journal article·2023-08Open access

Laser-texturing of stainless steel as a corrosion mitigation strategy for high-temperature molten salts applications under dynamic conditions

Luis González-Fernández, Argyrios Anagnostopoulos, Themistoklis Karkantonis, Stefan Dimov, Mirosław Chorążewski, Yulong Ding, Yaroslav Grosu

Abstract

Molten salts are utilized in a wide range of applications including nuclear, fuel cells, Carnot batteries, and Concentrated Solar Power (CSP). In order to enhance the profitability of next-generation CSP plants, increasing their efficiency is imperative. Ternary carbonate salts are capable of elevating the maximum CSP operating temperature, which results in improved power generation efficiency. However, higher temperatures lead to accelerated corrosion and more severe conditions for structural materials. In this study, nanosecond laser micromachining is investigated as a potential corrosion mitigation technique for molten carbonate salts in dynamic conditions. SS310 samples with laser-induced surface textures are subjected to the flow of molten Li2CO3–K2CO3–Na2CO3 at 600 °C for a period of 600 h. Laser treatment significantly impedes corrosion in SS310, as untreated samples display pitting and scaling, while minimal surface changes are noted on treated samples. Cross-sectional analysis of the samples reveals considerable peeling in the untreated samples and a 45% increase in the corrosion rate compared to the treated samples. The concentrations of Cr and Mg in the salt (determined through ICP analysis) are found to be twofold and fourfold higher than those in treated samples. Laser treatment renders Cr and Mg less accessible to the salt ions, particularly Li, which results in improved corrosion resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Economic viability of concentrated solar power under different regulatory frameworks in Spain10.1016/j.rser.2018.03.017 ↗
2. Effect of SiO2 nanoparticle addition on the wetting and rheological properties of solar salt10.1016/j.solmat.2020.110483 ↗
3. Concentrated solar power (CSP) for sustainable architecture to supply domestic hot water and heating loads of buildings10.1088/1742-6596/2042/1/012110 ↗
4. Molten chloride salts for next generation CSP plants: electrolytical salt purification for reducing corrosive impurity level10.1016/j.solmat.2019.04.021 ↗
5. High-temperature corrosion behavior of superalloys in molten salts–A review10.1080/10408436.2016.1243090 ↗
6. Corrosion behavior of SS316L in ternary Li2CO3–Na2CO3–K2CO3 eutectic mixture salt for concentrated solar power plants10.1016/j.solmat.2020.110679 ↗
7. Corrosion of steel alloys in eutectic NaCl+Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
8. Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power10.1016/j.solmat.2020.110650 ↗
9. Experimental research of high temperature dynamic corrosion characteristic of stainless steels in nitrate eutectic molten salt10.1016/j.solener.2020.09.034 ↗
10. Corrosion of Inconel 601 in molten salts for thermal energy storage10.1016/j.solmat.2017.07.036 ↗
11. Effects of temperature and partial pressure of CO2/O2 on corrosion behaviour of stainless-steel in molten Li/Na carbonate salt10.1016/S0378-7753(00)00376-1 ↗
12. The role of temperature on the corrosion and passivation of type 310S stainless steel in eutectic (Li+K) carbonate melt10.1016/j.jpowsour.2006.04.068 ↗
13. Corrosion behavior of Fe-Cr alloys in Li2CO3-K2CO3 molten carbonate10.1149/1.1955168 ↗
14. Corrosion behaviors of SS310 and IN718 alloys in molten carbonate10.1149/1945-7111/ac436b ↗
15. Corrosion behaviour of high-chromium ferritic steels in molten carbonate in cathode environment10.1016/S0013-4686(01)00471-6 ↗
16. Corrosion behavior of stainless steel and nickel‐base alloys in molten carbonate10.1149/1.2049983 ↗
17. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
18. Electrochemical impedance studies of the initial-stage corrosion of 310S stainless steel beneath thin film of molten (0.62Li, 0.38K)2CO3 at 650 °C10.1016/j.corsci.2010.11.036 ↗
19. Corrosion of 304 stainless steel in carbonates melt– a state of enhanced dissolution of corrosion products10.1016/j.corsci.2020.108535 ↗
20. Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power10.1016/j.rser.2019.109328 ↗
21. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
