Ultrahigh detectivity ultraviolet photodetector based on orthorhombic phase CsPbI3 microwire using temperature self-regulating solar reactor
Source abstract
Abstract
Abstract In this study, a temperature self-regulating solar reactor based on VO2 thermochromic coating is demonstrated. The temperature of solar reactor can be stabilized at 68.8 °C, which is corresponded to the critical point of metal-to-insulator transition of VO2. By employing the solar reactor, the orthorhombic phase CsPbI3 microwires have been synthesized through solution phase reaction route. Strong emission peaks at 490 nm and 470 nm have been observed in CsPbI3 microwires under ultraviolet and soft X-ray excitation, respectively. The high performance photodetector based on CsPbI3 microwire show a detectivity of 1.09 × 1014 Jones, responsivity of 4.72 A/W, rapid rise and decay time of 0.96 and 0.93 s at 325 nm. Our results demonstrate that the temperature self-regulating solar reactor can be applied for energy-saving solution phase reactor for synthesizing high quality inorganic materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Advanced Photocatalysis Techniques · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Coagulated SnO2 colloids for high-performance planar perovskite solar cells with negligible hysteresis and improved stability10.1002/anie.201904945 ↗
2. Doping-induced amorphization, vacancy, and gradient energy band in SnS2 nanosheet arrays for improved photoelectrochemical water splitting10.1002/anie.201902411 ↗
3. Three-dimensional network electrolytes with highly efficient ion-transporting channels for quasi-solid-state dye-sensitized solar cells10.1016/j.jpowsour.2015.02.022 ↗
4. Friedel–crafts acylation using solar irradiation10.1021/sc4002802 ↗
5. Wolff–Kishner reduction reactions using a solar irradiation heat source and a green solvent system10.1080/17518253.2014.966866 ↗
6. Diels–alder reaction using a solar irradiation heat source designed for undergraduate organic chemistry Laboratories10.1021/ed500850c ↗
7. MOF-derived C-doped ZnO composites for enhanced photocatalytic performance under visible light10.1016/j.jallcom.2018.10.383 ↗
8. Carbon quantum dot-decorated TiO2 for fast and sustainable antibacterial properties under visible-light10.1016/j.jallcom.2018.10.191 ↗
9. TiO2-based heterojunction photocatalysts for photocatalytic reduction of CO2 into solar fuels10.1039/C8TA08879A ↗
10. Photochemical construction of free-standing Sn-filled SnO2 nanotube array on a solution surface for flexible use in photocatalysis10.1039/c1jm10887e ↗
11. High efficiency photocatalytic hydrogen production over ternary Cu/TiO2@Ti3C2Tx enabled by low-work-function 2D titanium carbide10.1016/j.nanoen.2018.08.040 ↗
12. g-C3N4 decorated ZnO nanorod arrays for enhanced photoelectrocatalytic performance10.1016/j.apsusc.2015.08.066 ↗
13. Cerium-based hybrid nanorods for synergetic photo-thermocatalytic degradation of organic pollutants10.1039/C8TA06565A ↗
14. MOF-based transparent passivation layer modified ZnO nanorod arrays for enhanced photo-electrochemical water splitting10.1002/aenm.201800101 ↗
15. Embedding Au quantum dots in rimous cadmium sulfide nanospheres for enhanced photocatalytic hydrogen evolution10.1002/smll.201602870 ↗
16. Double-shelled CdS- and CdSe-cosensitized ZnO porous nanotube Arrays for superior photoelectrocatalytic applications10.1021/acsami.5b03527 ↗
17. Multi-functional Ni3C cocatalyst/g-C3N4 nanoheterojunctions for robust photocatalytic H2 evolution under visible light10.1039/C8TA03048K ↗
18. Solar photochemical synthesis: from the beginnings of organic photochemistry to the solar manufacturing of commodity chemicals10.1021/acs.chemrev.5b00720 ↗
19. Plasmon-engineered anti-replacement synthesis of naked Cu nanoclusters with ultrahigh electrocatalytic activity10.1039/C8TA06789A ↗
20. Synthesis of naked plasmonic/magnetic Au/Fe3O4 nanostructures by plasmon-driven anti-replacement reaction
21. 3D cross-linked BiOI decorated ZnO/CdS nanorod arrays: a cost-effective hydrogen evolution photoanode with high photoelectrocatalytic activity10.1016/j.ijhydene.2019.06.059 ↗
22. Light triggered interfacial damage self-healing of poly(p-phenylene benzobisoxazole) fiber composites10.1088/1361-6528/aab010 ↗
23. 3D hierarchical porous sponge-like V2O5 micro/nano-structures for high-performance Li-ion batteries10.1016/j.jallcom.2018.06.314 ↗
24. One-step and short-time synthesis of 3D NaV2O5 mesocrystal as anode materials of Na-Ion batteries10.1016/j.jpowsour.2018.05.067 ↗
25. Ultrathin nanoribbons of in situ carbon-coated V3O7·H2O for high-energy and long-life Li-ion batteries: synthesis, electrochemical performance, and charge–discharge behavior10.1021/acsami.7b01504 ↗
