Feasibility test of drastic indium cut down in SHJ solar cells and modules using ultra-thin ITO layers
Source abstract
Abstract
In this work, we investigate the possibility to drastically decrease the indium (In) consumption in silicon heterojunction (SHJ) solar cells, using ultrathin (<15 nm) ITO layers on both cell sides, in combination with SiN:H capping dielectric layers. The best ITO/dielectric combinations were assessed using optical simulations. The optimal stacks were integrated on front, rear, and both sides of complete SHJ cells. Two types of nanocrystalline layers (nc-Si:H and nc-SiO x :H) were implemented as selective layers on the front side, and proved to relax the constraints on the front ITO conductivity. Among all conditions including 100 nm references, the highest module efficiencies were obtained with 15 nm front ITO (22.4%), while modules with ITO layers below 10 nm on nc-Si:H showed very low efficiency losses compared to the reference. Integration of such ultrathin ITO layers on the rear side proved to be non-optimal since the Fill Factor (FF) losses are not counterbalanced with current gains (contrary to what is observed on the front side with ultra-thin ITO). Finally, UV reliability tests were performed and showed an enhanced reliability for modules with thinner ITO layers. After 60 kW h.m −2 of UV exposure, modules with 5 nm ITO on nc-Si:H showed the best efficiencies among all tested conditions. Subsequent damp heat tests were also performed and did not show a clear warning against using ultrathin ITOs on the front side, and in the end, modules with nc-Si:H layers feature the highest efficiencies at the end of the reliability sequence.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers
2. « Day 2: TaiyangNews High Efficiency Solar Technologies Conference | TaiyangNews ». https://taiyangnews.info/technology/day-2-taiyangnews-high-efficiency-solar-technologies-conference/(consulté le 1 décembre 2022).
3. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
4. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
5. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
6. Cruz · 2020 · 10
7. Field assessment of transparent conductive oxides stability under outdoor conditions
8. Comparative study on IWO and ICO transparent conductive oxide films prepared by reactive plasma deposition for copper electroplated silicon heterojunction solar cell10.1007/s10854-021-07689-2 ↗
9. D. F. Menchini, « High-Mobility IWO Films Deposited in Nonreactive Plasma by RF Sputtering. », p. 3.
10. Influence of oxygen on sputtered titanium-doped indium oxide thin films and their application in silicon heterojunction solar cells10.1002/solr.202000501 ↗
11. Highly conductive and broadband transparent Zr-doped in 2 O 3 as front electrode for solar cells10.1109/JPHOTOV.2018.2851306 ↗
12. The sputter deposition of broadband transparent and highly conductive cerium and hydrogen co‐doped indium oxide and its transfer to silicon heterojunction solar cells10.1002/pip.3388 ↗
13. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
14. IZO/ITO double-layered transparent conductive oxide for silicon heterojunction solar cells10.1109/ACCESS.2022.3192646 ↗
15. Influence of Al2O3/IZO double-layer antireflective coating on the front side of rear emitter silicon heterojunction solar cell10.1016/j.vacuum.2022.110967 ↗
16. Lokanc · 2015
17. « towards sustainable silicon PV manufacturing at the terawatt level », présenté à SiliconPV 2021
18. Grohol · 2023
19. Chunduri · 2023
20. Silicon heterojunction solar cells: techno-economic assessment and opportunities10.1016/j.joule.2022.02.009 ↗
21. Influence of silicon layers on the growth of ITO and AZO in silicon heterojunction solar cells10.1109/JPHOTOV.2019.2957665 ↗
22. ITO-free silicon heterojunction solar cells with ZnO:Al/SiO 2 front electrodes reaching a conversion efficiency of 2310.1109/JPHOTOV.2018.2873307 ↗
23. gt; 85% indium reduction for high-efficiency silicon heterojunction solar cells with aluminum-doped zinc oxide contacts10.1016/j.solmat.2022.112120 ↗
24. Power conversion efficiency of 25.26% for silicon heterojunction solar cell with transition metal element doped indium oxide transparent conductive film as front electrode10.1002/pip.3565 ↗
25. Graphene as non conventional transparent conductive electrode in silicon heterojunction solar cells10.1016/j.apsusc.2020.146443 ↗
26. Transparent-conductive-oxide-free front contacts for high-efficiency silicon heterojunction solar cells10.1016/j.joule.2021.04.004 ↗
27. Enabling transparent-conductive-oxide free efficient heterojunction solar cells by flexibly using dopant-free contact
28. « Reduction of resource critical materials in the SHJ production »
29. Stannowski · 2021
30. Application of indium tin oxide/aluminum-doped zinc oxide transparent conductive oxide stack films in silicon heterojunction solar cells10.1021/acsaem.1c02209 ↗
31. Improved opto-electronic properties of silicon heterojunction solar cells with SiO x/Tungsten-doped indium oxide double anti-reflective coatings10.7567/JJAP.56.08MB09 ↗
32. Surface passivation of ITO on heterojunction solar cells with enhanced cell performance and module reliability10.1149/2162-8777/abeece ↗
33. Paths for maximal light incoupling and excellent electrical performances in silicon heterojunction solar cells
34. « Optoelectrical analysis of TCO+Silicon oxide double layers at the front and rear side of silicon heterojunction solar cells »
