The design and performance evaluation of a high-efficient flexible solar air heater based on transparent spacer fabric composite
Source abstract
Abstract
Abstract In this paper, a novel flexible solar air heater (FSAH) has been rationally designed and fully investigated by practical experiments. The main part of the FSAH is an integrated flexible warp-knitted spacer fabric composite, in which spacer filaments are coated with solar energy absorbing materials by the air spraying method. In this system, flexible spacer fabric composite not only works as a solar thermal energy harvesting layer, but also provides airflow channels for energy transmission. By comparison test, it is found that the outlet temperature and thermal efficiency of FSAH were improved by introducing nano-black carbon particles as solar energy absorbing materials coated on the surface of spacer filaments. An analysis of net energy gain and effective efficiency was then carried out and the best thermohydraulic performance of the as-fabricated FSAH was found at the mass flow velocity of 0.037 kg m−2 s−1. The optimization experiments demonstrated that with the increase of heater length, the outlet temperature and energy gain of FSAH increased, while their thermal efficiency and effective efficiency decreased. Furthermore, to reduce the heat losses from the top layer to the surrounding ambient, another layer of transparent spacer fabric composite was assembled with the FSAH as a thermal insulation layer and its thermal efficiency and effective efficiency were found to be increased by 20%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer Mechanisms · Aerodynamics and Fluid Dynamics Research · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Novel sol–gel based selective coatings: from coil absorber coating to high power coating10.1016/j.solmat.2015.04.010 ↗
2. Comprehensive dependence of triboelectric nanogenerator on dielectric thickness and external impact for high electric outputs
3. Design and optimization of a photo-thermal energy conversion model based on polar bear hair10.1016/j.solmat.2016.09.017 ↗
4. Design and analysis of a medium-temperature, concentrated solar thermal collector for air-conditioning applications10.1016/j.apenergy.2017.01.040 ↗
5. Design and thermal performance evaluation of a novel solar air heater10.1016/j.renene.2014.12.041 ↗
6. Solar dryer with thermal energy storage systems for drying agricultural food products: a review10.1016/j.rser.2010.04.014 ↗
7. Domestic space-heating and solar energy in Ireland10.1002/er.4440040105 ↗
8. Design, construction, and evaluation of a mixed mode solar kiln with black-painted pebble bed for timber seasoning in a tropical setting10.1016/j.rser.2014.09.033 ↗
9. Finding the best configuration for a solar air heater by design and analysis of experiment10.1016/j.enconman.2015.04.058 ↗
10. Performance improvement of double-pass solar air heater – a state of art of review10.1016/j.rser.2017.05.087 ↗
11. A review of the performance of double pass solar air heater10.1016/j.rser.2011.08.012 ↗
12. Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans10.1016/j.renene.2009.03.029 ↗
13. Thermal performance of a packed bed double-pass solar air heater10.1016/j.energy.2006.09.019 ↗
14. Influence of fin height on the performance of a glazed and bladed entrance single-pass solar air heater10.1016/j.solener.2018.01.037 ↗
15. Performance enhancement of solar air heater using herringbone corrugated fins10.1016/j.energy.2017.03.128 ↗
16. Investigation of single and double pass solar air heater with transverse fins and a package wire mesh layer10.1016/j.enconman.2014.10.028 ↗
17. Experimental investigation of a double pass converging finned wire mesh packed bed solar air heater
18. Heat transfer and pressure drop in a channel with multiple 60° V-baffles10.1016/j.icheatmasstransfer.2010.04.003 ↗
19. Numerical study of thermohydraulic performance of solar air heater duct equipped with novel continuous rectangular baffles with high aspect ratio10.1016/j.energy.2017.05.002 ↗
20. Investigation of thermal performance of-double pass-flat and v-corrugated plate solar air heaters
21. Thermal performance assessment of recyclic double-pass flat and V-corrugated plate solar air heaters10.1080/14786451.2015.1007141 ↗
22. Experimental investigation of thermal performance of flat and v-corrugated plate solar air heaters with and without PCM as thermal energy storage10.1016/j.enconman.2016.01.068 ↗
23. Numerical investigation on heat transfer enhancement of solar air heater using sinusoidal corrugations on absorber plate10.1016/j.ijmecsci.2018.01.037 ↗
24. Thermal characteristics of a glazed transpired solar collector with perforating corrugated plate in cold regions10.1016/j.energy.2016.05.064 ↗
25. Investigations on thermal performance characteristics of wire screen packed bed solar air heater10.1016/j.solener.2016.03.040 ↗
26. Thermal and thermohydraulic performance of counter and parallel flow packed bed solar air heaters10.1016/j.renene.2012.03.032 ↗
27. An analytical model to predict the thermal performance of a novel parallel flow packed bed solar air heater10.1016/j.apenergy.2010.12.033 ↗
28. Performance improvement of wire mesh packed double-pass solar air heaters with external recycle10.1016/j.renene.2013.02.005 ↗
29. Exergy evaluation of packed bed solar air heater10.1016/j.rser.2012.04.024 ↗
30. Optimal thermohydraulic performance of a wire mesh packed solar air heater10.1016/j.solener.2005.10.004 ↗
31. Single and double pass solar air heaters with partially perforated cover and packed mesh10.1016/j.energy.2014.06.069 ↗
32. Development and testing of low cost solar energy collectors for heating air10.1016/0038-092X(84)90238-X ↗
33. Performance of cylindrical plastic solar collectors for air heating10.1016/j.enconman.2014.08.012 ↗
34. Performance evaluation of plastic solar air heater with different cross sectional configuration10.1016/j.applthermaleng.2017.04.067 ↗
35. Bionics in textiles: flexible and translucent thermal insulations for solar thermal applications10.1098/rsta.2009.0019 ↗
36. Impact resistance behaviour of silicone coated warp knitted spacer fabrics used for protective clothing10.1080/00405000.2017.1315796 ↗
37. Impact compressive behavior of warp-knitted spacer fabrics for protective applications10.1177/0040517511433147 ↗
38. Development of the warp knitted spacer fabrics for cushion applications10.1177/1528083707081592 ↗
39. Solar thermal energy harvesting properties of spacer fabric composite used for transparent insulation materials10.1016/j.solmat.2017.08.039 ↗
40. Mathematical and experimental analysis on solar thermal energy harvesting performance of the textile-based solar thermal energy collector10.1016/j.renene.2018.05.097 ↗
41. Solar heat harvesting and transparent insulation in textile architecture inspired by polar bear Fur10.1016/j.enbuild.2015.06.053 ↗
42. Design, analysis and performance of a polymer–carbon nanotubes based economic solar collector10.1016/j.solener.2016.04.019 ↗
43. Development of solar air collectors for drying applications10.1016/S0196-8904(03)00158-4 ↗
44. Thermohydraulic performance of packed-bed solar air heaters10.1016/0196-8904(95)00164-9 ↗
45. Low cost solar air heater10.1016/j.enconman.2011.12.019 ↗
46. Improvement of the efficiency of a bare solar collector by means of turbulence promoters10.1016/0306-2619(90)90001-T ↗
47. Experimental energy and exergy analysis of a double-flow solar air heater having different obstacles on absorber plates10.1016/j.buildenv.2007.02.016 ↗