Effect of secondary phases controlled by precursor composition on the efficiency of CZTS thin film solar cell
Source abstract
Abstract
Copper Zinc Tin Sulfide (CZTS) has emerged as a promising photo absorber material for thin film solar cell applications. However, the efficiency of CZTS based solar cell is predominantly governed by the presence and absence of various secondary phases. Identification and estimation of these phases are very crucial for understanding the parameters controlling the formation of these phases. In this work, CZTS thin films are prepared on soda lime glass by magnetron co-sputtering of Cu, Zn, and Sn followed by sulfurization. Precursor composition is varied to control the secondary phase formation during the growth of CZTS layer. Study of various secondary phases formed is done using XANES spectroscopy. Other analyses, like XRD, Raman spectroscopy and optical absorption spectroscopy are used to confirm the results from XANES. It is observed that precursor composition plays a vital role in the selective formation of secondary phase during the growth of CZTS layer. An interesting observation is that bandgap of the secondary phase vis-à-vis CZTS plays a key role in determining the device efficiency. This study highlights that different secondary phases deteriorate the device efficiency in different manner. Secondary phase with much higher band gap then absorber layer deteriorates the device efficiency less compared to the secondary phase having bandgap closer to absorber layer. This also brings out the importance of identification of secondary phase that impact the device efficiency to a greater extent and process parameter that controls its formation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. CZTS-based materials and interfaces and their effects on the performance of thin film solar cells10.1002/pssr.201409219 ↗
2. Effect of heating rate and precursor composition on secondary phase formation during Cu2ZnSnS4 thin film growth and its properties10.1016/j.tsf.2021.139029 ↗
3. Determination of secondary phases in kesterite Cu 2ZnSnS 4 thin films by x-ray absorption near edge structure analysis10.1063/1.3671994 ↗
4. Solar conversion efficiency and distribution of ZnS secondary phase in Cu2ZnSnS4 solar cells10.1016/j.solmat.2016.01.025 ↗
5. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
6. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by Engineering of local chemical environment10.1002/adma.202005268 ↗
7. Dependence of CZTS thin film properties and photovoltaic performance on heating rate and sulfurization time10.1016/j.jallcom.2023.171283 ↗
8. The effect of annealing conditions: temperature, time, ramping rate and atmosphere on nanocrystal Cu2ZnSnS4 (CZTS) thin film solar cell properties, Mater
9. Optimization of sulfurization time and temperature for fabrication of Cu2ZnSnS4 (CZTS) thin films10.1016/j.spmi.2018.12.012 ↗
10. Phase evolution pathways of kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 thin films during the annealing of sputtered Cu-Sn-Zn metallic precursors10.1016/j.solener.2016.09.043 ↗
11. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
12. Impact of sulfurization parameters on properties of CZTS thin films grown using quaternary target10.1007/s10854-020-04582-2 ↗
13. Investigation on the sulfurization temperature dependent phase and defect formation of sequentially evaporated Cu-rich CZTS thin films10.1016/j.solener.2020.03.007 ↗
14. Effect of ambient gas on grain growth of CZTS layer : study on device efficiency
15. Detailed investigations on influence of precursor stacking and sulfurization for Cu2ZnSnS4 film formation10.1016/j.tsf.2018.01.038 ↗
16. Influence of sulfurization pressure on Cu2ZnSnS4 thin films and solar cells prepared by sulfurization of metallic precursors10.1016/j.jpowsour.2014.09.088 ↗
17. An 8.7% efficiency co-electrodeposited Cu 2 ZnSnS 4 photovoltaic device fabricated via a pressurized post-sulfurization process10.1039/C8TC05058A ↗
18. Tin disulfide segregation on CZTS films sulfurized at high pressure10.1016/j.matlet.2015.11.090 ↗
19. Effects of sulfurization pressure on the conversion efficiency of cosputtered Cu2ZnSnS4 thin film solar cells10.1155/2015/750846 ↗
20. Imaging and phase identification of Cu 2 ZnSnS 4 thin films using confocal Raman spectroscopy
21. Raman mapping of MoS2 at Cu2ZnSnS4/Mo interface in thin film10.1016/j.solener.2020.05.043 ↗
22. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
23. Phase transformation during Cu2ZnSnS4 synthesis by reactive magnetron co-sputtering10.1016/j.actamat.2016.03.009 ↗
