journal article·2024-07

Design optimization of solar collectors with hybrid nanofluids: An integrated ansys and machine learning study

Omer A. Alawi, Haslinda Mohamed Kamar, Ali H. Abdelrazek, A.R. Mallah, Hussein A. Mohammed, Raad Z. Homod, Zaher Mundher Yaseen

Publisher page

Abstract

The current study discussed the integration between two computational approaches to evaluate the hydrothermal properties, such as pressure drop (ΔP), energy efficiency (η eng), and absorbed energy (Q abs) of solar collectors using hybrid nanofluids. The physical problem was solved through a 3D model using Ansys 2021R1. After that, the three outputs were predicted through MATLAB R2022b using Optimize a Boosted Regression Ensemble by implementing Least-Squares Boosting (LSBoost) with Bayesian optimization (BO). Various working fluids were tested: distilled water (DW), Graphene oxide (GO-DW) nanofluids, and hybrid graphene oxide/silicon dioxide (GO/SiO 2-DW) nanofluids in the mixing ratio (50:50), in the concentration range 0.01-1 vol%. The simulations covered a range of Reynolds numbers (300 ≤ Re ≤ 1500) and inlet temperatures (30 °C, 40 °C, 50 °C, and 60 °C). The results indicated that, the maximum variation compared to the first and second validations for mass flow rates and different nanofluid concentrations was between 3.96-4.71% and 4.32–6.45%. At an inlet temperature of 30 °C, GO-DW-1% exhibited the highest ΔP, η eng, and Q abs, while GO-SiO 2-DW-1% closely followed with slightly lower energy values. The maximum errors between computational fluid dynamics and machine learning predictions for (ΔP), (η eng), and (Q abs) ranged from 2.40% to 6.32%, depending on the type of nanofluids (single or hybrid) and the volume concentration. To conclude, the current approach showed a promising result in the photothermal devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Nanofluid Flow and Heat Transfer · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. A comprehensive review on nanofluid operated solar flat plate collectors10.1007/s10973-019-08514-z ↗
2. Nanofluids for flat plate solar collectors: fundamentals and applications10.1016/j.jclepro.2020.125725 ↗
3. Optimal model-free adaptive control based on reinforcement Q-Learning for solar thermal collector fields10.1016/j.engappai.2023.106785 ↗
4. Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: a review10.1016/j.jclepro.2021.126119 ↗
5. Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake10.1016/j.nanoen.2021.106069 ↗
6. An overview of sustainability of heat exchangers and solar thermal applications with nanofluids: a review10.1016/j.rser.2021.110855 ↗
7. Recent advances on nanofluids for low to medium temperature solar collectors: energy, exergy, economic analysis and environmental impact10.1016/j.pecs.2020.100898 ↗
8. A comprehensive analysis of nanofluids and their practical applications for flat plate solar collectors: fundamentals, thermophysical properties, stability, and difficulties10.1016/j.egyr.2022.03.088 ↗
9. A comparative analysis of biomass torrefaction severity index prediction from machine learning10.1016/j.apenergy.2022.119689 ↗
10. Optimization of a vertical axis wind turbine with a deflector under unsteady wind conditions via Taguchi and neural network applications10.1016/j.enconman.2022.115209 ↗
11. A fast implementation of coalitional model predictive controllers based on machine learning: application to solar power plants10.1016/j.engappai.2022.105666 ↗
12. Thermophysical profile of graphene oxide and MXene hybrid nanofluids for sustainable energy applications: model prediction with a Bayesian optimized neural network with K-cross fold validation10.1016/j.flatc.2023.100501 ↗
13. Thermal performance of hybrid fly ash and copper nanofluid in various mixture ratios: experimental investigation and application of a modern ensemble machine learning approach10.1016/j.icheatmasstransfer.2021.105731 ↗
14. The effect of pH on stability and thermal performance of graphene oxide and copper oxide hybrid nanofluids for heat transfer applications: application of novel machine learning technique10.1016/j.jechem.2023.04.001 ↗
15. A novel machine learning based computing algorithm in modeling of soiled photovoltaic module
16. Modeling of solar energy systems using artificial neural network: a comprehensive review10.1016/j.solener.2019.01.037 ↗
