Oil-in-Oil emulsions of stearic acid dispersed in silicone oil with enhanced energy storage capability for heat transfer fluids
Source abstract
Abstract
Non-aqueous phase change emulsions are very unknown and promising multifunctional fluids consisting of phase change materials dispersed in carrier fluids, both being oily phases. The oil-in-oil phase change emulsions allow the possibility of using the same medium for latent heat storage and transport under more extreme pressure and temperature conditions. In this paper, stable emulsions composed of stearic acid with a melting point of 68–71 °C dispersed in silicone oil have been developed. Stearic acid-in-silicone oil emulsion samples with different phase concentrations were evaluated by analysing their thermophysical properties , viscous and viscoelastic behaviour and microstructure. Emulsion properties below the melting point of the phase change material were greatly influenced by the concentration of the disperse phase. Thus, as the temperature lowered, a well-developed three-dimensional network of stearic acid crystalline structures interconnected with each other was formed. Furthermore, emulsion physicochemical and thermal stabilities were examined and proved under several mechanical–thermal cycles, withstanding more than 100 cycles in the calorimeter . The results indicate that stearic acid-in-silicone oil emulsions are an attractive candidate for energy storage applications with a phase change enthalpy in emulsions with the 10 wt% of phase change material of 22.32 J/g.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Polymer composites and self-healing · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Components. Thermal energy storage
2. Perspectives on thermal energy storage research10.1016/j.energy.2021.120943 ↗
3. A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges10.1016/j.apenergy.2018.03.005 ↗
4. A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility10.1016/j.enconman.2016.02.045 ↗
5. Solar energy storage using phase change materials10.1016/j.rser.2006.05.005 ↗
6. Review of the application of phase change material for heating and domestic hot water systems10.1016/j.rser.2014.09.034 ↗
7. Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules10.1016/j.rser.2013.12.017 ↗
8. Review on heat transfer enhancement of phase change materials (PCMs)10.1016/j.matpr.2018.03.028 ↗
9. State of the art on phase change material slurries10.1016/j.enconman.2012.07.004 ↗
10. Development and characterization of novel and stable silicon nanoparticles-embedded PCM-in-water emulsions for thermal energy storage10.1016/j.apenergy.2019.01.159 ↗
11. A comprehensive review on phase change material emulsions: fabrication, characteristics, and heat transfer performance10.1016/j.solmat.2018.11.016 ↗
12. Low temperature paraffin phase change emulsions10.1016/j.ijrefrig.2010.05.016 ↗
13. Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications10.1016/j.energy.2009.03.016 ↗
14. Thermophysical properties of phase change emulsions prepared by D-phase emulsification10.1016/j.enconman.2016.05.065 ↗
15. Non-aqueous olive oil-in-glycerin (o/o) Pickering emulsions: preparation, characterization and in vitro aspirin release10.1080/01932691.2017.1406368 ↗
16. Formulation of oil in oil emulsions: potential drug reservoirs for slow release10.1016/S1773-2247(04)50022-9 ↗
17. Influence of freezing rate variation on the microstructure and physicochemical properties of food emulsions10.1016/j.jfoodeng.2013.05.034 ↗
18. A rheological analysis of structured water-in-olive oil emulsions10.1016/j.jfoodeng.2011.07.013 ↗
19. Formulation and processing of novel non-aqueous polyethylene glycol-in-silicone oil (o/o) phase change emulsions10.1016/j.solmat.2020.110898 ↗
20. Role of crystallinity on the thermal and viscous behaviour of polyethylene glycol-in-silicone oil (o/o) phase change emulsions10.1016/j.jiec.2021.08.003 ↗
21. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
22. Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery10.1016/j.renene.2018.05.009 ↗
23. Development of solar thermal technologies in China10.1016/j.energy.2009.04.005 ↗
24. Stearic acid as phase change material: thermal reliability test and compatibility with some construction materials
25. Modification of physical and thermal characteristics of stearic acid as a phase change materials using TiO2-nanoparticles10.1016/j.tca.2019.02.015 ↗
26. A novel composite Phase change material of Stearic Acid/Carbonized sunflower straw for thermal energy storage10.1016/j.matlet.2017.12.008 ↗
27. Silicone emulsions10.1016/j.cis.2006.11.023 ↗
