journal article·2012-02

Comparison between theoretical and experimental electronic properties of some popular donor polymers for bulk-heterojunction solar cells

Luca Longo, Chiara Carbonera, Andrea Pellegrino, Nicola Perin, Giuliana Schimperna, Alessandra Tacca, Riccardo Po

Publisher page

Abstract

Abstract The theoretical estimation of energy levels and energy gaps of conjugated polymers for polymer solar cells represents in principle an useful tool for an a priori screening of new donor systems. Fourteen polymers, whose energy gaps vary in the range 1.2–3.1 eV have been selected and their HOMO, LUMO and gap energies have been calculated by applying Density Functional Theory methods. In spite of the variety of the examined molecular structures, nice correlations between theoretical and experimental electronic parameters were found. In particular, optical gaps and, to a lesser extent, electrochemical gap very well correlate with theoretical gaps, while for the other parameters (oxidation and reduction potentials) the general trend is reproduced. It is shown that, in general, the theoretical energies of the base repeating units have values close to the experimental energies, but the linear fittings are better when the theoretical data of much longer chains are considered: infinitely long chains must be used to predict the optical gaps, while long oligomers are more appropriate to estimate the electrochemical properties. Criteria and relationships for the prediction of energy data from theoretical ones are provided.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Small bandgap polymers for organic solar cells (Polymer material development in the last 5 years)10.1080/15583720802231833 ↗
2. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
3. Polymer solar cells: recent approaches and achievements10.1021/jp9061362 ↗
4. Organic photovoltaics: a chemical approach10.1039/c003088k ↗
5. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
6. Processable low-bandgap polymers for photovoltaic applications10.1021/cm1021855 ↗
7. Solar cell efficiency tables (version 37)10.1002/pip.1088 ↗
8. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
9. A weak donor-strong acceptor strategy to design ideal polymers for organic solar cells10.1021/am1000344 ↗
10. A tale of current and voltage: interplay of band gap and energy levels of conjugated polymers in bulk heterojunction solar cells10.1021/ma101646r ↗
11. Green dioxythiophene–benzothiadiazole donor-acceptor copolymers for photovoltaic applications10.1021/cm903495b ↗
12. Spectral engineering in π-conjugated polymers with intramolecular donor–acceptor interactions10.1021/ar100043u ↗
13. Donor-acceptor polymers incorporating alkylated dithienylbenzothiadiazole for bulk heterojunction solar cells: pronounced effect of positioning alkyl chains10.1021/ma902241b ↗
14. When function follows form: effects of donor copolymers side chains on film morphology and BHJ solar cell performance10.1002/adma.201002687 ↗
15. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
16. Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗
17. A quantum mechanical perspective into low optical-gap polymers for highly-efficient organic solar cells10.1039/C0SC00642D ↗
18. Bandgap calculations for conjugated polymers10.1016/j.synthmet.2003.08.019 ↗
19. Optical bandgaps of π-conjugated organic materials at the polymer limit: experiment and theory10.1002/adma.200600277 ↗
20. Comparative theoretical study of heterocyclic conducting oligomers: neutral and oxidized forms
21. Fluorine Substituted Conjugated Polymer of Medium Band Gap Yields 7% Efficiency in Polymer-Fullerene Solar Cells10.1021/ja1112595 ↗
22. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
23. Low Band Gap Copolymers based on thiophene and quinoxaline: their electronic energy levels and photovoltaic application10.1002/pola.23419 ↗
24. Benzo[2,1-b;3,4-b′]dithiophene-based low-bandgap polymers for photovoltaic applications10.1002/pola.24481 ↗
25. Conjugated polymers based on C, Si and N-bridged dithiophene and thienopyrroledione units: synthesis, field-effect transistors and bulk heterojunction polymer solar cells10.1039/c0jm03927f ↗
26. Rational design of poly(2,7-carbazole) derivatives for photovoltaic applications10.1002/mats.201000061 ↗
27. Substituent effects and photo-physical properties in polythiophene and its derivatives: A PBC-DFT study10.1016/j.theochem.2008.10.005 ↗
28. Pyridine-EDOT heteroarylene-vinylene donor–acceptor polymers10.1021/ma1017132 ↗
29. Tuning the LUMO level of the acceptor to increase the open-circuit voltage of polymer-fullerene solar cells: a quantum chemical study10.1016/j.solmat.2008.04.010 ↗
30. Higher fullerenes as electron acceptors for polymer solar cells: a quantum chemical study10.1016/j.solmat.2009.06.016 ↗
31. Optical and electrochemical properties of thiophene, fluorene, benzothiadiazole random copolymers for photovoltaic applications10.1007/s10853-011-5321-2 ↗
32. Recommendation on reporting electrode potentials in nonaqueous solvents10.1351/pac198456040461 ↗
33. Parr · 1994
34. Chemistry with ADF10.1002/jcc.1056 ↗
