Electro-optical characterization of arsenic-doped CdSeTe and CdTe solar cell absorbers doped in-situ during close space sublimation
Source abstract
Abstract
Most contemporary device models predict that an acceptor concentration of at least 10 16 cm −3 is required to reach an open circuit voltage of 1 V in polycrystalline CdTe-based solar cells. While copper has traditionally been used as the de facto p-type dopant in polycrystalline cadmium telluride (CdTe) and cadmium selenide telluride (CdSeTe), reaching high acceptor concentrations has proved to be challenging in such devices due to significant dopant compensation. The acceptor concentration in copper-doped CdTe and CdSeTe typically ranges from 10 13 to 10 15 cm −3 and routinely exhibit low external radiative efficiencies below 0.01%, limiting their implied voltage (i.e., quasi-Fermi level splitting) to approximately 900 mV. As an alternative to copper, this work explores the use of arsenic as a p-type dopant for CdTe and CdSeTe. Using a novel technique in which a thin layer of arsenic-containing material is deposited and used as a reservoir for arsenic to diffuse into a front layer of previously undoped material, this contribution demonstrates that high external radiative efficiencies are achievable, a direct result of combined high acceptor concentrations and long minority-carrier lifetimes in the absorber. This leads to improved implied voltages, and indicates that As-doping represents a promising pathway towards improving the external voltage of CdSeTe/CdTe solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Fraunhofer Institute · 2021
2. Mitchell · 2016 · vol. 829 · 29
3. Luque · 2003
4. Passivation mechanism in CdTe solar cells: the hybrid role of Se10.1063/5.0058290 ↗
5. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
6. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
7. Solar cell efficiency tables (Version 58)10.1002/pip.3444 ↗
8. Structural phase change and optical band gap bowing in hot wall deposited CdSexTe1-x thin films10.1016/j.solener.2008.10.004 ↗
9. Efficiency limits for single-junction and tandem solar cells10.1016/j.solmat.2006.06.002 ↗
10. Geisthardt · Status and Potential of CdTe Solar-Cell Efficiency · 2015 · 5 · 1217
11. Temperature difference in close-spaced sublimation (CSS) growth of CdTe thin film on ultra-thin glass substrate10.1016/j.rinp.2020.103213 ↗
12. Cross-Sectional mapping of hole concentrations as a function of copper treatment in CdTe photo-voltaic10.1002/pip.2576 ↗
13. Native defects in CdTe10.1103/PhysRevB.60.8943 ↗
14. First-principles study of doping limits of CdTe10.1002/1521-3951(200201)229:1<305::AID-PSSB305>3.0.CO;2-3 ↗
15. Copper impurity behaviour in CdTe films10.1002/pssa.2210590112 ↗
16. Comparative study of as and Cu doping stability in CdSeTe absorbers10.1016/j.solmat.2021.111012 ↗
17. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
18. Interface engineering for 25% CdTe solar cells
19. Back-surface recombination, electron reflectors, and paths to 28% efficiency for thin-film photovoltaics: a CdTe case study10.1063/1.5063799 ↗
20. Overcoming carrier concentration limits in polycrystalline CdTe thin films with in situ doping10.1038/s41598-018-32746-y ↗
21. In Situ Arsenic Doping of CdTe-Si by molecular beam epitaxy10.1007/s11664-015-3913-3 ↗
22. Arsenic doped Cd-rich CdTe: equilibrium doping limit and long lifetime for high open-circuit voltage solar cells greater than 900 mV
23. CdTe solar cells with open-circuit voltage breaking the 1V barrier
24. Low-temperature and effective ex situ group V doping for efficient polycrystalline CdSeTe solar cells10.1038/s41560-021-00848-z ↗
25. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
26. CdTe photovoltaics for sustainable electricity generation10.1007/s11664-016-4484-7 ↗
27. Advanced Co-sublimation of low bandgap CdSex Te1-x alloy to achieve higher short-circuit current10.1109/PVSC.2018.8548272 ↗
28. CdTe synthesis and crystal growth using the high-pressure Bridgman technique10.1016/j.jcrysgro.2019.125466 ↗
29. Effect of CdCl2 passivation treatment on microstructure and performance of CdSeTe/CdTe thin-film photovoltaic devices10.1016/j.solmat.2018.06.016 ↗
30. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
31. Radiative recombination dominated n-type monocrystalline CdTe/MgCdTe double-heterostructures
32. Understanding what limits the voltage of polycrystalline CdSeTe solar cells10.1038/s41560-022-00985-z ↗
33. Understanding arsenic incorporation in CdTe with atom probe tomography10.1016/j.solmat.2018.02.023 ↗
34. Incorporation and activation of arsenic dopant in single-crystal cdte grown on si by molecular beam epitaxy10.1007/s11664-014-3173-7 ↗
35. Beyond thermodynamic defect models: a kinetic simulation of arsenic activation in CdTe
36. Self-compensation in arsenic doping of CdTe10.1038/s41598-017-04719-0 ↗
37. Carrier providers or killers: the case of Cu defects in CdTe10.1063/1.4986077 ↗
38. Diverse simulations of time-resolved photoluminescence in thin-film solar cells: a SnO2/CdSeyTe1-ycase study10.1063/5.0063028 ↗
39. Sputter-deposited oxides for interface passivation of CdTe photovoltaics10.1109/JPHOTOV.2017.2787021 ↗
40. Mechanisms for long carrier lifetime in Cd(Se)Te double heterostructures10.1063/5.0047976 ↗
41. Front and back interface recombination of MZO/CdTe/Te solar cells10.1109/PVSC.2018.8547489 ↗
42. CdSeTe/CdTe devices with reduced interface recombination through novel back contacts and group-V doping
43. Intrinsic surface passivation of CdTe10.1063/1.4933186 ↗
44. Voltage loss comparison in CdSe/CdTe solar cells and polycrystalline CdSeTe heterostructures10.1109/JPHOTOV.2021.3117914 ↗
45. Passivation, conductivity, and selectivity in solar cell contacts: concepts and simulations based on a unified partial-resistances framework10.1063/1.5117201 ↗
46. Calculation of the thermodynamic voltage limit of CdSeTe solar cells
47. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
48. Analysis for efficiency potential of high-efficiency and next-generation solar cells10.1002/pip.2955 ↗
49. Radiative efficiency of state-of-the-art photovoltaic cells
50. Pushing to the limit: radiative efficiencies of recent mainstream and emerging solar cells10.1021/acsenergylett.9b01128 ↗
51. Grover · 2018 · 1193
52. Impact of dopant-induced optoelectronic tails on open-circuit voltage in arsenic-doped Cd(Se)Te solar cells10.1063/5.0018955 ↗
53. The chemical potential of radiation10.1088/0022-3719/15/18/012 ↗
54. Guide for the perplexed to the Shockley–Queisser model for solar cells10.1038/s41566-019-0479-2 ↗
55. Efficiency potential of photovoltaic materials and devices unveiled by detailed-balance analysis10.1103/PhysRevApplied.7.044016 ↗