17. Performance of hybrid neuro-fuzzy model for solar radiation simulation at Abuja, Nigeria: a correlation based input selection technique
18. Modelling and optimization of transparent parabolic trough collector based on gas-phase nanofluids10.1016/j.renene.2013.03.014 ↗
19. Hybrid optimization algorithm for thermal analysis in a solar parabolic trough collector based on nanofluid10.1016/j.energy.2015.01.096 ↗
20. Thermodynamic analysis and optimization of an integrated Rankine power cycle and nano-fluid based parabolic trough solar collector10.1016/j.enconman.2016.05.029 ↗
21. Exergoeconomic analysis and optimization of a solar driven dual-evaporator vapor compression-absorption cascade refrigeration system using water/CuO nanofluid10.1016/j.jclepro.2016.08.125 ↗
22. Analysing the performance of a flat plate solar collector with silver/water nanofluid using artificial neural network10.1016/j.procs.2016.07.178 ↗
23. Application of artificial neural network for performance prediction of a nanofluid-based direct absorption solar collector
24. Energy and exergy evaluation of the evacuated tube solar collector using Cu2O/water nanofluid utilizing ANN methods
25. The stability and thermophysical properties of Al2O3-graphene oxide hybrid nanofluids for solar energy applications: application of robust autoregressive modern machine learning technique10.1016/j.solmat.2023.112207 ↗
26. A two-phase closed thermosyphon operated with nanofluids for solar energy collectors: thermodynamic modeling and entropy generation analysis10.1016/j.solener.2020.09.031 ↗
27. Numerical investigation and experimental verification of performance enhancement of flat plate solar collector using nanofluids10.1016/j.applthermaleng.2017.11.027 ↗
28. Enhancing the efficiency of a symmetric flat-plate solar collector via the use of rutile TiO2-water nanofluids
29. An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets–water nanofluids10.1007/s10973-019-08153-4 ↗
30. The effect of vortex generator insert and TiO2/Water nanofluid on thermal efficiency and heat transfer of flat plate solar collector
31. Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids
32. Simultaneous energy storage enhancement and pressure drop reduction in flat plate solar collectors using rotary pipes with nanofluid10.1016/j.enbuild.2021.110855 ↗
33. Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids10.1016/j.energy.2021.120452 ↗
34. Energy, exergy and economic (3E) analysis of flat-plate solar collector using novel environmental friendly nanofluid10.1038/s41598-023-27491-w ↗
35. Nanofluids in solar thermal collectors: review and limitations10.1007/s10765-020-02737-1 ↗
36. Experimental and computational determination of heat transfer, entropy generation and pressure drop under turbulent flow in a tube with fly ash-Cu hybrid nanofluid10.1016/j.ijthermalsci.2021.107016 ↗
37. Investigation of entropy generation and thermohydraulic characteristics of Al2O3–CuO hybrid nanofluid flow in a pipe at different inlet fluid temperatures
38. Rheology and thermal conductivity of graphene oxide and coal fly ash hybrid nanofluids for various particle mixture ratios for heat transfer applications: experimental study10.1016/j.icheatmasstransfer.2022.106408 ↗
39. Efficiency analysis of thermosyphon solar flat plate collector with low mass concentrations of ND–Co3O4 hybrid nanofluids: an experimental study10.1007/s10973-020-10176-1 ↗
40. Thermal efficiency, heat transfer, and friction factor analyses of MWCNT+ Fe3O4/water hybrid nanofluids in a solar flat plate collector under thermosyphon condition10.3390/pr9010180 ↗
41. Experimental and numerical investigations on the effect of Al2O3/TiO2H2O nanofluids on thermal efficiency of the flat plate solar collector10.1016/j.renene.2017.10.102 ↗
42. Thermal performance enhancement of a flat plate solar collector using hybrid nanofluid10.1016/j.solener.2020.04.034 ↗
43. Increasing heat transfer in flat plate solar collectors using various forms of turbulence-inducing elements and CNTs-CuO hybrid nanofluids10.1016/j.csite.2022.101909 ↗
44. Evaluation of energy efficiency, visualized energy, and production of environmental pollutants of a solar flat plate collector containing hybrid nanofluid
45. Influence of using innovative turbulators on the exergy and energy efficacy of flat plate solar collector with DWCNTs-TiO2/water nanofluid
