journal article·2014-07

Zn(O,S) buffer prepared by atomic layer deposition for sequentially grown Cu(In,Ga)(Se,S)2 solar cells and modules

S. Merdes, V. Malinen, F. Ziem, I. Lauermann, M. Schüle, F. Stober, F. Hergert, N. Papathanasiou, R. Schlatmann

Publisher page

Abstract

Abstract A sustainable development of the chalcopyrite thin film technology requires the replacement of CdS buffer layer by environment friendly materials. Alternative buffers such as Zn(O,S) and In 2 S 3 have already been successfully developed and led to efficiencies comparable to those of CdS-buffered solar cells. In this contribution, we report the results of the development of Cd-free buffers by atomic layer deposition on Cu(In,Ga)(Se,S) 2 absorbers. Zn(O,S) buffer layers were deposited on sequentially grown Cu(In,Ga)(Se,S) 2 absorbers from Bosch Solar CISTech GmbH. The influence of the absorber surface conditioning and process parameters is studied. Efficiencies and open circuit voltages exceeding 15% and 600 mV, respectively, which are better than those of CdS-buffered references, are achieved with laboratory scale solar cells. Mini-module results show efficiency reaching 11.4%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. ZSW press release, 24.10.2013, Thin-film photovoltaics achieves 20.8% efficiency and overtakes multicrystalline silicon technology, 〈http://www.zsw-bw.de/en/support/news/news-detail/zsw-stellt-weltrekord-solarzelle-her.html〉.
2. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
3. M. Nakamura, Y. Kouji, Y. Chiba, H. Hakuma, T. Kobayashi and T. Nakada, Achievement of 19.7% efficiency with a small-sized Cu(In,Ga)(Se,S)2 solar cells prepared by sulfurization after selenization process with Zn-based buffer, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, Tampa, Florida, 2013, pp.0849-0852.10.1109/PVSC.2013.6744278 ↗
4. S. Spiering, S. Chowdhury, A. Dresel, D. Hariskos, A. Eicke, M. Powalla, Evaporated indium sulphide as buffer layer in Cu(In,Ga)Se2- based solar cells, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, 2006, pp. 1847–1852.
5. High-efficient Cd-free CuInS2 thin-film solar cells and mini-modules with Zn(S,O) buffer layers prepared by an alternative chemical bath process10.1002/pip.682 ↗
6. N.R. Bhattacharya, M.A. Contreras, G. Teeter, 18.5% copper indium gallium dielenide (CIGS) device using single-layer chemical-bath-deposited ZnS(O,OH), Jpn. J. Appl. Phys. 43 (2004) L 1475-L 1476.10.1143/JJAP.43.L1475 ↗
7. Quality and stability of compound indium sulphide as source material for buffer layers in Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2008.09.015 ↗
8. Zn(O, S) layers for chalcoyprite solar cells sputtered from a single target10.1051/epjpv/2012011 ↗
9. ILGAR In2S3 buffer layers for Cd-free Cu(In,Ga)(S,Se)2 solar cells with certified efficiencies above 16%10.1002/pip.2268 ↗
10. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: band alignment and sulfur gradient10.1063/1.2222067 ↗
11. U. Zimmermann, M. Ruth, M. Edoff, Cadmium-free CIGS mini-modules with ALD-grown Zn(O,S)-based buffer layers, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, 2006, pp. 1831–1834.
12. Crystallinity of inorganic films grown by atomic layer deposition: overview and general trends10.1063/1.4757907 ↗
13. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
14. Investigation of Cu(In,Ga)Se2 thin-film formation during the multi-stage co-evaporation process10.1002/pip.1233 ↗
15. Instantaneous preparation of CuInSe2 films from elemental In, Cu, Se particles precursor films in a non-vacuum process10.1016/j.tsf.2008.10.084 ↗
16. Solution-processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell10.1002/pip.1253 ↗
17. Influence of selenization temperature on the properties of CuInSe2 thin films prepared by spin-coating technique10.1002/pssc.200669562 ↗
18. Effect of alternating Cu poor/Cu rich/Cu poor/Cu rich layers of metal naphthenates in the growth process on the properties of CuInSe2 thin films prepared by the spin coating technique10.1016/j.tsf.2008.02.008 ↗
19. Material and device properties of single phase Cu(In,Ga)(Se,S)2 alloys prepared by selenization/sulfurization of metallic alloys10.1016/j.tsf.2003.10.092 ↗
20. F. Karg, V. Probst, J. Rimmasch, W. Riedl, J. Kotschy, J. Holz, R. Treichler, O. Eibl, A. Mitwalsky, A. Kiendl, Novel rapid-thermal-processing for CIS thin film solar cells, in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, Louisville, KY, 1993, pp. 441–446.10.1109/PVSC.1993.347141 ↗
21. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
22. V. Probst, I. Koetschau, E. Novak, A. Jasenek, H. Eschrich, F. Hergert, T. Hahn, J. Feichtinger, M. Maier, B. Walther, V. Nadenau, A new mass production technology for highest efficiency thin film CIS-absorber formation. IEEE Journal of Photovoltaics 4, 2014, 687-692.10.1109/JPHOTOV.2014.2302235 ↗
23. Preparation of homogeneous Cu(InGa)Se2 films by selenization of metal precursors in H2Se atmosphere10.1063/1.114424 ↗
24. CdS/Cu(In,Ga)S2 based solar cells with efficiencies reaching 12.9% prepared by a rapid thermal process10.1002/pip.2165 ↗
25. XPS inverstigation of anodic oxides grown on p-type InP10.1002/sia.740151102 ↗
26. Characterization of carbon nanofibers/ZrO2 ceramic matrix composite10.2478/amm-2013-0018 ↗
27. Wagner · 1979 · 55344
28. Combined electron microscopy and spectroscopy characterization of as-received, acid purified, and oxidized HiPCO single-wall carbon nanotubes10.1016/j.matchar.2009.07.001 ↗
29. Comparison of ZnS-based buffer layers by chemical bath deposition and atomic layer deposition
30. Recombination mechanisms in highly efficient thin film Zn(S,O)/Cu(In,Ga)S2 based solar cells10.1063/1.3266829 ↗
31. Cu(In,Ga)Se2 thin film solar cells with a combined ALD-Zn(O,S) buffer and MOCVD-ZnO:B window layers10.1016/j.solmat.2013.05.052 ↗
32. Photocurrent metastability in Cu(In,Ga)Se2 solar cells with controlled conduction band alignment10.1016/j.cap.2009.11.023 ↗
33. Light soaking effect on photocurrent collection in (Zn,Mg)O/Cu(In,Ga)Se2 solar cells10.1002/pssc.200881143 ↗
34. Effects of combined heat and light soaking on device performance of Cu(In,Ga)Se2 solar cells with ZnS(O,OH) buffer layer10.1002/pip.2339 ↗