journal article·2022-05

Root cause analysis of solar cell cracks at shingle joints

Nils Klasen, Friedemann Heinz, Angela De Rose, Torsten Roessler, Achim Kraft, Marc Kamlah

Publisher page

Abstract

In this work, we report a cracking mechanism occurring on shingle solar cells in PV modules subjected to thermal cycling. Experimental investigations of six different ECAs show that the positions of cracks are precisely limited to the applied ECA in the joint and the occurrence confined to the rear side of the solar cells. Structural mechanic simulations based on the Finite Element Method (FEM) obtain maximum stresses of up to 400 MPa on the rear surface of the solar cell orientated towards the back sheet. On the opposing surface, orientated towards the glass, the stresses are on a far lower level at around 230 MPa . We measured the characteristic fracture stresses and found values of 96 MPa on the rear and 265 MPa on the front side of the separated shingle solar cells. The lower values on the rear originate from microfractures at the solar cell edges caused by the laser scribe and mechanical cleave process. We discuss two mechanisms taking place at the shingle joint during cooling from lamination temperature at 160 ° C to − 40 ° C . First a relative shift of the solar cells caused by a mismatch in the thermal expansion in y-direction. Second a mismatch in thermal expansion in z-direction. We apply an anisotropic thermal expansion behavior in our simulations to separate both mechanisms and reveal the driving mechanism behind crack formation. We find that the cracks are caused by thermal contraction of the encapsulant in z-direction. Transversal contraction of the encapsulant causes additional strain in z-direction.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Wirth · 2020
2. Eitner · 2011
3. 2017
4. Bifacial p-type silicon shingle solar cells - the pSPEER concept
5. Klasen · 2017
6. Accelerated TC test in comparison with standard TC test for PV modules with ribbon, wire and shingle interconnection
7. Heinzelmann · 1995
8. Weibull · 1939
9. Weibull statistics for multiple flaw distributions and its application in silicon fracture prediction
10. Statistical fracture modelling of silicon with varying thickness10.1016/j.actamat.2006.04.032 ↗
11. Schmid · 2010
12. The effect of cell and module dimensions on thermomechanical stress in PV modules10.1109/JPHOTOV.2019.2949875 ↗
13. 2005
14. Mechanical damage of half-cell cutting technologies in solar cells and module laminates
15. Modeling and testing the mechanical strength of solar cells10.1016/j.solmat.2013.06.048 ↗
16. High quality half-cell processing using thermal laser separation10.1016/j.egypro.2015.07.048 ↗
17. 2016
18. Dietrich · 2014
19. 1991
20. What is the Young's modulus of silicon?10.1109/JMEMS.2009.2039697 ↗
21. Mechanical problems of novel back contact solar modules
22. Electronic effects in the elastic constants of n -type silicon10.1103/PhysRev.161.756 ↗
23. Linear thermal expansion measurements on silicon from 6 to 340 K10.1063/1.323747 ↗
24. Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 K10.1063/1.333965 ↗
25. 2004
26. FEM simulation of deformations in strings of shingled solar cells subjected to mechanical reliability testing10.1063/1.5125881 ↗
27. Thermo-mechanical assessment of solar cell displacement with respect to the viscoelastic behaviour of the encapsulant
28. Linear viscoelastic characterization of electrically conductive adhesives used as interconnect in photovoltaic modules
29. 1989
30. Ferry · 1980
31. Ward · 2013
32. Lakes · 1999
33. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
34. Mechanical modeling of electrically conductive adhesives for photovoltaic applications
35. Stommel · 2018
36. Zienkiewicz · 2013
37. 1999
38. S. Dietrich, M. Pander, M. Sander, U. Zeller, and M. Ebert, “Stress analysis of encapsulated solar cells by means of superposition of thermal and mechanical stresses,” in Proc. of SPIE, 882505-1-882505-10.10.1117/12.2024319 ↗