journal article·2022-06

A novel laser scribing method combined with the thermal stress cleaving for the crystalline silicon solar cell separation in mass production

Han Han, Xubo Jia, Chao Ma, Yelong Wu

Publisher page

Abstract

Nowadays as the wafer sizes of the crystalline silicon solar cells get larger and larger, separating the cells becomes an essential step. However, in mass production, there is still lack of a low scribing loss and broad compatible cell separation method. In this work, a systematic investigation was conducted on the crystalline silicon solar cell separation processes, including the laser scribing and the cleaving process. Firstly, by combining a 1/4 beam splitter with the laser head, we developed a new laser scribing process, which can achieve a smaller groove width-to-depth ratio (24%) with narrower heat affected area (total width of 30 μm) compared to traditional laser optical systems. Then, we explored the minimum required scribing depths for separating four typical crystalline silicon cells by applying the thermal stress cleaving process. The Czochralski-grown substrates need only point scribing at the beginning and the end of the separating path, but if there is a metal electrode in the separation path, the scribing depth has to be about 20% of the cell thickness. At last, we analyzed the electrical and mechanical strength losses caused by different separation processes. The 20% scribing depth may cause about 30% rel mechanical strength loss. It is proved that combining this new scribing method with the thermal stress cleaving is an economical separation solution with less laser scribing loss and better compatibility for different cells. Our results would shed some light on future separating and module design efforts of solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Solar module with half size solar cells
2. Hanifi · 2015
3. Malik · 2014
4. Resistive power loss analysis of PV modules made from halved 15.6 × 15.6 cm2 silicon PERC solar cells with efficiencies up to 20.010.1109/JPHOTOV.2014.2367868 ↗
5. Mittag · 2017 · vol. 25
6. Shingled cell interconnection: a new generation of bifacial PV-modules10.2139/ssrn.3152478 ↗
7. Shingling technology for cell interconnection: technological aspects and process integration10.1016/j.egypro.2018.09.010 ↗
8. Thermal laser separation for wafer dicing
9. Enhancements in resizing single crystalline silicon wafers up to 450 mm by using thermal laser separation
10. TLS-Dicing - an innovative alternative to known technologies
11. High quality half-cell processing using thermal laser separation10.1016/j.egypro.2015.07.048 ↗
12. Influence of laser cutting conditions on electrical characteristics of half-size bifacial silicon solar cells10.1016/j.mssp.2019.104747 ↗
13. Oswald · 2013
14. Technological advances in a-Si: H/c-Si Heterojunction solar cells
15. Laser marking of solar cells: technologies and potential
16. Recent applications of pulsed lasers in advanced materials processing,” Thin Solid Films, vol. 453–454, pp. 450–457, Apr. 2004, doi: 10.1016/j.tsf.2003.11.130.10.1016/j.tsf.2003.11.130 ↗
17. Fracture mechanics-based analysis for hybrid laser/waterjet (LWJ) machining of yttria-partially stabilized zirconia (Y-PSZ)10.1016/j.ijmachtools.2009.09.002 ↗
18. Bernhard · 2016 · 839
19. Bow of silicon wafers after in-line high-rate evaporation of aluminum10.1109/JPHOTOV.2012.2218578 ↗
20. Bow in screen-printed back-contact industrial silicon solar cells10.1016/j.solmat.2007.04.010 ↗
21. Kaule · 2015 · 716
22. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
23. Glunz · 2017 · 853
24. Wöhrle · 2017 · 5
25. Thermal laser separation of PERC and SHJ solar cells
26. Low cost high energy yield solar module lines and its applications
27. Postmetallization ‘passivated edge technology’ for separated silicon solar cells
28. Bifacial shingle solar cells on p-type Cz-Si (pSPEER)10.1063/1.5049311 ↗