Microporous foam, magnetic nanoparticles, and revolutionary tubes: Sophisticated combination of three solar energy materials in flat plate solar collectors
Source abstract
Abstract
Abstract A novel and cost-effective method is employed to obviate conventional shortages of plate solar collectors by utilizing revolutionary tubes, microporous metal foam, and nanoparticles. In the new design, a thin metal foam is attached inside the tubes as a porous fin to increase the heat transfer area near the surface. Then, as the nanofluid passes through the tube, the rotation of the tube circulates the nanofluid and pushes it toward the porous fin by centrifugal force. This combined technique improves both convection and conduction mechanisms in the tubes and causes more thermal energy storage. Besides, the proposed method requires less pumping power because centrifugal force supplies part of the momentum for transport in the porous fin. Results reveal that 50.68% of the lost energy is managed and restored using the new method in the collector. In other words, 413 W more energy storage is achieved by the equipped solar collector compared to the simple one. Also, energy and exergy efficiencies rise by 22.8% and 8.5% in the manipulated system. Results confirm that the consuming power for pumping the nanofluid and rotating the tubes can be supplied by the system itself.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Nanofluid Flow and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Close supercritical versus inverse Brayton cycles for power supply
2. Chapter 7 - energy storage systems
3. Chen · A flexible dual‐ion battery based on PVDF‐HFP‐modified gel polymer electrolyte with excellent cycling performance and superior rate capability · 2018 · 8 · 1801219
4. Jiang · A Multi‐Ion Strategy towards Rechargeable Sodium‐Ion Full Batteries with High Working Voltage and Rate Capability · 2018 · 130 · 16608
5. Qin · Bubble‐sheet‐like interface design with an ultrastable solid electrolyte layer for high‐performance dual‐ion batteries · 2017 · 29 · 1606805
6. Thermal and exergetic performance enhancement of basic dual-loop combined cooling and power cycle driven by solar energy10.1016/j.tsep.2020.100556 ↗
7. Effect analysis on energetic, exergetic and financial performance of a flat plate collector with heat pipes10.1016/j.enconman.2019.04.081 ↗
8. Experimental analysis of solar air collector with PCM-honeycomb combination under the natural convection10.1016/j.solmat.2019.02.040 ↗
9. Nano-encapsulated PCM emulsions prepared by a solvent-assisted method for solar applications10.1016/j.solmat.2019.02.021 ↗
10. Preparation of reduced graphene oxide modified magnetic phase change microcapsules and their application in direct absorption solar collector10.1016/j.solmat.2020.110695 ↗
11. Multifunctional HDPE/CNTs/PW composite phase change materials with excellent thermal and electrical conductivities10.1016/j.jmst.2021.02.009 ↗
12. Frost and High-temperature resistance performance of a novel dual-phase change material flat plate solar collector10.1016/j.solmat.2019.110086 ↗
13. Numerical and experimental study on optimization of CPU system cooled by nanofluids10.1016/j.csite.2021.100848 ↗
14. Natural convection of nanofluids in solar energy collectors based on a two-phase lattice Boltzmann model
15. Photothermal efficiency enhancement of a nanofluid-based direct absorption solar collector utilizing magnetic nano-rotor10.1016/j.enconman.2019.111996 ↗
16. Highly efficient energy harvest via external rotating magnetic field for oil based nanofluid direct absorption solar collector10.1016/j.gee.2020.03.014 ↗
17. Liquid metals dealloying as a general approach for the selective extraction of metals and the fabrication of nanoporous metals: a review10.1016/j.mtcomm.2020.102007 ↗
18. Effects of metal foam on exergy and entropy of nanofluids in a heat sink applied for thermal management of electronic components10.1002/er.5703 ↗
19. Experimental comparison of optical properties of nanofluid and metal foam for using in direct absorption solar collectors10.1016/j.solmat.2019.01.050 ↗
20. A facile one-step method to fabricate multi-scaled solar selective absorber with nano-composite and controllable micro-porous texture10.1016/j.solmat.2017.01.027 ↗
21. Performance improvements in solar flat plate collectors by integrating with phase change materials and fins: a CFD modeling10.1016/j.energy.2019.116719 ↗
