journal article·2022-08

Critical components in supercritical CO2 Brayton cycle power blocks for solar power systems: Degradation mechanisms and failure consequences

Salar Delkasar Maher, Madjid Sarvghad, Rene Olivares, Teng-Cheong Ong, Geoffrey Will, Theodore A. Steinberg

Publisher page

Abstract

This review presents an overview of the critical components in supercritical CO 2 Brayton cycle power block systems along with their degradation mechanisms and possible consequences in Concentrated Solar Power (CSP) systems. Requirements for high strength, efficiency, and environmental compatibility are also discussed. sCO 2 turbines are advantageous because of their small size and significantly reduced number of turbomachinery components. These components are exposed to a sCO 2 environment with high pressures, temperatures, and thermal cycling that can result in premature failure due to fatigue, creep, corrosion, stress corrosion cracking, erosion, and carburization. Nickel and stainless steel candidate alloys have been proposed for sCO 2 service and at these operational conditions their failures are discussed. The consequences of loss of containment for typical system designs are also explored with specific reference to potential exothermic reactions with other heat transfer media such as sodium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Heat transfer and supercritical fluids · Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Mehos · 2017
2. Supercritical carbon dioxide Brayton cycle for concentrated solar power10.1016/j.supflu.2013.01.010 ↗
3. Review of the solubility, monitoring, and purification of impurities in molten salts for energy storage in concentrated solar power plants10.1016/j.rser.2020.110006 ↗
4. Winter · 1991
5. Comparative analysis of concentrating solar power and photovoltaic technologies: technical and environmental evaluations10.1016/j.apenergy.2012.08.033 ↗
6. 2020
7. Introduction to concentrating solar power (CSP) technology
8. Future economic of concentrating solar power (CSP) for electricity generation in Egypt10.1016/j.rser.2014.08.067 ↗
9. The potential role of concentrating solar power within the context of DOE's 2030 solar cost targets
10. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
11. Solar power technologies for sustainable electricity generation–A review10.1016/j.rser.2015.10.135 ↗
12. Concentrated solar power (CSP)
13. 2019
14. 2020
15. Historical development of concentrating solar power technologies to generate clean electricity efficiently–A review10.1016/j.rser.2014.09.008 ↗
16. A comparative study between parabolic trough collector and linear Fresnel reflector technologies10.1016/j.egypro.2011.05.065 ↗
17. Study of corrosion by Dynamic Gravimetric Analysis (DGA) methodology. Influence of chloride content in solar salt10.1016/j.solmat.2016.07.027 ↗
18. Irena · 2012
19. History, current state, and future of linear Fresnel concentrating solar collectors10.1016/j.solener.2013.05.021 ↗
20. The fluidized bed air heat exchanger in a hybrid brayton-cycle solar power plant
21. Materials compatibility for the next generation of Concentrated Solar Power plants10.1016/j.ensm.2018.02.023 ↗
22. High temperature Mn2O3/Mn3O4 and Co3O4/CoO systems for thermo-chemical energy storage10.1016/j.jenvman.2020.110582 ↗
23. Supercritical CO2 Brayton cycle: a state-of-the-art review10.1016/j.energy.2019.115900 ↗
24. Kerskes · 2016 · 345
25. Chapter 6 - thermochemical energy storage
26. Thermal energy storage: recent developments and practical aspects10.1016/j.pecs.2015.10.003 ↗
27. Luca · 2017
28. Yu · 2021
29. High-efficiency concentrated solar power plants need appropriate materials for high-temperature heat capture, conveying and storage10.1016/j.energy.2017.07.129 ↗
30. Review of supercritical CO2 power cycles integrated with CSP10.1002/er.4909 ↗
31. Review of supercritical carbon dioxide (sCO2) technologies for high-grade waste heat to power conversion10.1007/s42452-020-2116-6 ↗
32. Review of supercritical CO2 technologies and systems for power generation10.1016/j.applthermaleng.2020.116447 ↗
33. Thermodynamic analysis of a Brayton cycle and Rankine cycle arranged in series exploiting the cold exergy of LNG (liquefied natural gas)10.1016/j.energy.2013.12.036 ↗
34. Alternative cycles based on carbon dioxide for central receiver solar power plants10.1016/j.applthermaleng.2010.11.008 ↗
35. High-efficiency thermodynamic power cycles for concentrated solar power systems10.1016/j.rser.2013.11.010 ↗
36. Energy and exergy analysis of a steam power plant in Jordan10.1016/j.applthermaleng.2008.02.029 ↗
37. Liu · 2019 · 198
38. Metal corrosion in a supercritical carbon dioxide - liquid sodium power cycle
39. A novel supercritical CO2 recompression Brayton power cycle for power tower concentrating solar plants
40. Orientation mapping
41. LCOE improvement using new molten salts for thermal energy storage in CSP plants10.1016/j.rser.2015.12.148 ↗
42. A particle/sCO2 heat exchanger testbed and reference cycle cost analysis
43. Thermodynamic study of advanced supercritical carbon dioxide power cycles for concentrating solar power systems
44. Corrosion and erosion behavior in supercritical CO2 power cycles
45. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
