be swept-out from the active layers by oriented LiF dipole/PEDOT:PSS combined anode buffer layers. The dipole-assisted hole extraction could be further demonstrated from the J–V curves of hole-only devices with different anode buffer layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. 25th Anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
3. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
4. High-efficiency polymer solar cells enhanced by solvent treatment10.1002/adma.201204306 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration10.1016/j.solmat.2008.12.001 ↗
7. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
8. Exciton dissociation and charge-transport enhancement in organic solar cells with quantum-dot/N-doped CNT hybrid nanomaterials10.1002/adma.201204454 ↗
9. The role of N-doped multiwall carbon nanotubes in achieving highly efficient polymer bulk heterojunction solar cells10.1021/nl304533j ↗
10. Selective electron- or hole-transport enhancement in bulk-heterojunction organic solar cells with N- or B-doped carbon nanotubes10.1002/adma.201003296 ↗
11. The underlying reason of DIO additive on the improvement polymer solar cells performance10.1016/j.apsusc.2014.03.041 ↗
12. Enhanced performance of polymer solar cells through sensitization by a narrow band gap polymer10.1016/j.solmat.2013.07.050 ↗
13. Improved efficiency of bulk heterojunction polymer solar cells by doping low-bandgap small molecules10.1021/am500074s ↗
14. Enhanced performance of polymer solar cells by employing ternary cascade energy structure10.1039/C4CP01411A ↗
15. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
16. Effects of cathode modification using spin-coated lithium acetate on the performances of polymer bulk-heterojunction solar cells10.1063/1.4773570 ↗
17. High efficient inverted polymer solar cells with different annealing treatment10.1016/j.msec.2012.01.008 ↗
18. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
19. Interface materials for organic solar cells10.1039/b921624c ↗
20. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
21. Polymer- and carbon-based electrodes for polymer solar cells: toward low-cost, continuous fabrication over large area10.1016/j.solmat.2011.12.022 ↗
22. High polymer/fullerene ratio realized in efficient polymer solar cells by tailoring of the polymer side-chains10.1002/adma.201305577 ↗
23. Efficient small bandgap polymer solar cells with high fill factors for 300nm thick films10.1002/adma.201300017 ↗
24. Effects of solvent-treated PEDOT: PSS on organic photovoltaic devices10.1016/j.renene.2013.06.042 ↗
25. Semi-crystalline random conjugated copolymers with panchromatic absorption for highly efficient polymer solar cells10.1039/c3ee40689j ↗
26. Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells10.1016/j.solmat.2011.09.006 ↗
27. Energy level alignment and sub-bandgap charge generation in polymer:fullerene bulk heterojunction solar cells10.1002/adma.201204495 ↗
28. Efficient hybrid organic–inorganic light emitting diodes with self-assembled dipole molecule deposited metal oxides10.1063/1.3453759 ↗
29. Energy level alignment and morphology of interfaces between molecular and polymeric organic semiconductors10.1016/j.orgel.2007.04.010 ↗
30. The characteristics of the small molecule organic solar cells with PEDOT: PSS/LiF double anode buffer layer system10.1016/j.solmat.2009.12.014 ↗
31. Electrostatically self-assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
32. Effects of thickness and thermal annealing of the PEDOT:PSS layer on the performance of polymer solar cells10.1016/j.orgel.2008.10.003 ↗