22. Effectiveness analysis of solar flat plate collector with Al2O3 water nanofluids and with longitudinal strip inserts10.1016/j.ijheatmasstransfer.2018.08.025 ↗
23. Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid10.1016/j.renene.2019.08.081 ↗
24. Energy and exergy analysis of a thermosiphon and forced-circulation flat-plate solar collector using MWCNT/Water nanofluid10.1016/j.csite.2019.100416 ↗
25. Thermodynamic evaluation and optimization of a flat plate collector operating with alumina and iron mono and hybrid nanofluids10.1016/j.seta.2020.100636 ↗
26. Energy and exergy comparison of a flat-plate solar collector using water, Al2O3 nanofluid, and CuO nanofluid10.1016/j.applthermaleng.2019.113959 ↗
27. Anirudh · 2021
28. Performance evaluation of a flat-plate solar collector filled with porous metal foam: experimental and numerical analysis10.1016/j.enconman.2017.09.072 ↗
29. Performance assessment of flat-plate solar collector with internal fins and porous media through an integrated approach of CFD and experimentation10.1016/j.ijthermalsci.2021.106932 ↗
30. Convective heat transfer enhancement in a double pipe mini heat exchanger by magnetic field induced swirling flow10.1016/j.applthermaleng.2019.114801 ↗
31. Heat transfer enhancement of a fin-and-tube compact heat exchanger by employing magnetite ferrofluid flow and an external magnetic field10.1016/j.applthermaleng.2019.114462 ↗
32. Magnetic-induced nanoparticles and rotary tubes for energetic and exergetic performance improvement of compact heat exchangers10.1016/j.powtec.2020.09.010 ↗
33. Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone–butanol–ethanol/diesel blend fuels10.1016/j.energy.2021.121069 ↗
34. Numerical study on swirl cooling flow, heat transfer and stress characteristics based on fluid-structure coupling method under different swirl chamber heights and Reynolds numbers10.1016/j.ijheatmasstransfer.2021.121228 ↗
35. Influence of mach number of main flow on film cooling characteristics under supersonic condition10.3390/sym13010127 ↗
36. Soft computing analysis of thermohydraulic enhancement using twisted tapes in a flat-plate solar collector: sensitivity analysis and multi-objective optimization10.1016/j.jclepro.2021.127947 ↗
37. Simultaneous energy storage enhancement and pressure drop reduction in flat plate solar collectors using rotary pipes with nanofluid10.1016/j.enbuild.2021.110855 ↗
38. Design and evaluation of flat plate solar collector equipped with nanofluid, rotary tube, and magnetic field inducer in a cold region10.1016/j.renene.2021.02.001 ↗
39. Efficiency, energy and economic analysis of twisted tape inserts in a thermosyphon solar flat plate collector with Cu nanofluids10.1016/j.ref.2020.06.004 ↗
40. Cao · 2021
41. A comparative numerical study on natural convection in inclined wavy and flat-plate solar collectors10.1016/j.buildenv.2007.09.002 ↗
42. Performance comparison of innovative spiral shaped solar collector design with conventional flat plate solar collector10.1016/j.energy.2019.116853 ↗
43. Bezaatpour · 2021 · 110855
44. Three dimensional simulation of hydrodynamic and heat transfer behavior of magnetite nanofluid flow in circular and rectangular channel heat sinks filled with porous media10.1016/j.powtec.2018.11.104 ↗
45. Effect of magnetic field on the hydrodynamic and heat transfer of magnetite ferrofluid flow in a porous fin heat sink10.1016/j.jmmm.2019.01.028 ↗
46. A novel heat sink design for simultaneous heat transfer enhancement and pressure drop reduction utilizing porous fins and magnetite ferrofluid10.1108/HFF-12-2018-0810 ↗
47. Tailoring permeability of microporous copper structures through template sintering10.1021/acsami.8b03774 ↗
48. Hybridization of rotary absorber tube and magnetic field inducer with nanofluid for performance enhancement of parabolic trough solar collector10.1016/j.jclepro.2020.124565 ↗
49. An intuitive framework for optimizing energetic and exergetic performances of parabolic trough solar collectors operating with nanofluids10.1016/j.renene.2020.04.160 ↗
50. Energetic and exergetic performance enhancement of heat exchangers via simultaneous use of nanofluid and magnetic swirling flow: a two-phase approach10.1016/j.tsep.2020.100706 ↗
51. Thermal efficiency enhancement of direct absorption parabolic trough solar collector (DAPTSC) by using nanofluid and metal foam10.1016/j.energy.2019.116662 ↗
52. Experimental investigation of thermal performance and entropy generation of a flat-plate solar collector filled with porous media10.1016/j.applthermaleng.2017.08.170 ↗