Industrial metallization of fired passivating contacts for n-type tunnel oxide passivated contact (n-TOPCon) solar cells
Source abstract
Abstract
Poly-Si/SiOx passivating contacts enable the manufacturing of highly-efficient Si solar cells, but their fabrication commonly relies on an extra high-temperature process such as dopant diffusion or thermal annealing for achieving excellent passivation and contacting properties. This extra process is eliminated in the fired passivating contact (FPC) approach used for simplified fabrication of poly-Si/SiOx passivating contacts. Instead, FPCs rely on the thermal budget of the fast/short and high-temperature firing process used for metallization of solar cells to achieve similar final properties. Despite this, compatibility of FPCs with industrially viable metallization techniques has not been demonstrated yet, which is studied in this work for fire-through Ag screen-printing and Ni/Ag plating. With screen-printing, low recombination current density (J(0)) down to 4.9 fA/cm(2), low contact resistivity between the Ag contacts and the FPC (rho(c,m)) down to 7.2 m Omega.cm(2), and Ohmic transport through the FPC including the SiOx film were achieved using wet-chemically grown SiOx. Nevertheless, J(0) of metallized regions (J(0,m)) exceeded 1000 fA/cm(2). Reducing J(0,m) was attempted by mitigating the blistering observed in FPCs, but J(0,m) remained high. With Ni/Ag plating, excellent surface passivation with J(0) down to 2.7 fA/cm(2) and very low J(0,m) < 50 fA/cm(2) were achieved, but no Ohmic contacts could be obtained. Integration of screen-printed FPCs in large-area n-TOPCon solar cells was also demonstrated, yielding average efficiencies of 18.4%, limited mainly by the high J(0,) (m) and series resistance of the FPCs. The results presented reveal the challenges for the industrialization of FPCs and provide valuable insights for tackling these.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Fischer · 2021
2. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
3. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
4. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
5. Taking TopCON to top runner: jolywood president lin jianwei talks solar n-type cell innovation
6. 24.58% efficient commercial n-type silicon solar cells with hydrogenation
7. Solar energy materials and solar cells TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
8. Fırat · 2022 · 231 · 78
9. Large-area bifacial n-TOPCon solar cells with in situ phosphorus-doped LPCVD poly-Si passivating contacts10.1016/j.solmat.2021.111544 ↗
10. Towards industrial manufacturing of TOPCon
11. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
12. Implementation and understanding of p+ fired rear hole selective tunnel oxide passivating contacts enabling >22% conversion efficiency in p-type c-Si solar cells10.1016/j.solmat.2020.110809 ↗
13. PECVD based layers for improved high temperature industrial solar cell processes
14. Contributions to the contact resistivity in fired tunnel-oxide passivating contacts for crystalline silicon solar cells10.1109/JPHOTOV.2019.2939880 ↗
15. Atmospheric pressure chemical vapor deposition of in-situ doped amorphous silicon layers for passivating contacts
16. FIRED-ONLY passivating poly-si ON oxide contacts with DC-sputtered IN-situ phosphorous-doped silicon layers
17. Passivating and low-resistive poly-Si tunneling junction enabling high-efficiency monolithic perovskite/silicon tandem solar cells10.1063/1.5120552 ↗
18. Controlling diffusion in poly-Si tunneling junctions for monolithic perovskite/silicon tandem solar cells10.1109/JPHOTOV.2021.3101177 ↗
19. Silicon‐based passivating contacts: the TOPCon route
20. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
21. Simultaneous fabrication of n & p contacts for bifacial cells by a novel Co-plating process
22. Progress of plated metallization for industrial bifacial TOPCon silicon solar cells
23. Hydrogen diffusion through silicon/silicon dioxide interfaces
24. Understanding contact formation on n-PERT-RJ solar cells
25. The effect of low pressure on the structure of LPCVD polycrystalline silicon films10.1149/1.2100239 ↗
26. How much rear side polishing is required? A study on the impact of rear side polishing in PERC solar cells
27. Study on the cleaning process of n+-poly-Si wraparound removal of TOPCon solar cells10.1016/j.solener.2020.09.028 ↗
28. Rapid and accurate determination of series resistance and fill factor losses in industrial silicon solar cells
29. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
30. Formation and suppression of hydrogen blisters in tunnelling oxide passivating contact for crystalline silicon solar cells10.1038/s41598-020-66801-4 ↗
31. Raman scattering from hydrogenated microcrystalline and amorphous silicon10.1088/0022-3719/15/2/019 ↗
32. An industrial LPCVD process for in situ phosphorus-doped polysilicon10.1149/1.2086381 ↗
33. Polysilicon passivating contacts for silicon solar cells: interface passivation and carrier transport mechanism10.1021/acsaem.8b02149 ↗
34. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
35. Analysis of hydrogen distribution and migration in fired passivating contacts (FPC)10.1016/j.solmat.2019.110018 ↗
36. Mechanisms of charge carrier transport in polycrystalline silicon passivating contacts10.1016/j.solmat.2021.111359 ↗
37. Numerical simulation of carrier-selective electron contacts featuring tunnel oxides10.1109/JPHOTOV.2015.2455346 ↗
38. Origin of asymmetric broadening of Raman peak profiles in Si nanocrystals
39. Firing stability of n-type poly-Si on oxide junctions formed by quartz tube annealing
40. Changes in hydrogen concentration and defect state density at the poly-Si/SiOx/c-Si interface due to firing10.1016/j.solmat.2021.111297 ↗
41. Development of 2-sided polysilicon passivating contacts for co-plated bifacial n-PERT cells
42. Co-plated bifacial n-PERT cells with 2-sided polysilicon passivating contacts