28. Preparation and characterization of nano-sized phase change emulsions as thermal energy storage and transport media10.1016/j.apenergy.2017.01.012 ↗
29. Emulsion stabilizing capacity of intact starch granules modified by heat treatment or octenyl succinic anhydride10.1002/fsn3.17 ↗
30. Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications10.1016/S0196-8904(02)00251-0 ↗
31. Preparation of phase change material emulsions with good stability and little supercooling by using a mixed polymeric emulsifier for thermal energy storage10.1016/j.solmat.2017.10.025 ↗
32. PCM-in-water emulsion for solar thermal applications: the effects of emulsifiers and emulsification conditions on thermal performance, stability and rheology characteristics10.1016/j.solmat.2015.12.022 ↗
33. Galactitol hexa stearate and galactitol hexa palmitate as novel solid–liquid phase change materials for thermal energy storage10.1016/j.solener.2011.05.014 ↗
34. Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media10.1016/j.energy.2016.04.021 ↗
35. Thermal properties and convective heat transfer of phase changing paraffin nanofluids10.1016/j.ijthermalsci.2017.03.024 ↗
36. 26 - shear-thinning lamellar gel network emulsions as delivery systems
37. Binks · 1998
38. Inamuddin, Thermal energy storage and thermal conductivity properties of fatty acid/fatty acid-grafted-CNTs and fatty acid/CNTs as novel composite phase change materials10.1038/s41598-020-71891-1 ↗
39. Effect of phase change on the rheology and stability of paraffin wax-in-water Pickering emulsions10.1007/s00397-017-1021-4 ↗
40. Emulsions under shear—the formation and properties of partially coalesced lipid structures10.1016/S0268-005X(01)00057-1 ↗
41. Viscoelastic characterization of multifunctional composites incorporated with microencapsulated phase change materials10.1016/j.matpr.2017.05.033 ↗
42. Exploration of the natural waxes-tuned crystallization behavior, droplet shape and rheology properties of O/W emulsions10.1016/j.jcis.2020.12.024 ↗
43. Correlation of rheology and light scattering in isotactic polypropylene during early stages of crystallization10.1021/ma980737x ↗
44. Rheology and structure of isotactic polypropylene near the gel point: quiescent and shear-induced crystallization10.1016/S0032-3861(01)00402-5 ↗
45. Ultra-drawing of low molecular weight polyethylene — ultra-high molecular weight polyethylene blend films prepared by gelation/crystallization from semi-dilute solutions10.1016/S0032-3861(01)00302-0 ↗
46. Rheological and rheo-SALS investigation of the multi-lamellar vesicle formation in the C12E3/D2O system10.1016/j.jcis.2011.10.057 ↗
47. Effect of droplet size on the rheology of emulsions10.1002/aic.690421119 ↗
48. Chapter 17 - rheology of emulsions
49. Shear viscosity behavior of emulsions of two immiscible liquids10.1006/jcis.2000.6776 ↗
50. Schramm · 2006
51. Interplay between bulk aggregates, surface properties and foam stability of nonionic surfactants10.1016/j.cis.2022.102618 ↗
52. Steffe · 1996
53. Experimental study of grease flow in pipelines: wall slip and air entrainment effects10.1016/j.cep.2004.09.003 ↗
54. Crystallization of polyethylene under shear flow as studied by time resolved depolarized light scattering. Effects of shear rate and shear strain10.1016/j.polymer.2004.12.048 ↗
55. Flow and heat transfer characteristics of phase change emulsions in a circular tube: Part 1. Laminar flow10.1016/j.ijheatmasstransfer.2017.10.055 ↗
56. Development of a novel phase change material emulsion for cooling systems10.1016/j.renene.2015.10.050 ↗
57. Towards a phenomenological definition of the term ‘gel10.1016/0966-7822(93)90020-I ↗
58. Evaluation of different methods for the determination of the plateau modulus and the entanglement molecular weight10.1016/j.polymer.2006.04.054 ↗
59. Research on viscoelastic properties of water in waxy crude oil emulsion gels with the effect of droplet size and distribution10.1002/cjce.22324 ↗
60. Stabilization mechanism of water-in-oil emulsions by medium- and long-chain diacylglycerol: post-crystallization vs. pre-crystallization10.1016/j.lwt.2021.111649 ↗
61. Effect of nano-silica and silicone oil paraffin emulsion composite waterproofing agent on the water resistance of flue gas desulfurization gypsum10.1016/j.conbuildmat.2021.123055 ↗
62. Development of lecithin and stearic acid based oleogels and oleogel emulsions for edible semisolid applications10.1016/j.foodres.2018.12.021 ↗
63. Crystallization in emulsions10.1016/S1359-0294(02)00080-8 ↗
64. On the mechanism of drop self-shaping in cooled emulsions10.1021/acs.langmuir.6b01626 ↗
65. How faceted liquid droplets grow tails10.1073/pnas.1515614113 ↗
66. Kinetics of crystallization in polydisperse emulsions10.1006/jcis.1998.5760 ↗