Environmentally sustainable electroplating of selective cobalt-chromium coating on stainless steel for efficient solar collectors
Source abstract
Abstract
Half of today's global energy consumption is in the form of heating and cooling. Solar collectors are the most promising sustainable alternative to fossil fuels in this sector. The most important component in a solar collector is the receiver, which by use of a selective surface absorbs and converts solar irradiance to thermal energy. Herein, a novel selective surface for low-to mid-temperature solar collectors is developed, studied and presented. The surface is produced by electroplating a cobalt-chromium coating on a stainless steel substrate using an electrolyte based on a deep eutectic solvent. Our method makes use of trivalent instead of traditionally used hexavalent chromium, which significantly reduces health-related issues and makes it more environmentally benign. We obtain a coating of chromium doped cobalt where the surface exhibits an absorptance and emittance of 0.96 and 0.14, respectively, giving it a solar-to-thermal efficiency of 0.95. An observed loss in optical efficiency, is shown to correlate to an oxidation of the metallic cobalt to Co3O4 at elevated temperatures. We further show that this oxidation can be mitigated by dip-coating a protective silica top coating, which concurrently improves the optical selectivity of the surface. The present selective surface is efficient, cheap, scalable, and easy to produce sustainably, making it competitive to industry standards. We foresee that our method will have impact on the advancement of improved low-to mid-temperature solar collectors, assisting a faster transition towards a sustainable society.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Transition Metal Oxide Nanomaterials · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Historical development of concentrating solar power technologies to generate clean electricity efficiently – a review10.1016/j.rser.2014.09.008 ↗
2. Selective radiation. I. Wavelength discrimination. II. Wavefront discrimination
3. Wavelength-dependent (selective) processes for utilization of solar energy10.1016/0038-092X(58)90050-1 ↗
4. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
5. Solchrome solar selective coatings - an effective way for solar water heaters globally10.1016/S0960-1481(99)00028-2 ↗
6. Materials for photothermal solar energy conversion10.1007/BF00700767 ↗
7. Microstructure and corrosion behavior of Cr and Cr–P alloy coatings electrodeposited from a Cr(III) deep eutectic solvent10.1039/C5RA13056E ↗
8. Optimization of AlxOy/Pt/AlxOy multilayer spectrally selective coatings for solar–thermal applications10.1016/j.vacuum.2012.06.012 ↗
9. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
10. A Tantalum diffusion barrier layer to improve the thermal stability of AlxOy/Pt/AlxOy multilayer solar absorber10.1016/j.solener.2014.05.029 ↗
11. Thermal stability of electron beam evaporated AlxOy/Pt/AlxOy multilayer solar absorber coatings10.1016/j.solmat.2013.09.027 ↗
12. Coatings for concentrating solar systems – a review10.1016/j.rser.2015.01.015 ↗
13. Development of black cobalt selective absorber on copper for solar collectors
14. A new cobalt oxide electrodeposit bath for solar absorbers10.1016/S0927-0248(97)00209-2 ↗
15. Comparison of different forms of black cobalt selective solar absorber surfaces10.1016/0165-1633(87)90013-X ↗
16. Design of chemical composition and optimum working conditions for trivalent black chromium electroplating bath used for solar thermal collectors10.1016/j.renene.2005.02.003 ↗
17. Electrodeposition of black chromium from environmentally electrolyte based on trivalent chromium salt10.1016/j.surfcoat.2009.05.022 ↗
18. Electrodeposition of black chromium–cobalt alloy based on trivalent sulfate electrolyte10.1016/j.jtice.2015.08.002 ↗
19. The use of trivalent chromium bath to obtain a solar selective black chromium coating10.1016/j.apsusc.2014.03.122 ↗
20. Chromium electrodeposition from [BMIm][BF4] ionic liquid10.1007/s10800-010-0218-3 ↗
21. Electrodeposition of black chromium spectrally selective coatings from a Cr(III)–ionic liquid solution10.1016/j.tsf.2010.10.029 ↗
22. Novel solvent properties of choline chloride/urea mixtures10.1039/b210714g ↗
23. Potential applications of deep eutectic solvents in nanotechnology10.1016/j.cej.2015.03.091 ↗
24. Deep eutectic solvents (DESs) and their applications10.1021/cr300162p ↗
25. Structure, composition and corrosion resistance studies of Co–Cr alloy electrodeposited from deep eutectic solvent (DES), J. Alloy10.1016/j.jallcom.2012.01.140 ↗
