journal article·2020-02

Preparation and characterization of poly (N-methylol acrylamide)/polyethylene glycol composite phase change materials for thermal energy storage

Xinquan Zou, Weidong Zhou, Junfeng Shi, Yongming Ye, Yunhe Zhao, Hong Zhang, Yuanfa Liu, Yue Yu, Jing Guo

Publisher page

Abstract

Abstract The cross-linked poly (N-methylol acrylamide)/polyethylene glycol (PN-MA/PEG) with an interpenetrating polymer network (IPN) was prepared by emulsion polymerization as composite phase change material (CPCM). N, N′-methylene bisacrylamide (MBA) was used for crosslinking agent. The prepared CPCM was characterized by Fourier Transform Infrared (FT-IR) spectroscopy, X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), thermal cycle test, Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM). FT-IR results stated that there is no chemical interaction between PEG and PN-MA. XRD results indicated that the introduction of PN-MA did not change the crystal type of PEG. PEG still exhibits crystallization behavior under the constraints of cross-linked PN-MA. The DSC results indicated that CPCM melts at 26.24 °C with a latent heat of 106.5 J/g and solidifies at 32.56 °C with a latent heat of 104.9 J/g. The TGA results indicated that the CPCM has good thermal stability and is suitable for thermal energy storage application. The results of thermal cycle test indicated that the macroscopic morphology and latent heat of CPCM were almost unchanged after 40 thermal cycles. SEM and TEM results indicated that the microscopic morphology of CPCM was spherical and the particle size distribution was around 145 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Synthesis and characterization of microencapsulated myristic acid–palmitic acid eutectic mixture as phase change material for thermal energy storage10.1016/j.apenergy.2017.06.082 ↗
2. Thermal energy storage characteristics of poly(styrene-co-maleic anhydride)-graft-PEG as polymeric solid-solid phase change materials10.1016/j.solmat.2016.12.001 ↗
3. Polyethylene glycol based graphene aerogel confined phase change materials with high thermal stability10.1166/jnn.2018.14635 ↗
4. Interpenetrating Polymer Networks polysaccharide hydrogels for drug delivery and tissue engineering10.1016/j.addr.2013.04.002 ↗
5. Mode I and mode II delamination resistance and mechanical properties of woven glass/epoxy-PU IPN composites10.1002/pc.20371 ↗
6. Taste masking of ciprofloxacin by ion-exchange resin and sustain release at gastric-intestinal through interpenetrating polymer network
7. Preparation of sound absorption material based on interpenetrating polymer network (PU/PMMA IPN)
8. A novel blend material to improve the crystallization and mechanical properties of poly (ethylene terephthalate)10.1007/s10965-019-1809-2 ↗
9. Design and applications of interpenetrating polymer network hydrogels: a review10.1016/j.cej.2014.01.065 ↗
10. Chitosan/poly (dimethylaminoethylmethacrylate-co-hydroxyethylacrylate) based semi-IPN hydrogels and silver nanocomposites: synthesis, evaluation of amoxicillin release studies, and antibacterial studies10.1080/00914037.2018.1517349 ↗
11. Development of photocrosslinked salecan composite hydrogel embedding titanium carbide nanoparticles as cell scaffold10.1016/j.ijbiomac.2018.11.125 ↗
12. Novel biodegradable hydrogel based on natural polymers: synthesis, characterization, swelling/reswelling and biodegradability10.1016/j.eurpolymj.2018.10.033 ↗
13. Preparation of sorbitol-based polyurethanes and their semi-interpenetrating polymer networks
14. Multi-walled carbon nanotubes reinforced interpenetrating polymer network with ultrafast self-healing and anti-icing attributes10.1016/j.jcis.2019.01.006 ↗
15. Oscillating swelling-shrinking dynamics and diffusive properties of weakly cationic poly (aminoalkyl methacrylate)-based cryogels: quantifying the influence of polymer network parameters
16. Preparation and properties of toluene-diisocyanate-trimer-modified epoxy resin10.3390/polym11030416 ↗
17. Preparation and characterization of superporous hydrogels as gastroretentive drug delivery ststem for atenolol
18. Interpenetrating polymer network microgels in water: effect of composition on the structural properties and electrosteric interactions10.1002/cphc.201800707 ↗
19. In situ immobilization of glucose oxidase and catalase in a hybrid interpenetrating polymer network by 3D bioprinting and its application10.1016/j.colsurfa.2019.02.021 ↗
20. Starch-based semi-IPN hydrogel nanocomposite integrated with clinoptilolite: preparation and swelling kinetic study10.1016/j.carbpol.2018.08.014 ↗
21. Dashtebayaz,MSS, Interpenetrating networks hydrogels based on hyaluronic acid for drug delivery and tissue engineering10.1080/00914037.2018.1455680 ↗
22. Preparation and characterization of Artemisia sphaerocephala gum composite hydrogels: evaluation of rheological and release behaviour10.1039/C8NJ05326J ↗
23. Semi-interpenetrating polymer network membranes based on a self-crosslinkable comb copolymer for CO2 capture10.1016/j.cej.2018.10.152 ↗
24. In-situ fabrication of rod shaped nano-hydroxyapatite using microwave assisted semi-interpenetrating network as a template-morphology controlled approach10.1016/j.matchemphys.2018.01.028 ↗
25. A novel UV-cured semi-IPN structure PEO@Nano-SiO2 composite polymer electrolyte for lithium metal batteries10.1166/nnl.2019.2898 ↗
26. Mechanical and thermal reinforcement of photocrosslinked salecan composite hydrogel incorporating niobium carbide nanoparticles for cell adhesion10.1016/j.polymertesting.2018.05.048 ↗
27. Semi-interpenetrating solid polymer electrolyte based on thiol-ene cross-linker for all-solid-state lithium batteries10.1016/j.jpowsour.2016.10.008 ↗
28. Polymer nano-hybrid material based on graphene oxide/POSS via surface initiated atom transfer radical polymerization (SI-ATRP): its application in specialty hydrogel system10.1016/j.polymer.2016.09.035 ↗
29. In situ gelation behavior of thermoresponsive poly(N-vinylpyrrolidone)/poly(N-isopropylacrylamide) microgels synthesized by soap-free emulsion polymerization10.1007/s00289-018-2271-8 ↗
30. CO2-responsive polyacrylamide microspheres with interpenetrating networks10.1016/j.jcis.2017.03.012 ↗
31. Preparation of PNHMPA/PEG interpenetrating polymer networks gel and its application for phase change fibers10.1002/app.38654 ↗
32. Interpenetrating phase change polymer networks based on crosslinked polyethylene glycol and poly (hydroxyethyl methacrylate)10.1016/j.solmat.2015.12.040 ↗
33. PEG encapsulated by porous triamide-linked polymers as support for solid-liquid phase change materials for energy storage10.1016/j.cplett.2017.01.028 ↗
34. Preparation,thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage10.1016/j.matchemphys.2007.12.016 ↗
35. Thermal conductivity enhancement of PEG/SiO2 composite PCM by in situ cu doping10.1016/j.solmat.2012.06.012 ↗
36. Synthesis and thermal properties of fatty acid eutectics and diatomite composites as shape-stabilized phase change materials with enhanced thermal conductivity10.1016/j.solmat.2015.05.045 ↗
37. Polyethylene glycol(PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.01.022 ↗
38. Preparation and properties of PEG/SiO2-Ni composite form-stable phase change material