journal article·2020-12Open access

Comparison of passivation properties of plasma-assisted ALD and APCVD deposited Al2O3 with SiNx capping

Keeya Madani, Ajeet Rohatgi, Kwan Hong Min, Hee-eun Song, Ying-Yuan Huang, Ajay D. Upadhyaya, Vijaykumar Upadhyaya, Brian Rounsaville, Young-Woo Ok

Abstract

Abstract In this paper, we report on the direct comparison of Al2O3 films deposited by plasma-assisted atomic layer deposition (ALD) and atmospheric pressure chemical vapor deposition (APCVD) techniques on the passivation properties of both bare and boron diffused Si surfaces. It is found that ALD and APCVD deposited Al2O3 layers with SiNx capping have very similar chemical composition, hydrogen concentration at the Al2O3/Si interface, and interface defect density (Dit), but the ALD film has slightly higher negative fixed charge (Qf) after a high temperature (~750 °C) contact firing cycle typically used for solar cell fabrication. Both films showed excellent surface recombination velocities of 23% high-performance solar cells design, with very low bulk and rear contact recombination, the observed small difference in J0e has negligible effect on cell efficiency. Thus, APCVD Al2O3 passivation of B emitter can produce comparable efficiencies to their counterpart ALD Al2O3 passivated n-type Si solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The emergence of n-type silicon for solar cell manufacture
2. Advancements in n-type base crystalline silicon solar cells and their emergence in the photovoltaic industry
3. Passivation and depassivation of silicon dangling bonds at the Si/SiO2 interface by atomic hydrogen10.1063/1.110758 ↗
4. Field-effect passivation of the SiO2Si interface10.1063/1.370784 ↗
5. Silicon surface passivation by ultrathin Al2O3 films synthesized by thermal and plasma atomic layer deposition10.1002/pssr.200903334 ↗
6. Electrical and chemical studies on Al2O3 passivation activation process10.1016/j.egypro.2014.12.347 ↗
7. Properties of the c-Si/Al2O3 interface of ultrathin atomic layer deposited Al2O3 layers capped by SiNx for c-Si surface passivation10.1063/1.4903483 ↗
8. Thermal stability of the Al2O3 passivation on p-type silicon surfaces for solar cell applications10.1002/pssr.200903209 ↗
9. Firing stability of atomic layer deposited Al2O3 for c-Si surface passivation
10. Firing stable Al2O3/SiNx layer stack passivation for the front side boron emitter of n-type silicon solar cells
11. High-rate atomic layer deposition of Al2O3 for the surface passivation of Si solar cells10.1016/j.egypro.2011.06.140 ↗
12. J. Schmidt, F. Werner, B. Veith, D. Zielke, R. Bock, M.V. Tiba, P. Poodt, F. Roozeboom, A. Li, A. Cuevas, R. Brendel, Industrially relevant Al2O3 deposition techniques for the surface passivation of Si solar cells, in: Proceedings 25th European Photovoltaic Solar Energy Conference (EU PVSEC/WCPEC-5), Valencia, Spain, pp. 1130-1133.
13. (Invited) spatial ALD, deposition of Al2O3 films at throughputs exceeding 3000 wafers per hour10.1149/06103.0003ecst ↗
14. Surface passivation of crystalline silicon by APCVD aluminium oxide
15. Surface passivation of c-Si by atmospheric pressure chemical vapor deposition of Al2O310.1063/1.4718596 ↗
16. Thermal stability of silicon surface passivation by APCVD Al2O310.1016/j.solmat.2013.05.048 ↗
17. Effect of boron concentration on recombination at the p-Si–Al2O3 interface10.1063/1.4867643 ↗
18. Well passivating and highly temperature stable aluminum oxide deposited by atmospheric pressure chemical vapor deposition for PERC and PERT solar cell concepts
19. A quasi-steady-state open-circuit voltage method for solar cell characterization
20. Measurement of the emitter saturation current by a contactless photoconductivity decay method
21. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells
22. Influence of annealing and Al2O3 properties on the hydrogen-induced passivation of the Si/SiO2 interface10.1063/1.4709729 ↗
23. Dielectric surface passivation for silicon solar cells: a review
24. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
25. Improved quantitative description of Auger recombination in crystalline silicon
26. Excellent c-Si surface passivation by thermal atomic layer deposited aluminum oxide after industrial firing activation10.1088/0022-3727/46/38/385102 ↗
27. Black · 2016
28. Fabrication and modeling of high-efficiency front junction n-type silicon solar cells with tunnel oxide passivating back contact10.1109/JPHOTOV.2017.2715720 ↗
29. High efficiency screen-printed n-type silicon solar cell using co-diffusion of APCVD boron emitter and POCl3 back surface field10.1016/j.cap.2017.11.004 ↗
30. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
31. Evaluation of implantation annealing for highly-doped selective boron emitters suitable for screen-printed contacts10.1016/j.solmat.2013.06.040 ↗
32. Fully screen-printed bifacial large area 22.6% N-type Si solar cell with lightly doped ion-implanted boron emitter and tunnel oxide passivated rear contact10.1016/j.solmat.2020.110585 ↗
33. A freeware 1D emitter model for silicon solar cells
34. Hoex · 2012 · vol. 6 · 4