35. ITO/SiOx:H stacks for silicon heterojunction solar cells10.1016/j.solmat.2016.05.024 ↗
36. U. Heitmann, « Substitution of ITO by a Low-Cost Sprayed TiOx Capping Layer for SHJ Solar Cells », p. 5.
37. Towards bifacial silicon heterojunction solar cells with reduced TCO use
38. Design and fabrication of a SiOx/ITO double-layer anti-reflective coating for heterojunction silicon solar cells10.1016/j.solmat.2013.05.044 ↗
39. Damp-heat-stable, high-efficiency, industrial-size silicon heterojunction solar cells10.1016/j.joule.2020.03.003 ↗
40. Integration of thin n-type nc-Si:H layers in the window-multilayer stack of heterojunction solar cells10.1016/j.solmat.2022.111975 ↗
41. Light-induced performance increase of silicon heterojunction solar cells10.1063/1.4964835 ↗
42. Synergistic effect of CO2 and PH3 on the properties of n-type nanocrystalline silicon oxide prepared by plasma-enhanced chemical vapor deposition10.1007/s10854-020-05034-7 ↗
43. Towards an industrial in-line solution for efficient post-treatment of silicon heterojunction solar cells10.1016/j.solmat.2022.111867 ↗
44. Effect of oxygen and hydrogen flow ratio on indium tin oxide films in rear-junction silicon heterojunction solar cells10.1016/j.solener.2021.12.007 ↗
45. Hydrogen doping of Indium Tin Oxide due to thermal treatment of hetero-junction solar cells10.1016/j.tsf.2015.12.027 ↗
46. Challenges for efficient integration of SHJ based solar cells in shingle module configuration
47. Avenel · 2017
48. Optical model for thin-film photovoltaic devices with large surface textures at the
49. Lateral transport in silicon solar cells10.1063/1.5139416 ↗
50. Veirman · 2021
51. Validity of simplified Shockley-Read-Hall statistics for modeling carrier lifetimes in crystalline silicon10.1103/PhysRevB.67.075203 ↗
52. Reassessment of intrinsic lifetime limit in n-type crystalline silicon and implication on maximum solar cell efficiency10.1016/j.solmat.2018.06.029 ↗
53. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
54. A unified mobility model for device simulation—I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
55. Reassessment of the intrinsic carrier density temperature dependence in crystalline silicon10.1063/1.4867776 ↗
56. Reassessment of the intrinsic carrier density in crystalline silicon in view of band-gap narrowing10.1063/1.1529297 ↗
57. Characterization of a-Si:H∕c-Si interfaces by effective-lifetime measurements10.1063/1.2128047 ↗
58. Juneja · 2019
59. Amorphous indium oxide10.1016/0040-6090(91)90255-V ↗
60. In depth analysis of transfer length method application on passivated contacts under illumination10.1016/j.solmat.2021.111255 ↗
61. Rear emitter silicon heterojunction solar cells: fewer restrictions on the optoelectrical properties of front side TCOs10.1016/j.egypro.2014.08.035 ↗
62. F. Jay et al., « Reduction in indium usage for silicon heterojunction solar cells in a short-term industrial perspective », Sol. RRL, vol. n/a, no n/a, p. 2200598, doi: 10.1002/solr.202200598.10.1002/solr.202200598 ↗
63. Shallow donor state of hydrogen in in 2 O 3 and SnO 2 : implications for conductivity in transparent conducting oxides10.1103/PhysRevB.80.081201 ↗
64. Origins of hydrogen that passivates bulk defects in silicon heterojunction solar cells10.1063/1.5132368 ↗
65. Influence of light soaking on silicon heterojunction solar cells with various architectures
66. Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure10.1039/c2cp42448g ↗
67. Potential‐free sodium‐induced degradation of silicon heterojunction solar cells10.1002/pip.3698 ↗