24. Discrimination and detection limits of secondary phases in Cu2ZnSnS4 using X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2014.08.028 ↗
25. CZTS-based materials and interfaces and their effects on the performance of thin film solar cells10.1002/pssr.201409219 ↗
26. Cu2Sn1-xGexS3 (x = 0:17) thin-film solar cells with high conversion efficiency of 6.0
27. Deposition and characterization of Cu2SnS3 thin films by co-evaporation for photovoltaic application10.1016/j.solmat.2015.06.049 ↗
28. A study of ternary Cu2SnS3 and Cu3SnS 4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
29. Spray pyrolyzed Cu 2 SnS 3 thin films for photovoltaic application spray pyrolyzed Cu 2 SnS 3 thin films for photovoltaic application
30. Kësterite thin films for photovoltaics: a review10.1051/epjpv/2012008 ↗
31. Determination of secondary phases in kesterite Cu 2 ZnSnS 4 thin films by x-ray absorption near edge structure analysis
32. Depth distribution of secondary phases in kesterite Cu2ZnSnS4 by angle-resolved X-ray absorption spectroscopy10.1063/1.5000306 ↗
33. Influence of the Cu2ZnSnS4 absorber thickness on thin film solar cells
34. Evolution of silicon wafer cleaning technology
35. Novel XAFS capabilities at ELETTRA synchrotron light source10.1088/1742-6596/190/1/012043 ↗
36. ATHENA, artemis, hephaestus: data analysis for X-ray absorption spectroscopy using IFEFFIT10.1107/S0909049505012719 ↗
37. States in the gap10.1016/0022-3093(72)90194-9 ↗
38. How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV-vis spectra10.1021/acs.jpclett.8b02892 ↗
39. Cu2ZnSnS4-based thin films and solar cells by rapid thermal annealing processing10.1016/j.tsf.2017.03.008 ↗
40. The vibrational properties study of kesterite Cu2ZnSnS 4 single crystals by using polarization dependent Raman spectroscopy10.1016/j.optmat.2012.09.031 ↗
41. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
42. A study of ternary Cu2SnS3 and Cu3SnS 4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
43. Cu2ZnSnS4 thin film solar cell utilizing rapid thermal process of precursors sputtered from a quaternary target: a promising application in industrial processes10.1039/C4RA07748B ↗
44. CZTS solar cell with non-toxic buffer layer: a study on the sulphurization temperature and absorber layer thickness10.1016/j.solener.2020.06.103 ↗
45. Synthesis and study of structure and phase composition in Cu2–xS, SnxSy, ZnS, CuxSnSy and CuZnSnS pellets10.1007/s10854-020-03045-y ↗
46. Raman scattering and disorder effect in Cu2ZnSnS410.1002/pssr.201307073 ↗
47. Control of secondary phases and disorder degree in Cu2ZnSnS4 films by sulfurization at varied subatmospheric pressures10.1016/j.solmat.2019.109915 ↗
48. Compositional optimization of photovoltaic grade Cu2ZnSnS 4 films grown by pneumatic spray pyrolysis10.1016/j.tsf.2012.12.082 ↗
49. Time evolution to CdCl2 treatment on Cd-based solar cell devices fabricated by vapor evaporation10.1016/j.solener.2017.05.013 ↗
50. Bandgap of thin film solar cell absorbers: a comparison of various determination methods10.1016/j.tsf.2018.11.017 ↗
51. Photoluminescence investigation of Cu2ZnSnS4thin film solar cells10.1016/j.tsf.2014.10.079 ↗
52. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
53. Sentaurus modelling of 6.9% Cu2ZnSnS4 device based on comprehensive electrical & optical characterization10.1016/j.solmat.2016.10.053 ↗
54. Improving the conversion efficiency of Cu2ZnSnS4solar cell by low pressure sulfurization
55. Cu2ZnSnS4 thin film deposited by sputtering with Cu2ZnSnS4 compound target10.7567/JJAP.53.02BC10 ↗
56. Fabrication of Cu2ZnSnS4 films by sulfurization of Cu/ZnSn/Cu precursor layers in sulfur atmosphere for solar cells10.1016/j.solmat.2011.07.017 ↗
57. Fabrication of Cu2ZnSnS4 solar cell on a flexible glass substrate10.1016/j.tsf.2014.03.054 ↗
58. Microphotoluminescence study of Cu2ZnSnS4 polycrystals10.1117/1.JPE.3.030599 ↗
59. Phase transition in Cu2+: XSnS3+ y (0 ≤ x ≤ 2; 0 ≤ y ≤ 1) ternary systems synthesized from complexes of coumarin derived thiocarbamate motifs: optical and morphological properties10.1039/C9RA07376K ↗
60. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
61. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
62. Vibrational properties of stannite and kesterite type compounds: Raman scattering analysis of Cu 2(Fe,Zn)SnS 410.1016/j.jallcom.2012.06.042 ↗
63. P. Liu, P. Longo, A. Zaslavsky, D. Pacifici, Optical bandgap of single- and multi-layered amorphous germanium ultra-thin films, J. Appl. Phys. 119 (2016) 014304, doi:10.1063/1.4939296.10.1063/1.4939296 ↗