Observations of contact resistance in TOPCon and PERC solar cells
Source abstract
Abstract
In this article we investigate the observation of increased contact resistance in both PERC and TOPCon solar cells linked to hydrogen dynamics at the interface. We study the changes in series resistance (RS) as a result of applied forward and reverse bias in the temperature range from 350 °C–400 °C. In PERC cells, we use a modified geometry to isolate the root cause of the increased RS by isolating the current path through the different parts of the cell. We show that contact resistance in PERC cells occurs between the Ag contact and the n + silicon region at the front surface. We also report the first observation of increased contact resistance in industrial n-type TOPCon solar cells, likely linked to H dynamics. For both PERC and TOPCon cells, we show that the temperature of the measurement has a profound impact on the amount of contact resistance. However, the response of the two cell architectures under varied biasing conditions is not identical. TLM measurements reveal that in TOPCon cells the increased RS is caused by the Ag contact to the n + polysilicon region, which, unlike in PERC cells, corresponds to the rear surface, away from the p-n junction. Recent results have shown that severe surface-related degradation in TOPCon solar cells can be mitigated by annealing treatments at temperatures similar to those explored herein. Therefore, identifying contact resistance in TOPCon cells may have a profound impact on further studies exploring degradation mitigation pathways in TOPCon cells.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. The path to 25% silicon solar cell efficiency: history of silicon cell evolution10.1002/pip.892 ↗
2. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept—a review10.1109/JPHOTOV.2016.2571627 ↗
3. Review of advanced hydrogen passivation for high efficient crystalline silicon solar cells10.1016/j.mssp.2018.01.019 ↗
4. The role of hydrogenation and gettering in enhancing the efficiency of next-generation Si solar cells: an industrial perspective
5. Dielectric surface passivation for silicon solar cells: a review
6. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
7. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
8. Silicon solar cells with passivating contacts: classification and performance
9. Overcoming the challenges of hydrogenation in silicon solar cells10.1071/CH18271 ↗
10. Progress with defect engineering in silicon heterojunction solar cells10.1002/pssr.202100170 ↗
11. Influence of defect type on hydrogen passivation efficacy in multicrystalline silicon solar cells10.1002/pip.1008 ↗
12. Influence of hydrogen on the regeneration of boron-oxygen related defects in crystalline silicon10.1063/1.4804310 ↗
13. Hydrogen-induced degradation: explaining the mechanism behind light- and elevated temperature-induced degradation in n- and p-type silicon10.1016/j.solmat.2019.110353 ↗
14. Development of advanced hydrogenation processes for silicon solar cells via an improved understanding of the behaviour of hydrogen in silicon10.1002/pip.3240 ↗
15. Temporary recovery of the defect responsible for light- and elevated temperature-induced degradation: insights into the physical mechanisms behind LeTID10.1109/JPHOTOV.2020.3025240 ↗
16. Kinetics of the light and elevated temperature induced degradation and regeneration of Quasi-Monocrystalline silicon solar cells10.1109/JPHOTOV.2021.3066239 ↗
17. Light- and elevated-temperature-induced degradation-affected silicon cells from a utility-scale photovoltaic system characterized by deep-level transient spectroscopy10.1109/JPHOTOV.2022.3158545 ↗
18. Progress in the understanding of light- and elevated temperature-induced degradation in silicon solar cells: a review10.1002/pip.3362 ↗
19. On the defect physics behind light and elevated temperature-induced degradation (LeTID) of multicrystalline silicon solar cells10.1109/JPHOTOV.2019.2937223 ↗
20. Degradation of multicrystalline silicon solar cells and modules after illumination at elevated temperature10.1016/j.solmat.2015.06.015 ↗
21. Impact of hydrogen-rich silicon nitride material properties on light-induced lifetime degradation in multicrystalline silicon10.1002/pssr.201900201 ↗
22. A case study on accelerated light- and elevated temperature-induced degradation testing of commercial multi-crystalline silicon passivated emitter and rear cell modules10.1002/pip.3455 ↗
23. Impact of the firing temperature profile on light induced degradation of multicrystalline silicon10.1002/pssr.201600272 ↗
24. Evaluating the impact of SiNx thickness on lifetime degradation in silicon10.1109/JPHOTOV.2019.2896671 ↗
25. Eliminating light- and elevated temperature-induced degradation in P-type PERC solar cells by a two-step thermal process10.1016/j.solmat.2020.110470 ↗
26. Low-temperature dark anneal as pre-treatment for LeTID in multicrystalline silicon10.1016/j.solmat.2018.12.021 ↗
27. Current transport through lead–borosilicate interfacial glass layers at the screen–printed silver-silicon front contact10.1109/JPHOTOV.2015.2409561 ↗
28. Instability of increased contact resistance in silicon solar cells following post-firing thermal processes10.1002/solr.201700129 ↗
29. Hydrogen induced contact resistance in PERC solar cells10.1016/j.solmat.2018.04.036 ↗
30. Hydrogen in silicon: a discussion of diffusion and passivation mechanisms10.1016/0927-0248(95)00098-4 ↗
31. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
32. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
33. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
34. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
35. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
36. 24.58% efficient commercial n-type silicon solar cells with hydrogenation10.1002/pip.3464 ↗
37. Effect of carrier-induced hydrogenation on the passivation of the poly-Si/SiOx/c-Si interface10.1063/1.5049289 ↗
38. Degradation and regeneration of n+-doped poly-Si surface passivation on p-type and n-type cz-Si under illumination and dark annealing10.1109/JPHOTOV.2020.2964987 ↗
39. Firing stability of phosphorus-doped polysilicon passivating contacts: factors affecting the degradation behavior10.1016/j.solmat.2021.111407 ↗
40. Investigating the degradation behaviours of n+-doped Poly-Si passivation layers: an outlook on long-term stability and accelerated recovery10.1016/j.solmat.2021.111491 ↗
41. Thermal processes and their impact on surface-related degradation10.1002/pssr.202100464 ↗
42. Contact resistance and Schottky barriers
43. Suppression of LeTID in P type multi crystalline PERC silicon solar cells by biased annealing process