26. Active and dynamic infrared switching of VO2 (M) nanoparticle film on ITO glass10.1039/C5TC04046A ↗
27. Gradient energy band driven high-performance self-powered perovskite/CdS photodetector10.1002/adma.201806725 ↗
28. Ultrahigh-performance flexible and self-powered photodetectors with ferroelectric P(VDF-TrFE)/Perovskite bulk heterojunction10.1002/adfm.201808415 ↗
29. Photodetectors based on inorganic halide perovskites: materials and devices
30. High performance and stable All-inorganic metal halide perovskite-based photodetectors for optical communication applications10.1002/adma.201803422 ↗
31. Low temperature synthesis of CsPbI3 sub-micrometer wires with tailored emission band for flexible X-ray phosphors applications10.1016/j.jlumin.2017.04.069 ↗
32. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals10.1038/nphoton.2016.41 ↗
33. Detection of X-ray photons by solution-processed lead halide perovskites10.1038/nphoton.2015.82 ↗
34. Frequency upconverted amplified spontaneous emission and lasing from inorganic perovskite under simultaneous six-photon absorption10.1364/OL.43.002066 ↗
35. Lasing characteristics of single-crystalline CsPbCl3 perovskite microcavities under multiphoton excitation10.1088/1361-6463/aa6cf5 ↗
36. Two-Photon-pumped perovskite semiconductor nanocrystal lasers10.1021/jacs.5b12662 ↗
37. Stable, efficient red perovskite light-emitting diodes by (α, δ)-CsPbI3 phase engineering10.1002/adfm.201804285 ↗
38. Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent10.1038/s41586-018-0575-3 ↗
39. Perovskite energy funnels for efficient light-emitting diodes10.1038/nnano.2016.110 ↗
40. Simplified perovskite solar cell with 4.1% efficiency employing inorganic CsPbBr3 as light absorber10.1002/smll.201704443 ↗
41. Structural, optical, and electrical properties of phase-controlled cesium lead iodide nanowires10.1007/s12274-016-1415-0 ↗
42. Defect-mediated phase transition temperature of VO2 (M) nanoparticles with excellent thermochromic performance and low threshold voltage10.1039/c3ta14822j ↗
43. Reduced silanized graphene oxide/epoxy-polyurethane composites with enhanced thermal and mechanical properties10.1016/j.apsusc.2014.07.058 ↗
44. Solution-phase synthesis of cesium lead halide perovskite nanowires10.1021/jacs.5b05404 ↗
45. Energy transfer and multicolor tunable emission in single-phase Tb3+, Eu3+ co-doped Sr3La(PO4)3 phosphors10.1016/j.ceramint.2016.05.202 ↗
46. Regulation of morphologies and luminescence of β-NaGdF4:Ybc+,Er3+ upconversion nanoparticles by hydrothermal method and their dual-mode thermometric properties10.1016/j.apsusc.2018.09.209 ↗
47. Photoluminescence and thermal stability of Tb3+-doped K4SrSi3O9 phosphor with electron transition mechanisms10.1016/j.materresbull.2019.110523 ↗
48. Synthesis and photoluminescence of Eu2+ doped Lu2CaMg2Si3O12 garnet phosphors10.1016/j.matlet.2015.10.144 ↗
49. Effect of alkali metal ions on structure and luminescent properties of red emitting -Ca3(PO4)2:Eu3+phosphor10.2109/jcersj2.123.69 ↗
50. Ultrahigh detectivity and wide dynamic range ultraviolet photodetectors based on BixSn1–xO2 intermediate band semiconductor10.1021/acsami.7b06058 ↗
51. Fast and sensitive solution-processed visible-blind perovskite UV photodetectors10.1002/adma.201601196 ↗
52. All inorganic cesium lead iodide perovskite nanowires with stabilized cubic phase at room temperature and nanowire array-based photodetectors10.1021/acs.nanolett.7b02101 ↗
53. An ultrafast-temporally-responsive flexible photodetector with high sensitivity based on high-crystallinity organic–inorganic perovskite nanoflake10.1039/C7NR04395C ↗
54. Controllable vapor-phase growth of inorganic perovskite microwire networks for high-efficiency and temperature-stable photodetectors10.1021/acsphotonics.8b00348 ↗
55. Healing all-inorganic perovskite films via recyclable dissolution–recyrstallization for compact and smooth carrier channels of optoelectronic devices with high stability10.1002/adfm.201601571 ↗
56. Performance-enhancing broadband and flexible photodetectors based on perovskite/ZnO-nanowire hybrid structures10.1002/adom.201700206 ↗
57. Self-powered dual-color UV–green photodetectors based on SnO2 millimeter wire and microwires/CsPbBr3 particle heterojunctions10.1021/acs.jpclett.9b00154 ↗
58. Optimization of all figure-of-merits in well-aligned GaN microwire array based Schottky UV photodetectors by Si doping10.1021/acsphotonics.9b00363 ↗
59. High—performance solar-blind deep ultraviolet photodetector based on individual single-crystalline Zn2GeO4 nanowire10.1002/adfm.201504135 ↗
60. Oxide electronics utilizing ultrafast metal-insulator transitions10.1146/annurev-matsci-062910-100347 ↗