46. Liquid sodium versus Hitec as a heat transfer fluid in solar thermal central receiver systems10.1016/j.solener.2012.05.001 ↗
47. Development of new molten salts with LiNO3 and Ca(NO3)(2) for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
48. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
49. Assessment of liquid metal technology status and research paths for their use as efficient heat transfer fluids in solar central receiver systems10.1016/j.solener.2013.03.025 ↗
50. Bobkov · 2008
51. A review on the application of liquid metals as heat transfer fluid in Concentrated Solar Power technologies10.1016/j.ijhydene.2016.01.030 ↗
52. Thermodynamic evaluation of liquid metals as heat transfer fluids in concentrated solar power plants10.1016/j.applthermaleng.2013.07.010 ↗
53. Review of heat transfer fluids in tube-receivers used in concentrating solar thermal systems: properties and heat transfer coefficients10.1016/j.rser.2015.10.059 ↗
54. Liquid metal systems for gasification-based power generation
55. Spencer · 2000
56. Testing an external sodium receiver up to heat fluxes of 2.5 MW/m2: results and conclusions from the IEA-SSPS high flux experiment conducted at the central receiver system of the Plataforma Solar de Almeria (Spain)10.1016/0038-092X(88)90143-0 ↗
57. Fink · 1995
58. Utilization of the supercritical CO2 Brayton cycle with sodium-cooled fast reactors
59. Review of supercritical CO2 power cycles integrated with CSP10.1002/er.4909 ↗
60. Heat transfer characteristics of supercritical carbon dioxide in a horizontal tube
61. Comparison investigation on the heat transfer characteristics for supercritical CO2 fluid and conventional refrigerants
62. A new equation of state for carbon dioxide covering the fluid region from the triple‐point temperature to 1100 K at pressures up to 800 MPa10.1063/1.555991 ↗
63. 2 - physical properties
64. Fleming · 2014
65. Zhao
66. Supercritical CO2 power cycle developments and commercialization: why sCO2 can displace steam
67. Brun · 2017
68. Experimental and analytical procedure for the characterization of innovative working fluids for power plants applications10.1016/j.applthermaleng.2020.115513 ↗
69. Potential of supercritical carbon dioxide power cycles to reduce the levelised cost of electricity of contemporary concentrated solar power plants10.3390/app10155049 ↗
70. Analysis of the thermodynamic potential of supercritical carbon dioxide cycles: a systematic approach10.1115/1.4038125 ↗
71. Thermal stability analysis of perfluorohexane10.1016/j.egypro.2015.07.358 ↗
72. Concentrating solar power now–clean energy for sustainable development
73. Techno-economic assessment of a high-efficiency, low-cost solar-thermal power system with sodium receiver, phase-change material storage, and supercritical CO2 recompression Brayton cycle10.1016/j.solener.2020.01.004 ↗
74. Performance of S-CO2 Brayton cycle and organic rankine cycle (ORC) combined system considering the diurnal distribution of solar radiation10.1007/s11630-019-1114-8 ↗
75. A degradation mode of a carbon steel during thermal cycling under a simulated combustion environment10.1016/S0921-5093(01)01746-4 ↗
76. Study of steam, helium and supercritical CO2 turbine power generations in prototype fusion power reactor10.1016/j.pnucene.2007.11.078 ↗
77. Practical considerations in scaling supercritical carbon dioxide closed Brayton cycle power systems
78. Compact heat exchangers: a review and future applications for a new generation of high temperature solar receivers10.1016/j.rser.2011.07.066 ↗
79. Kakaç · 2002
80. Thermodynamic analysis of part-flow cycle supercritical CO2 gas turbines10.1115/1.4001052 ↗
81. Compact heat exchangers
82. Micro-channel pressurized-air solar receiver based on compact heat exchanger concept10.1016/j.solener.2013.02.004 ↗
83. Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids10.1016/j.rser.2014.09.024 ↗
84. Heat exchangers for the next generation of nuclear reactors
85. Tuckerman · 1984 · 141
86. Hesselgreaves · 2016 · 1
87. Safety ratio degradation due to channel misalignment in a PCHE
88. Structural assessment of intermediate printed circuit heat exchanger for sodium-cooled fast reactor with supercritical CO2 cycle10.1016/j.anucene.2014.06.022 ↗
89. Microstructure and tensile properties of diffusion bonded austenitic Fe-base alloys—before and after exposure to high temperature supercritical-CO210.3390/met10040480 ↗
90. Hesselgreaves · 2016
91. Corrosion behavior of different metallic materials in supercritical carbon dioxide at 550°C and 250 bars10.5006/1.3628683 ↗
92. Na-CO2 interactions experiment (SNAKE). FY 2012 update on facility assembly and sodium loading
93. Failure analysis of a gas turbine blade made of Inconel 738LC alloy10.1016/j.engfailanal.2004.10.002 ↗
94. An investigation of fatigue failures of turbine blades in a gas turbine engine by mechanical analysis10.1016/S1350-6307(01)00005-X ↗
95. An experimental investigation into the temperature profile of a compliant foil air bearing10.1080/05698190490501995 ↗
96. Lifetime deterioration of turbine components during start-ups
97. Elevated temperature material properties of stainless steel alloys10.1016/j.jcsr.2009.12.016 ↗
98. Characterization of austenitic stainless steels deformed at elevated temperature10.1007/s11661-017-4212-9 ↗
99. High temperature oxidation and corrosion of metals
100. Lai · 2007