22. High temperature corrosion beneath carbonate melts of aluminide coatings for CSP application10.1016/j.solmat.2020.110514 ↗
23. The role of alkaline-earth additives on the molten carbonate corrosion of 316L stainless steel10.1016/j.corsci.2007.05.005 ↗
24. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
25. Development of molten nitrate salt based nanofluids for thermal energy storage application: high thermal performance and long storage components life-time10.1063/1.5117740 ↗
26. Unexpected effect of nanoparticles doping on the corrosivity of molten nitrate salt for thermal energy storage10.1016/j.solmat.2018.01.002 ↗
27. Fractal textured surfaces for high temperature corrosion mitigation in molten salts10.1016/j.solmat.2021.111281 ↗
28. Novel textured surfaces for superior corrosion mitigation in molten carbonate salts for concentrating solar power10.1016/j.rser.2022.112961 ↗
29. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications10.1038/s41529-018-0055-0 ↗
30. Inhibiting hot corrosion of molten salt through graphitization of construction materials for concentrated solar power10.1016/j.solmat.2020.110650 ↗
31. Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power
32. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
33. Dynamic corrosion behavior of 316L stainless steel in quaternary nitrate-nitrite salts under different flow rates10.1016/j.solmat.2020.110821 ↗
34. Evaluation of flow accelerated corrosion and mechanical performance of martensitic steel T91 for a ternary mixture of molten salts for CSP plants10.1016/j.solmat.2022.111623 ↗
35. Laser-induced carbonization of stainless steel as a corrosion mitigation strategy for high-temperature molten salts applications10.1016/j.est.2022.105972 ↗
36. Effect of dynamic conditions on high-temperature corrosion of ternary carbonate salt for thermal energy storage applications10.1016/j.solmat.2022.111666 ↗
37. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
38. High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants10.1016/j.surfcoat.2018.05.081 ↗
39. Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy10.1016/j.apsusc.2018.09.012 ↗
40. Influence of ambient conditions on the evolution of wettability properties of an IR-, ns-laser textured aluminium alloy10.1039/C7RA07421B ↗
41. Corrosion behavior and mechanism of austenitic stainless steels in a new quaternary molten salt for concentrating solar power10.1016/j.solmat.2019.01.024 ↗
42. Corrosion behavior of pure Cr, Ni, and Fe exposed to molten salts at high temperature10.1155/2014/923271 ↗
43. Corrosion of 304 stainless steel in molten-carbonate fuel cells10.1149/1.1391963 ↗
44. Corrosion behavior of Fe-Cr alloys in Li[sub 2]CO[sub 3]-K[sub 2]CO[sub 3] molten carbonate10.1149/1.1955168 ↗
45. Chung · 1999 · 647
46. Self-diffusion in austenitic Fe-Cr-Ni alloys10.1088/0305-4608/10/3/009 ↗
47. Thermal spray coatings for hot corrosion resistance
48. Stability of protective oxide films in waste incineration environment - solubility measurement of oxides in molten chlorides10.1016/S0010-938X(01)00059-2 ↗
49. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
50. Corrosion behaviour of austenitic stainless steels in carbonate melt at 923 K under controlled CO2-O2 environment10.1016/j.corsci.2018.01.031 ↗
51. Graphene on metal surfaces10.1016/j.susc.2008.08.037 ↗
52. Decomposition of hydrocarbons to hydrogen and carbon10.1016/j.apcata.2009.02.038 ↗
53. Preparation and characterization of iron manganese carbide by reaction of the oxides and carbon in nitrogen10.1006/jssc.1994.1169 ↗
54. Kietzig · 2009
55. Graphitization as efficient inhibitor of the carbon steel corrosion by molten binary nitrate salt for thermal energy storage at concentrated solar power10.1016/j.solmat.2019.110172 ↗
56. Farelas · 2013
57. Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants10.1016/j.solmat.2018.12.028 ↗
58. Corrosion of stainless steels and low-Cr steel in molten Ca(NO3)2–NaNO3–KNO3 eutectic salt for direct energy storage in CSP plants10.1016/j.solmat.2015.05.004 ↗
59. Thermal influence in corrosion properties of Chilean solar nitrates10.1016/j.solener.2014.07.027 ↗
60. Acceleration of thermal decomposition of molten nitrates by Cr in steel and promotion of this effect by halogens
61. Laser-induced carbonization of stainless steel as a corrosion mitigation strategy for high-temperature molten salts applications10.1016/j.est.2022.105972 ↗