journal article·2013-08Open access

Chalcopyrite thin-film solar cells by industry-compatible ink-based process

F. Roux, S. Amtablian, M. Anton, G. Besnard, L. Bilhaut, P. Bommersbach, J. Braillon, C. Cayron, A. Disdier, H. Fournier, J. Garnier, A. Jannaud, J. Jouhannaud, A. Kaminski, N. Karst, S. Noël, S. Perraud, O. Poncelet, O. Raccurt, D. Rapisarda, A. Ricaud, D. Rouchon, M. Roumanie, E. Rouviere, O. Sicardy, F. Sonier, K. Tarasov, F. Tardif, M. Tomassini, J. Villanova

Abstract

We developed a new industry-compatible ink-based process to produce efficient chalcopyrite CuIn1-xGaxSe2 thin-film solar cells. Metallic In and Ga nanoparticles were produced by purely physical methods, using a low-cost and non-explosive solvent. The solvent acts as a protection against oxidation and can be removed without leaving carbon contamination. We formulated inks that can be safely coated in air by doctor blading. The precursors were converted into a functional absorber after annealing under Se vapors in a primary vacuum. This simple two-step process led to chalcopyrite CuIn1-xGaxSe2 thin-films with strong mechanical adhesion, and power conversion efficiency higher than 7%. © 2013 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Properties of ZnO/CdS/CuInSe2 solar cells with improved performance10.1002/pip.537 ↗
2. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
3. Nanosolar, Ultra-Low-Cost Solar Electricity Cells: An Overview of Nanosolar's Cell Technology Platform Ultra-Low-Cost Solar Electricity Cells, Nanosolar White Paper, 2009.
4. G. Brown, P. Stone, J. Woodruff, B. Cardozo, D. Jackrel, Device characteristics of a 17.1% efficient solar cell deposited by a non-vacuum printing method on flexible foil, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference, 2012, pp. 003230–003233.10.1109/PVSC.2012.6318265 ↗
5. Solution-processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell10.1002/pip.1253 ↗
6. 12% efficiency CuIn(Se,S)2 photovoltaic device prepared using a hydrazine solution process10.1021/cm901950q ↗
7. CIS Film growth by metallic ink coating and selenization10.1016/S0927-0248(99)00075-6 ↗
8. Citrate-capped Cu11In9 nanoparticles and its use for thin-film manufacturing of CIS solar cells10.1021/cm2024668 ↗
9. R.A. Sinton, A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, 2000.
10. 1-dodecanethiol self-assembled monolayers on cobalt10.1021/la2026957 ↗
11. Protective properties of dodecanethiol layers on copper surfaces: the effect of chloride anions in aqueous environments10.1021/la000852c ↗
12. Structural analysis of saturated Aalkanethiolate monolayers on Cu(100): coexistence of thiolate and sulfide species10.1021/la0107852 ↗
13. Adsorption of dodecanethiol on Cu(110): structural ordering upon thiolate formation10.1021/la025661j ↗
14. S.R. Nava, Temperature Programmed Desorption Study of Dodecanethiol Self-Assembled Monolayers on Ag, Ph.D. Thesis, 2009.
15. Direct liquid coating of chalcopyrite light-absorbing layers for photovoltaic devices10.1002/ejic.200900837 ↗
16. I. Klugius, C. Gemmel, A. Quintilla, V. Haug, E. Ahlswede, CIS low-cost thin-film solar cells made from elemental metallic nanoparticles: comparison of selenization parameters, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 003446–003449.10.1109/PVSC.2010.5614648 ↗
17. Thin film Cu(In,Ga)Se2 solar cells processed from solution pastes with polymethyl methacrylate binder10.1016/j.tsf.2011.01.136 ↗
18. CuInSe2 low-cost thin-film solar cells made from commercial elemental metallic nanoparticles10.1002/pssr.200903418 ↗
19. Composition, structure and optical properties of sputtered thin films of CuInSe210.1016/j.tsf.2005.09.077 ↗
20. Low-cost CIGS solar cells by paste coating and selenization10.1016/j.tsf.2004.11.007 ↗
21. Anion distributions and phase-transitions in CuS1−xSex (x=0–1) studied by Raman spectroscopy10.1006/jssc.1993.1242 ↗
22. Lattice vibrations of CulnSe2 and CuGaSe2 by Raman microspectrometry10.1063/1.352195 ↗
23. One-step electrodeposited CuInSe2 thin films studied by Raman spectroscopy10.1016/j.tsf.2007.02.109 ↗
24. Optoelectronic characteristics of Cu(In,Ga)(S,Se)2 thin film solar cells obtained from varied chalcogenization processes10.1016/j.tsf.2011.01.141 ↗