26. The electrodeposition of amorphous/nanocrystalline Ni–Cr alloys from ChCl–EG deep eutectic solvent10.1149/1945-7111/ab7cc3 ↗
27. Trivalent chromium electrodeposition using a deep eutectic solvent, Anti-Corros
28. Electrochemical studies of metallic chromium electrodeposition from a Cr(III) bath10.1016/j.jelechem.2013.08.005 ↗
29. Speciation, physical and electrolytic properties of eutectic mixtures based on CrCl(3).6H(2)O and urea10.1039/c4cp00057a ↗
30. Cobalt electrodeposition using urea and choline chloride10.1016/j.electacta.2014.01.052 ↗
31. Fundamental principles of concentrating solar power (CSP) systems
32. Electrodeposition of zinc-cobalt alloys from choline chloride–urea ionic liquid10.1016/j.electacta.2013.10.204 ↗
33. Electropolishing of 304 stainless steel: surface roughness control using experimental design strategies and a summarized electropolishing model10.1016/j.electacta.2007.11.075 ↗
34. Carlsson
35. Standard test methods for measuring adhesion be tape test 1
36. Standard tables for reference solar spectral irradiances: direct normal and hemispherical on 39° tilted surface
37. Structured graphene metamaterial selective absorbers for high efficiency and omnidirectional solar thermal energy conversion10.1038/s41467-020-15116-z ↗
38. Surface chemical analysis - X-ray photoelectron spectrometers - calibration of energy scales
39. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
40. Micro- and nanostructured surfaces for selective solar absorption10.1002/adom.201500063 ↗
41. Density, viscosity, and conductivity of choline chloride + ethylene glycol as a deep eutectic solvent and its binary mixtures with dimethyl sulfoxide10.1016/j.molliq.2016.10.115 ↗
42. Influence of some electrodeposition parameters on formation of nanostructure black cobalt coating used for solar energy absorption
43. Pedrotti · 2014
44. Mechanism and kinetics of chromium electrochemical nucleation and growth from a choline chloride/ethylene glycol deep eutectic solvent10.1149/2.0851809jes ↗
45. Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 41010.1016/j.tsf.2010.12.020 ↗
46. Chromium interlayer amorphous carbon film for 304 stainless steel bipolar plate of proton exchange membrane fuel cell10.1016/j.surfcoat.2016.07.069 ↗
47. In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading10.1016/j.tsf.2008.09.104 ↗
48. The oxidation of cobalt in air from room temperature to 467C10.1007/BF00611349 ↗
49. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
50. Synthesis and characterization of cobalt hydroxide, cobalt oxyhydroxide, and cobalt oxide nanodiscs
51. Cobalt nanoparticles for biomedical applications: facile synthesis, physiochemical characterization, cytotoxicity behavior and biocompatibility10.1016/j.apsusc.2017.03.002 ↗
52. Synthesis and characterization of cobalt nanoparticles using hydrazine and citric acid10.1155/2014/525193 ↗
53. Bergström · 2013
54. How can the nanocrystallinity of 7 nm spherical Co nanoparticles dispersed in solution be improved?10.1021/la1049887 ↗
55. Femtosecond laser surface structuring and oxidation of chromium thin coatings: black chromium10.1016/j.apsusc.2014.09.168 ↗
56. Control of thermal emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
57. Electroplated Co3O4 selective coatings for high-temperature solar thermal applications10.1007/s12034-020-02112-8 ↗
58. The Raman spectra of Co3O410.1088/0022-3719/21/7/007 ↗
59. Single crystalline Co3O4 nanocrystals exposed with different crystal planes for Li-O2 batteries10.1038/srep05767 ↗
60. Thermal decomposition of basic cobalt and copper carbonates - thermal stability of the produced oxides as influenced by gamma-irradiation10.1007/BF01980784 ↗
61. Development of W–SiO2 and Nb–TiO2 solar absorber coatings for combined heat and power systems at intermediate operation temperatures10.1016/j.solmat.2014.10.022 ↗
62. Antireflection treatment of Thickness Sensitive Spectrally Selective (TSSS) paints for thermal solar absorbers10.1016/j.solener.2009.10.016 ↗
63. Interspecimen comparison of the refractive index of fused silica10.1364/JOSA.55.001205 ↗
64. Investigation of porous oxides as an antireflective coating for glass surfaces10.1364/AO.19.001425 ↗
65. Formation and performance of highly absorbing solar thermal coating based on carbon nanotubes and boehmite10.1016/j.enconman.2016.04.081 ↗
66. Selective absorption of carbon nanotube thin films for solar energy applications10.1016/j.solmat.2015.07.044 ↗
67. Accelerated ageing tests of carbon nanotube spectrally selective solar absorbers10.1016/j.solmat.2016.07.017 ↗