journal article·2023-08

Thermal laser separation and high-throughput layer deposition for edge passivation for TOPCon shingle solar cells

Elmar Lohmüller, Puzant Baliozian, Leon Gutmann, Leander Kniffki, Vivek Beladiya, Jürgen Geng, Lili Wang, Ricky Dunbar, Arnaud Lepert, Marc Hofmann, Armin Richter, Jonas D. Huyeng

Publisher page

Abstract

This work demonstrates the reduction of cutting-induced losses on tunnel-oxide passivated contact (TOPCon) shingle solar cells via edge passivation using high-throughput layer deposition. TOPCon shingle solar cells with a size of 26.46 mm × 158.75 mm are separated from industrial full-square TOPCon host cells either by laser scribing and mechanical cleaving (LSMC) from the emitter-free rear side or by thermal laser separation (TLS) from the front side. TLS yields up to 0.2% abs more efficient shingle cells directly after singulation in comparison to shingle cells that have been separated by LSMC. Passivated edge technology (PET) is applied by depositing aluminum oxide (Al 2O 3 ) layers using two different tools: thermal atomic layer deposition (T-ALD) in a lab-scale tool with a throughput of tens of shingle cells per hour and a high-throughput plasma-enhanced ALD (PE-ALD) prototype tool with a throughput of about 60,000 shingle cells per hour. The energy conversion efficiency of the edge-passivated shingle cells after T-ALD Al 2O 3 PET is found to be 0.4% abs higher than directly after separation. This gain is the same regardless of whether LSMC or TLS is used for cell separation. For PE-ALD Al 2O 3 and TLS, a gain of 0.5% abs is measured after PET. Stringing tests with electrically conductive adhesive so far indicate that Al 2O 3 layers do not negatively affect the resistance of cell to cell interconnections. Thus, low-damage cell cutting in combination with high-throughput Al 2O 3 layer deposition for edge passivation is a very promising approach to maintain high efficiency for industrial TOPCon solar cells in shingled modules.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Solar module with half size solar cells
2. Investigation of the short-circuit current increase for PV modules using halved silicon wafer solar cells10.1016/j.solmat.2014.11.012 ↗
3. Exceeding 23 % and mass production of p-Cz Q.ANTUM bifacial solar cells
4. The international technology roadmap for photovoltaics and the significance of its decade-long projections
5. 2022
6. Photovoltaic semiconductor apparatus or the like
7. High-efficiency silicon solar cells for low-illumination applications
8. Shingling technology for cell interconnection: technological aspects and process integration
9. Bifacial p-type silicon shingle solar cells - the “pSPEER” concept
10. Postmetallization "passivated edge technology" for separated silicon solar cells10.1109/JPHOTOV.2019.2959946 ↗
11. Shingled solar module for BIPV application
12. Magazine · 2023
13. Analysis of edge losses on silicon heterojunction half solar cells10.1016/j.solmat.2019.110213 ↗
14. Challenges for efficient integration of SHJ based solar cells in shingle module configuration
15. Insights on cell edge defects impact and post-process repassivation for heterojunction
16. Low temperature post-process repassivation for heterojunction cut-cells
17. Application of SHJ and TOPCon shingle cells in full-format and integrated solar modules
18. TOPCon shingle solar cells: thermal laser separation and passivated edge technology10.1002/pip.3680 ↗
19. Loss analysis for laser separated solar cells10.1016/j.egypro.2014.08.094 ↗
20. Modelling of edge recombination losses in half-cells
21. Modeling edge recombination in silicon solar cells10.1109/JPHOTOV.2017.2787020 ↗
22. Analysis of edge recombination for high-efficiency solar cells at low illumination densities
23. The SPEER solar cell - simulation study of shingled bifacial PERC-technology-based stripe cells
24. TLS-dicing – the way to higher yield and throughput
25. Study of fast laser induced cutting of silicon materials
26. Evaluation of heterojunction solar cell losses due to half-cell processes
27. High quality half-cell processing using thermal laser separation10.1016/j.egypro.2015.07.048 ↗
28. Thermal laser separation of PERC and SHJ solar cells10.1109/JPHOTOV.2020.3041251 ↗
29. Determination of effect of laser cutting method on the performance of bifacial PERC cells
30. Post-separation processing for silicon heterojunction half solar cells with passivated edges10.1109/JPHOTOV.2021.3099732 ↗
31. Alternative CZ ingot squaring and half-cell cutting methodology for low-temperature PV cell and module technologies
32. Simplified cell cutting, efficient edge passivation, copper metallization: tackling the last hurdles for optimized SHJ integration in shingle module configuration
33. Peripheral loss reduction of high efficiency silicon solar cells by MOS gate passivation, by poly-Si filled grooves and by cell pattern design10.1002/(SICI)1099-159X(200003/04)8:2<201::AID-PIP288>3.0.CO;2-V ↗
34. Edge passivation for small-area, high efficiency solar cells
35. PERC-based shingled solar cells and modules at Fraunhofer ISE
36. Excellent silicon surface passivation with 5 Å thin ALD Al2O3 layers: influence of different thermal post-deposition treatments10.1002/pssr.201105188 ↗
37. Annealing of silicon heterojunction solar cells: interplay of solar cell and indium tin oxide properties10.1109/JPHOTOV.2019.2924389 ↗
38. Transport losses at the TCO/a-Si:H/c-Si heterojunction: influence of different layers and annealing10.1109/JPHOTOV.2020.2983989 ↗
39. Addressing separation and edge passivation challenges for high efficiency shingle heterojunction solar cells10.1016/j.solmat.2022.112095 ↗
40. Measuring and mitigating edge recombination in modules employing cut cells
41. Compensating cutting losses by passivation solution for industry upgradation of TOPCon and SHJ solar cells
42. Stable passivation of cut edges in encapsulated n-type silicon solar cells using Nafion polymer
43. Evaluation of silicon solar cell separation techniques for advanced module concepts
44. Bifacial shingle solar cells on p-type Cz-Si (pSPEER)
45. 3D-Micromac
46. GridTOUCH: innovative solution for accurate IV measurement of busbarless cells in production and laboratory environments
47. M. Hofmann, P. Baliozian, J. Geng, V. Beladiya, L. Gutmann, L. Kniffki, E. Lohmüller, J.D. Huyeng, Low-temperature high-throughput plasma-enhanced atomic layer deposition of aluminum oxide for c-Si solar cell edge passivation (to be published).