journal article·2020-06

Ceramic grains: Highly promising hole transport material for solid state QDSSC

J. Kusuma, R Geetha Balakrishna

Publisher page

Abstract

Abstract Polysulphide has proven to be an efficient electrolyte for QDSSC, but at the cost of corroding the counter electrode and degrading the sensitizer due to its high redox potential. In this view for the first time, we have used oxide nanoceramics as low cost, easily processable and highly porous solid-state electrolytes for QDSSCs. High residual porosity and formation of liquid phase nanodomains across grain boundaries have added advantages for adsorption and diffusion in these hole transport layer. Yttria stabilized zirconia and ceria co doped yttria stabilized zirconia are the two solid state electrolytes designed in place of polysulphide. Dopants namely Y3+ and Ce4+ in ZrO2 induces defects, oxygen vacancies and band shifts resulting in good charge transport. The interfaces and charge transfer kinetics suggests, recombination resistance offered by these ceramics avoid the back electron transfers via the downward shift of valence band (VB) much closer to that of sensitizer and also act as barriers (or passivation layer) to effectively suppress electron recombinations, resulting in high stability and Voc of the device. Devices designed with these new HTLs show efficiencies on par with polysulphide; they are extremely stable for almost up to 60 days (in ambient conditions), while cells fabricated with polysulphide electrolyte tend to degrade the device within 5 days.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Energy scenario and vision 2020 in India
2. Quantum dots and their multimodal applications: a review10.3390/ma3042260 ↗
3. Photoexcitation of neodymium doped TiO2 for improved performance in dye-sensitized solar cells10.1016/j.matdes.2016.05.007 ↗
4. Copper deficient Zn–Cu–In–Se quantum dot sensitized solar cells for high efficiency10.1039/C7TA06904A ↗
5. Toward highly efficient CdS/CdSe quantum dots-sensitized solar cells incorporating ordered photoanodes on transparent conductive substrates10.1039/c2cp40568g ↗
6. Modeling high-efficiency quantum dot sensitized solar cells10.1021/nn101534y ↗
7. Reducing interface recombination through mixed nanocrystal interlayers in PbS quantum dot solar cells10.1021/acsami.7b08568 ↗
8. Quantum dot sensitized solar cell: recent advances and future perspectives in photoanode10.1016/j.solmat.2016.05.062 ↗
9. Recent progress in non-platinum counter electrode materials for dye-sensitized solar cells10.1002/celc.201402406 ↗
10. Recent advances in critical materials for quantum dot-sensitized solar cells: a review10.1039/C5TA03280F ↗
11. Highly efficient, stable and reproducible CdSe-sensitized solar cells using copper sulfide as counter electrodes10.1039/C5TA00068H ↗
12. Quasi-solid-state quantum dot sensitized solar cells with power conversion efficiency over 9% and high stability10.1039/C6TA05894A ↗
13. Quantum dot sensitized solar cells with efficiency over 12% based on tetraethyl orthosilicate additive in polysulfide electrolyte10.1039/C7TA04344A ↗
14. Highly durable and efficient quantum dot-sensitized solar cells based on oligomer gel electrolytes10.1021/am501407m ↗
15. Performance enhancement of quantum dot sensitized solar cells by adding electrolyte additives10.1039/C5TA04758G ↗
16. Thiol-based electrolyte additives for high-performance lithium-sulfur batteries10.1016/j.nanoen.2016.12.015 ↗
17. Poly(vinyl pyrrolidone): a superior and general additive in polysulfide electrolytes for high efficiency quantum dot sensitized solar cells10.1039/C6TA04027F ↗
18. Atomic layer deposition of CdS quantum dots for solid-state quantum dot sensitized solar cells10.1002/aenm.201100363 ↗
19. Optimizing photovoltaic performance in CuInS2 and CdS quantum dot-sensitized solar cells by using an agar-based gel polymer electrolyte10.1039/C6RA27635K ↗
20. Benzimidazolium salt-based solid-state electrolytes afford efficient quantum-dot sensitized solar cells10.1039/C7TA02925J ↗
21. A solid-state hybrid solar cell made of nc-TiO2, CdS quantum dots, and P3HT with 2-Amino-1-methylbenzimidazole as an interface modifier10.1021/jp2022264 ↗
22. Takashi Nakamura · 2018
23. Advances-in-ceramics-for-environmental-functional-structural-and energy applications
24. Ionically conducting ceramics as active catalyst supports10.1021/cr4000336 ↗
25. Energetic alignment in nontoxic SnS quantum dot-sensitized solar cell employing spiro-OMeTAD as the solid-state electrolyte10.1088/1468-6996/15/3/035006 ↗
26. Haandle · 2007
27. Ultrasonic-induced disorder engineering on ZnO, ZrO2, Fe2O3 and SnO2 nanocrystals10.1039/C7RA01209H ↗
28. Oxygen-Deficient zirconia (ZrO2-x): a new material for solar light absorption10.1038/srep27218 ↗
29. Fabrication of low-temperature solid oxide fuel cells with a nanothin protective layer by atomic layer deposition10.1186/1556-276X-8-48 ↗
30. Low temperature synthesis process of stabilization of cubic yttria stabilized zirconia spindles: an important high temperature ceramic material10.1088/2053-1591/aa9231 ↗
31. Synthesis and characterization of ceria–yttria co-stabilized zirconia (CYSZ) nanoparticles by sol–gel process for thermal barrier coatings (TBCs) applications10.1007/s10971-015-3639-y ↗
32. Exploration of graphene oxide nanoribbons as excellent electron conducting network for third generation solar cells10.1016/j.solmat.2018.01.039 ↗
33. Interface effects on the ionic conductivity of doped ceria-yttria-stabilized zirconia heterostructures10.1021/acsami.8b01903 ↗
34. Stability of zirconia-ceria-yttria ceramics in hostile environments10.1007/BF00549162 ↗
35. Zirconia and ceria based ceramics and nanoceramics - a review on electrochemical and mechanical properties
36. Synthesis and characterization of yttrium stabilized zirconia nanoparticles10.1590/1980-5373-MR-2016-0196 ↗
37. Processing and microstructure characterization of ceria-doped yttria-stabilized zirconia powder and ceramics10.1016/j.ssi.2006.10.004 ↗
38. Characterization of ceria–yttria stabilized zirconia plasma-sprayed coatings10.1016/j.apsusc.2009.03.071 ↗
39. Ionic conductivity of mesostructured yttria-stabilized zirconia thin films with cubic pore symmetry-on the influence of water on the surface oxygen ion transport10.1021/acsami.5b01001 ↗
40. A ZnS and metal hydroxide composite passivation layer for recombination control in high efficiency quantum dot sensitized solar cells10.1039/C6TA08717E ↗
41. aoki nakazawa, qing shen, and Xinhua Zhong, high efficiency quantum dot sensitized solar cells based on direct adsorption of quantum dots on photoanodes10.1021/acsami.7b05598 ↗
42. High-efficiency cascade CdS/CdSe quantum dot-sensitized solar cells based on hierarchical tetrapod-like ZnO nanoparticles10.1039/c2cp41760j ↗
43. Photovoltaic study of quantum dot-sensitized TiO2/CdS/ZnS solar cell with P3HT or P3OT added10.1007/s10800-016-0972-y ↗