46. Smart modeling by using artificial intelligent techniques on thermal performance of flat‐plate solar collector using nanofluid10.1002/ese3.381 ↗
47. Thermal behavior estimation of a solar wall operated by TiO2 nanofluids using several machine learning models10.1007/s40430-022-03425-x ↗
48. Numerical investigating the effect of Al2O3-water nanofluids on the thermal efficiency of flat plate solar collectors10.1016/j.egyr.2022.05.012 ↗
49. Using Bayesian optimization and ensemble boosted regression trees for optimizing thermal performance of solar flat plate collector under thermosyphon condition employing MWCNT-Fe3O4/water hybrid nanofluids
50. Improving the thermal efficiency of a solar flat plate collector using MWCNT-Fe3O4/water hybrid nanofluids and ensemble machine learning10.1016/j.csite.2022.102448 ↗
51. Synthesis, characterization, stability, and thermal properties of graphene oxide based hybrid nanofluids for thermal applications: experimental approach10.1016/j.diamond.2022.109265 ↗
52. Hydrothermal and energy analysis of flat plate solar collector using copper oxide nanomaterials with different morphologies: economic performance
53. Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of multi-walled carbon nanotubes with different outside diameters10.1080/08916152.2020.1847215 ↗
54. Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of graphene nanoplatelets with different specific surface areas10.1016/j.applthermaleng.2020.115142 ↗
55. Thermohydraulic performance of thermal system integrated with twisted turbulator inserts using ternary hybrid nanofluids10.1515/ntrev-2022-0504 ↗
56. Data-driven predictive control of building energy consumption under the IoT architecture10.1155/2020/8849541 ↗
57. Solid particle erosion rate predictions through LSBoost10.1016/j.powtec.2021.04.072 ↗
58. A novel framework based on the stacking ensemble machine learning (SEML) method: application in wind speed modeling10.3390/atmos13050758 ↗
59. Solubility predictions through LSBoost for supercritical carbon dioxide in ionic liquids10.1039/D0NJ03868G ↗
60. Bayesian optimization for adaptive experimental design: a review10.1109/ACCESS.2020.2966228 ↗
61. Optimizing thermal transport in graphene nanoribbon based on phonon resonance hybridization10.1016/j.mtphys.2021.100445 ↗
62. Bayesian optimization for chemical products and functional materials10.1016/j.coche.2021.100728 ↗
63. Designing thermal radiation metamaterials via a hybrid adversarial autoencoder and Bayesian optimization10.1364/OL.453442 ↗
64. Prediction of tubular solar still performance by machine learning integrated with Bayesian optimization algorithm10.1016/j.applthermaleng.2020.116233 ↗
65. Bayesian optimization for materials design with mixed quantitative and qualitative variables
66. A novel Bayesian optimization for flow condensation enhancement using nanorefrigerant: a combined analytical and experimental study10.1016/j.ces.2019.115465 ↗
67. Efficient closed-loop maximization of carbon nanotube growth rate using bayesian optimization10.1038/s41598-020-64397-3 ↗
68. A novel global solar exposure forecast model based on air temperature: designing a new multi-processing ensemble deep learning paradigm10.1016/j.eswa.2023.119811 ↗
69. Multi-steps drought forecasting in arid and humid climate environments: development of integrative machine learning model10.1016/j.agwat.2023.108210 ↗
70. Evaluation and prediction of groundwater quality for irrigation using an integrated water quality indices, machine learning models and GIS approaches: a representative case study10.3390/w15040694 ↗
71. Machine learning models development for shear strength prediction of reinforced concrete beam: a comparative study10.1038/s41598-023-27613-4 ↗
72. Thermodynamic evaluation and optimization of a flat plate collector operating with alumina and iron mono and hybrid nanofluids
73. Numerical analysis of porous flat plate solar collector under thermal radiation and hybrid nanoparticles using two-phase model
74. Investigation of the effect of hybrid CuO-Cu/water nanofluid on the solar thermal energy storage system10.1016/j.est.2022.104675 ↗
75. Influence of water based binary composite nanofluids on thermal performance of solar thermal technologies: sustainability assessments