journal article·2014-01

Qualification of encapsulation materials for module-level-processing

Verena Steckenreiter, Renate Horbelt, Daniel Nilsen Wright, Martin Nese, Rolf Brendel

Publisher page

Abstract

Abstract Module-level-processing applies cell processing and/or cell interconnection processes while the silicon wafers are attached to a sub- or superstrate, such as the module glass. This thin-film/wafer-hybrid- silicon (HySi) approach offers unique possibilities when using ultra-thin silicon wafers that can hardly be processed free-standing. Liquid adhesives are one option for attaching the wafers to the module glass. Here, we analyze the compatibility of a selection of adhesives with module-level processing. The adhesives have to be stable during wet chemical steps and during thermal treatments. A further requirement is that outgassing from the adhesives should be sufficiently low to allow efficient surface passivation by e.g. plasma enhanced chemical vapor deposition. The adhesives have to withstand UV-irradiation and thermal exposure in order to fulfill warranty requirements. In this work we develop and apply tests for the screening of adhesives. We find that certain liquid addition-curing 2-part silicones pass all the tests and are thus attractive candidates for module-level-processing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · 3D IC and TSV technologies · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
2. Thin-film-silicon solar cells
3. High-efficiency cells from layer transfer: a first step toward thin-film/Wafer Hybrid Silicon Technologies10.1109/JPHOTOV.2011.2165529 ↗
4. Crystalline silicon interconnected strips (XIS): introduction to a new, integrated device and module concept
5. From high-efficiency n-type solar cells to modules exceeding 20% efficiency with aluminum-based cell interconnection, Online version
6. H. Tayanaka, K. Yamauchi, T. Matssushita, Thin-film crystalline silicon solar cells obtained by separation of a porous silicon sacrificial layer, in: Proceedings of the 2nd World Conference on Photovoltaic Solar Energy Conversion, Vienna, Austria, 1998, pp. 1272–1277.
7. R. Brendel, A novel process for ultrathin monocrystalline silicon solar cells on glass, in: Proceedings of the 14th EUPVSEC, Barcelona, Spain, 1997, pp. 1354–1357.
8. Photovoltaic mini-modules from layer transfer by the porous silicon process10.1002/pip.391 ↗
9. B. Terheiden, R. Horbelt, R. Brendel, Thin-film solar cells and modules from the porous silicon process using 6″ Si substrates, in: Proceedings of the 21st EUPVSEC, Dresden, Germany, 2006, pp. 742–745.
10. 18% Efficiency IBC cell with rear-surface processed on quartz10.1109/JPHOTOV.2013.2239359 ↗
11. J. Govaerts, J. Robbelein, C. Gong, B.J. Pawlak, M. Gonzalez, I. De Wolf, F. Bossuyt, S. Van Put, I. Gordon, J. Vanfleteren, G. Beaucarne, A. van der Heide, S. Dewallef, K. Baert, A novel concept for advanced modules with back-contact solar cells, in: Proceedings of the 25th EUPVSEC, Valencia, Spain, 2010, pp. 3850–3853.
12. Development of a-Si:H/c-Si heterojunctions for the i2-module concept: low-temperature passivation and emitter formation on wafers bonded to glass10.1016/j.solmat.2013.01.029 ↗
13. Datasheet, Ultra Fast Cure UC100031E/A, July 2011, [Online], Available from: 〈www.evasa.net〉.
14. Ultraviolet solar radiation at Dhahran, Saudi Arabia10.1016/0038-092X(90)90135-Y ↗
15. Solar UV radiation measurements at Potsdam (52°22′N, 13°5′E)10.1016/0038-092X(92)90162-4 ↗
16. H. Plagwitz, Surface passivation of crystalline silicon solar cells by amorphous silicon films, Ph.D. dissertation, Faculty of Mathematics and Physics, Leibniz University, Hanover, 2007.
17. 2013, February, [Online], Available from: 〈http://www.schott.com/borofloat/german/download/borofloat_33_de.pdf〉.
18. Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500K10.1063/1.333965 ↗
19. Brandschutz Glashandbuch 2010, November 2010, [Online], Available from: 〈www.pilkington.com〉.
20. Correspondence with Polytec PT GmbH, 2008.
21. B. Ketola, K.R. McIntosh, A. Norris, M.K. Tomalia, Silicones for photovoltaic encapsulation, in: Proceedings of the 23rd EUPVSEC, Valencia, Spain, 2008, pp. 2969–2973.
22. Evaluation of encapsulant materials for PV applications
23. Contactless determination of current–voltage characteristics and minority-carrier lifetimes in semiconductors by quasi-steady-state photoconductance data10.1063/1.117723 ↗
24. General parameterization of Auger recombination in crystalline silicon10.1063/1.1432476 ↗
25. Separate contactless measurement of the bulk lifetime and the surface recombination velocity by the harmonic optical generation of the excess carriers10.1016/0038-1101(93)90134-C ↗