TiO2 nanotubes antireflection coating design for GaAs solar cells
Source abstract
Abstract
Abstract The results of the optimization of antireflection films of TiO2 nanotubes on GaAs solar cells, non-encapsulated and encapsulated, are presented. The ARC forms a bilayer of porous TiO2 over a dense bottom. The films were prepared on Si and GaAs substrates via a versatile electrochemical anodization process which produces films with good optical performance. The thicknesses and porosity of the ARC were optimized numerically with a method based on maximizing the short circuit current. Using experimental indices, the minimum Rw was 1.81% for the non-encapsulated case. For the encapsulated case, the lowest Rw was 2.34%, where the porosity of the top layer was adjusted in addition to the thicknesses. In simulations of a GaAs solar cell, the addition of the optimized ARC resulted in a Jsc increase of 43.6% for the non-encapsulated case, and 36.7% for the encapsulated case.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Optical Coatings and Gratings · Nanowire Synthesis and Applications · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. GaAs thin-film solar cells10.1109/T-ED.1967.15890 ↗
2. GaAs solar cells with AlAs windows
3. Characteristics of high-conversion-efficiency gallium-arsenide solar cells10.1109/IRET-MIL.1962.5008393 ↗
4. TiO2 antireflection coatings by a low temperature spray process10.1149/1.2131603 ↗
5. Plasma nitride AR coatings for silicon solar cells10.1016/0165-1633(82)90091-0 ↗
6. Optimized antireflection coatings for high-efficiency silicon solar cells10.1109/16.119035 ↗
7. Design and simulation of antireßection coating systems for optoelectronic devices: application to silicon solar cells10.1016/S0927-0248(97)00273-0 ↗
8. Optimal design of quadruple-layer antireflection coating structure for conversion efficiency enhancement in crystalline silicon solar cells10.1016/j.ijleo.2017.12.024 ↗
9. Fabrication of three-dimensional GaAs antireflective structures by metal-assisted chemical etching10.1016/j.solmat.2015.08.034 ↗
10. Simulation and fabrication of SiO2/graded-index TiO2 antireflection coating for triple-junction GaAs solar cells by using the hybrid deposition process10.1016/j.tsf.2014.05.024 ↗
11. Optical properties of films and coatings
12. Crystalline silicon solar cells with micro/nano texture10.1016/j.apsusc.2012.10.081 ↗
13. Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection10.1038/nphoton.2007.26 ↗
14. Performance improvement of III–V compound solar cells using nanomesh electrode and nanostructured antireflection structures10.1016/j.solener.2019.05.066 ↗
15. Efficiency enhancement of a single-junction GaAs solar cell with ZnO nanorod arrays as an antireflection layer10.1166/jnn.2017.13410 ↗
16. Broadband nanostructured antireflection coating for enhancing GaAs solar cell performance10.1109/JPHOTOV.2016.2604563 ↗
17. Near zero reflection by nanostructured anti-reflection coating design for Si substrates10.1016/j.spmi.2018.03.014 ↗
18. Broadband and omnidirectional anti-reflection layer for III/V multi-junction solar cells10.1016/j.solmat.2012.02.022 ↗
19. A single-material graded refractive index layer for improving the efficiency of III–V triple-junction solar cells
20. Optimized single and double layer antireflection coatings for GaAs solar cells
21. Broadband antireflective coatings for high efficiency InGaP/GaAs/InGaAsP/InGaAs multi-junction solar cells10.1016/j.solmat.2019.110359 ↗
22. Antireflection coating design for triple-junction III–V/Ge high-efficiency solar cells using low absorption PECVD silicon nitride10.1109/JPHOTOV.2012.2198793 ↗
23. Single-material zinc sulfide bi-layer antireflection coatings for GaAs solar cells”10.1364/OE.21.00A821 ↗
24. Broadband antireflection Mie scatterers revisited—a solar cell and module analysis10.1364/OE.27.00A524 ↗
25. Sorption and optical properties of sol-gel thin films measured by X-Ray reflectometry and ellipsometric porosimetry10.1016/j.tsf.2012.03.018 ↗
26. Antireflecting– passivating dielectric films on crystalline silicon solar cells for space applications”10.1016/j.solmat.2008.03.021 ↗
27. High performance TiO2 nanotubes antireflection coating10.1016/j.mssp.2017.08.037 ↗
28. Influence of fluoride content on the anodic formation of TiO2 nanopores/nanotubes in Ti films
29. Growth control of TiO2 nanotubes in different physical environments10.1080/17458080.2012.663507 ↗
30. A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes10.1016/j.apsusc.2009.09.078 ↗
31. Influence of anodization parameters on the expansion factor of TiO2 nanotubes10.1016/j.electacta.2012.12.094 ↗
32. Tracer investigation of pore formation in anodic titania10.1149/1.2946727 ↗
33. Jenkins · 1981
34. Byrnes · 2016
35. 2003
36. Effective medium models for the optical properties of inhomogeneous materials10.1364/AO.20.000026 ↗
37. Impact of photon recycling on GaAs solar cell designs10.1109/JPHOTOV.2015.2479463 ↗
38. Titanium dioxide (TiO2) (rutile)”
39. 2019
40. Gallium arsenide (GaAs)
41. Optical constants of GaxIn1−xP lattice matched to GaAs10.1063/1.358632 ↗
42. Coverglass radiation-induced multijunction solar cell current-limiting effects10.1109/TNS.2017.2761544 ↗
43. Magnesium fluoride (MgF2)
44. Aluminum oxide (Al2O3)
45. High temperature contact for GaAs solar cells
46. Low-intensity high-temperature (LIHT) solar cells for Venus atmosphere10.1109/JPHOTOV.2018.2871333 ↗
47. Effect of 1 MeV electron irradiation on TiO2/Al2O3/MgF2 anti-reflective coating for GaInP/InGaAs/Ge triple junction solar cells10.1016/j.optmat.2020.110278 ↗
48. Zinc sulfide (ZnS)
49. 2.3% efficiency gains for silicon solar modules using a durable broadband Anti-reflection coating
50. Antireflective coatings for multijunction solar cells under wide-angle ray bundles10.1364/OE.20.008136 ↗
51. Enhanced omnidirectional photovoltaic performance of solar cells using multiple-discrete-layer tailored- and low-refractive index anti-reflection coatings10.1002/adfm.201201032 ↗
52. The influence of the InGaP window layer on the optical and electrical performance of GaAs solar cells10.1088/0268-1242/22/10/008 ↗
53. Further insight on recombination losses in the intrinsic layer of a-Si:H solar cells using computer modeling tools10.1063/1.4983010 ↗
54. Numerical simulation of Ge solar cells using D-AMPS-1D code10.1016/j.physb.2011.12.087 ↗
55. Impact of implementing the Meyer-Neldel behavior of carrier emission pre-factors in solar cell and optical detector modeling10.1063/1.4914038 ↗
56. Range of validity of the surface-photovoltage diffusion length measurement: a computer simulation10.1063/1.341843 ↗
57. Computer modeling of solar cells structures
58. Gallium arsenide10.1142/9789812832078_0004 ↗
59. Gallium indium phosphide
60. Simulating single-junction GaAs solar cells including photon recycling10.1002/pip.699 ↗
61. Empirical low-field mobility model for III–V compounds applicable in device simulation codes10.1063/1.372274 ↗
62. III-V compounds for solar cell applications10.1007/s003390050983 ↗