35. E.J. Baerends, T. Ziegler, J. Autschbach, D. Bashford, A. Bérces, F.M. Bickelhaupt, C. Bo, P.M. Boerrigter, L. Cavallo, D.P. Chong, L. Deng, R.M. Dickson, D.E. Ellis, M. van Faassen, L. Fan, T.H. Fischer, C. Fonseca Guerra, A. Ghysels, A. Giammona, S.J.A. van Gisbergen, A.W. Götz, J.A. Groeneveld, O.V. Gritsenko, M. Grüning, S. Gusarov, F.E. Harris, P. van den Hoek, C.R. Jacob, H. Jacobsen, L. Jensen, J.W. Kaminski, G. van Kessel, F. Kootstra, A. Kovalenko, M.V. Krykunov, E. van Lenthe, D.A. McCormack, A. Michalak, M. Mitoraj, J. Neugebauer, V.P. Nicu, L. Noodleman, V.P. Osinga, S. Patchkovskii, P.H.T. Philipsen, D. Post, C.C. Pye, W. Ravenek, J.I. Rodríguez, P. Ros, P.R.T. Schipper, G. Schreckenbach, J.S. Seldenthuis, M. Seth, J.G. Snijders, M. Solà, M. Swart, D. Swerhone, G. te Velde, P. Vernooijs, L. Versluis, L. Visscher, O. Visser, F. Wang, T.A. Wesolowski, E.M. van Wezenbeek, G. Wiesenekker, S.K. Wolff, T.K. Woo, A.L. Yakovlev, ADF2010, SCM, Theoretical Chemistry, Vrije Universiteit, Amsterdam, The Netherlands〈http://www.scm.com〉
36. Atomic shielding constants10.1103/PhysRev.36.57 ↗
37. Extremely compact formulas for molecular two-center and one-electron integrals and Coulomb integrals over Slater-type atomic orbitals10.1103/PhysRevA.18.1 ↗
38. Multicenter integrals in quantum mechanics. 2. Evaluation of electron-repulsion integrals for Slater-type orbitals10.1063/1.1727293 ↗
39. On the calculation of bonding energies by the Hartree Fock Slater method. I. the transition state method10.1007/BF02401406 ↗
40. Accurate spin-dependent electron liquid correlation energies for local spin density calculations: a critical analysis10.1139/p80-159 ↗
41. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
42. Density-functional exchange-energy approximation with correct asymptotic behavior10.1103/PhysRevA.38.3098 ↗
43. Density-functional approximation for the correlation energy of the inhomogeneous electron gas10.1103/PhysRevB.33.8822 ↗
44. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
45. Photoinduced charge separation in photovoltaic cell with heterojunction of p- and n-type conjugated polymers10.1016/S0040-6090(98)00901-8 ↗
46. Flexible large area solar cells based on poly(3-hexylthiophene)/fullerene
47. Manipulation of charge carrier injection into organic field-effect transistors by self-assembled monolayers of alkanethiols10.1039/b617995a ↗
48. All-solution based device engineering of multilayer polymeric photodiodes: minimizing dark current10.1063/1.3120547 ↗
49. Small-Bandgap Conducting Polymers Based on Conjugated Poly(heteroarylene methines). 2. Synthesis, Structure, and Properties10.1021/ma00106a009 ↗
50. An alternating low band-gap polyfluorene for optoelectronic devices10.1016/j.polymer.2006.03.110 ↗
51. Small band gap polymers based on diketopyrrolepyrrole10.1039/b919066j ↗
52. Efficient polymer solar cells with thin active layers based on alternating polyfluorene copolymer/fullerene bulk heterojunctions10.1002/adma.200900510 ↗
53. Electrochemical and optical studies of the band gaps of alternating polyfluorene copolymers10.1016/j.synthmet.2006.02.013 ↗
54. High-performance polymer heterojunction solar cells of a polysilafluorene derivative10.1063/1.2836266 ↗
55. Solution-processed zinc oxide thin film as a buffer layer for polymer solar cells with an inverted device structure10.1021/jp1003984 ↗
56. A low-bandgap poly(2,7-carbazole) derivative for use in high performance solar cells10.1002/adma.200602496 ↗
57. Synthesis and photovoltaic properties of two benzo[1,2-b:3,4-b′]dithiophene-based conjugated polymers10.1021/jp9060413 ↗
58. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
59. Synthesis, characterization and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
60. Low bandgap π-conjugated copolymers based on fused thiophenes and benzothiadiazole: synthesis and structure-property relationship study10.1002/pola.23601 ↗
61. Novel NIR-absorbing conjugated polymers for efficient polymer solar cells: effect of alkyl chain length on device performance10.1039/b818885h ↗
62. Development of New Semiconducting Polymers for High Performance Solar Cells10.1021/ja808373p ↗
63. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
64. New conjugated polymers for plastic solar cells10.1039/c1ee01072g ↗
65. Electrochemical Considerations for Determining Absolute Frontier Orbital Energy Levels of Conjugated Polymers for Solar Cell Applications10.1002/adma.201004554 ↗
66. Synthesis and Electrochemical and Optical Properties of Novel Poly(aryl ether)s with Isolated Carbazole and p-Quaterphenyl Chromophores10.1021/ma001855z ↗
67. The absolute electrode potential: an explanatory note10.1351/pac198658070955 ↗
68. Designing Acceptor Polymers for Organic Photovoltaic Devices10.1021/jp110990w ↗
69. Ternary thiophene-X-Thiophene semiconductor building blocks (X=fluorene, carbazole, phenothiazine): modulating electronic properties and electropolymerization ability by tuning the X Core10.1016/j.electacta.2011.05.036 ↗
70. Electrochemical bandgaps of substituted polythiophenes10.1039/B301403G ↗
71. Quantitatively analyzing the influence of side chains on photovoltaic properties of polymer–fullerene solar cells10.1021/jp106640r ↗
72. Electronic structure and charge-transport properties of polythiophene chains containing thienothiophene units: a joint experimental and theoretical study10.1021/cm071279m ↗
73. From short conjugated oligomers to conjugated polymers. Lessons from studies on long conjugated oligomers10.1021/ar1000555 ↗
74. Ueber die Zuordaung von Wellenfunktionen und Eigenwerten zu den einzelnen Elektronen eines Atoms10.1016/S0031-8914(34)90011-2 ↗
75. Electrochemical bandgaps of substituted polythiophenes10.1039/B301403G ↗
76. Origin of the Open Circuit Voltage of Plastic Solar Cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
77. Infrared photocurrent spectral response from plastic solar cell with low-band-gap polyfluorene and fullerene derivative10.1063/1.1825070 ↗