journal article·2023-10

Enhancement of power conversion efficiency of Ag-substituted Cu2ZnSn(S,Se)4 solar cells via tuning Cu2+/(Cu++Cu2+) percentage in precursor solution

Jiayong Zhang, Bin Yao, Zhanhui Ding, Yongfeng Li, Ding Ma, Mengge Li, Yuting Sun, Chunkai Wang, Yue Liu, Xiaofei Sun

Publisher page

Abstract

Although trace silver (Ag) substitution for Cu in Cu 2ZnSn(S, Se) 4 (CZTSSe) offers benefits in improving open-circuit voltage (V OC ) of CZTSSe solar cells, its further development is still hindered by the fairly low short-circuit current density (J SC) owing to the increase of bandgap (E g ) of the absorber layer. Herein, a strategy is demonstrated to mitigate the poor J SC arising from the Ag substitution by tuning the Cu 2+/(Cu ++Cu 2+) percentage in the (Cu, Ag) 2ZnSnS 4 (CAZTS) precursor solution. Depth characterization indicates that the appropriate Cu 2+/(Cu ++Cu 2+ ) percentage in the CAZTS precursor solution increases the photogenerated charges separation and carrier transport processes for Ag-substituted CZTSSe (CAZTSSe) solar cells. Benefiting from this strategy, the power conversion efficiency (PCE) of 9.57% is achieved when the Cu 2+/(Cu ++Cu 2+) is 50 at.%. The main factor for the improvement of PCE is due to the increase in photogenerated current density (J L ) and decrease in shunt resistance (R sh). It is demonstrated that the increase in J L results from a widening in the depletion layer width (W d) of the p-n junction and an increase in carrier lifetime, induced by optimization of the Cu 2+/(Cu ++Cu 2+) percentage. While the decrease in R sh comes from the change of reaction pathways due to the change in Cu 2+/(Cu ++Cu 2+) percentage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. 11.4% efficiency kesterite solar cells on transparent electrode
2. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
3. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
4. Gradient conduction band energy engineering driven high‐efficiency solution‐processed Cu2ZnSn(S,Se)4/ZnxCd1–xS solar cells
5. Toward high efficient Cu2ZnSn(Sx, Se1-x)4 solar cells: break the limitations of VOC and FF
6. Solar cell efficiency tables (version 62)
7. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
8. Ge bidirectional diffusion to simultaneously engineer back interface and bulk defects in the absorber for efficient CZTSSe solar cells
9. Son · 2023 · e336
10. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag- based kesterite compounds10.1002/adfm.201502272 ↗
11. Unveiling the selenization reaction mechanisms in ambient air‐processed highly efficient kesterite solar cells10.1002/aenm.202300521 ↗
12. Elemental precursor solution processed (Cu1-xAgx)2ZnSn(S,Se)4 photovoltaic devices with over 10% efficiency10.1021/acsami.7b03944 ↗
13. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
14. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% shockley-queisser limit10.1002/adfm.202101927 ↗
15. Enhancing open-circuit voltage of solution-processed Cu2ZnSn(S,Se)4 solar cells with ag substitution10.1109/JPHOTOV.2017.2675993 ↗
16. Structure, optical and electrical properties of (Cu1-xAgx)2ZnSn(S,Se)4 alloy thin films for photovoltaic application10.1016/j.mssp.2018.03.014 ↗
17. Insights into the efficiency improvement for CZTSSe solar cells with over 12% efficiency via Ga incorporation
18. Charge separation enhancement enables record photocurrent density in Cu2ZnSn(S,Se)4 photocathodes for efficient solar hydrogen production
19. Improving the charge separation and collection at the buffer/absorber interface by double-layered Mn-substituted CZTS10.1016/j.solmat.2018.05.052 ↗
20. Influence mechanism of Cu+/(Cu++Cu2+) ratio in Cu-Zn-Sn-S precursor solution on performance of Cu2ZnSn(S,Se)4 solar cells10.1016/j.solener.2021.12.021 ↗
21. Efficiency enhancement of Cu2ZnSn(S, Se)4 solar cells by addition a CuSe intermediate layer between Cu2ZnSn(S, Se)4 and Mo electrode10.1016/j.jallcom.2022.165056 ↗
22. Performance degradation in solution-processed Cu2ZnSn(S, Se)4 solar cells based on different oxidation states of copper salts10.1021/acsaem.2c02243 ↗
23. Lithium-assisted synergistic engineering of charge transport both in GBs and GI for Ag-substituted Cu2ZnSn(S,Se)4 solar cells10.1016/j.jechem.2020.03.007 ↗
24. Daniel · 2011
25. KCN chemical etch for interface engineering in Cu2ZnSnSe4 Solar Cells10.1021/acsami.5b02122 ↗
26. Optimization of CdS buffer layer for high-performance Cu2ZnSnSe4 solar cells and the effects of light soaking: elimination of crossover and red kink10.1002/pip.2589 ↗
27. Cu2ZnSn(SxSe1−x)4 thin film solar cell with high sulfur content (x approximately 0.4) and low voc deficit prepared using a postsulfurization process10.1016/j.solmat.2017.09.036 ↗
28. Temperature dependent electrical characterization of thin film Cu2ZnSnSe4 solar cells10.1088/0022-3727/49/8/085101 ↗
29. Abou-Ras · 2016