Mitigation of J–V distortion in CdTe solar cells by Ga-doping of MgZnO emitter
Source abstract
Abstract
Abstract Distortions in the current–voltage curves of CdTe-based thin-film solar cells with MgZnO emitter layers are not uncommon. Even when such distortions are very subtle with standard sunlight, they can be greatly accentuated by the removal of short-wavelength photons with optical filters, and the dark-curve turn-on voltage can be noticeably increased. The strong suggestion is that good J–V curves with full-spectrum light often rely on photogeneration of electrons from trap states in the MgZnO emitter. When the carrier concentration of the CdTe absorber is increased with external doping, there is a corresponding need for a larger MgZnO carrier concentration. Based on the assumption that the emitter carrier concentration needs to be comparable to that of the absorber, Ga-doping of the MgZnO was shown to very nearly eliminate the large filtered-light distortions and is arguably superior to MgZnO that relies on photogeneration. In addition, it was shown that photogeneration and recovery in MgZnO is relatively slow, so that without Ga-doping, the cell efficiency improves gradually for most of an hour in the light, and the turn-on voltage of the dark curve increases on a similar time scale when the light is removed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
2. 2021, https://www.nrel.gov/pv/cell-efficiency.html. (Accessed 01 May 2021).
3. Band alignment of front contact layers for high-efficiency CdTe solar cells10.1016/j.solmat.2016.05.050 ↗
4. Stable magnesium zinc oxide by reactive co-sputtering for CdTe-based solar cells10.1016/j.solmat.2020.110521 ↗
5. Tailoring MgZnO/CdSeTe interfaces for photovoltaics10.1109/JPHOTOV.2018.2877982 ↗
6. Eliminating s-kink to maximize the performance of MgZnO/CdTe solar cells10.1021/acsaem.9b00233 ↗
7. R. Pandey, A. Munshi, T. Shimpi, A. Shah, A. Bothwell, D. Kuciauskas, J.R. Sites, CdTe-based solar cells with variation in the Mg concentration of the MgZnO emitter, Solar RRL.
8. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
9. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
10. Interface modification to enhance electron extraction by deposition of a ZnMgO buffer on SnO2-coated FTO in CdTe solar cells10.1016/j.solener.2018.11.053 ↗
11. Structural and electronic properties of CdTe1-xSex films and their application in solar cells10.1080/14686996.2018.1497403 ↗
12. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
13. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
14. Co-sublimation of CdSexTe1-x layers for CdTe solar cells10.1016/j.solmat.2016.09.025 ↗
15. Structural and compositional dependence of the CdTexSe1-x alloy layer photoactivity in CdTe-based solar cells
16. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
17. Atomistic modeling of energy band alignment in CdSeTe surfaces10.1016/j.apsusc.2020.148762 ↗
18. Understanding the co-passivation effect of Cl and se for CdTe grain boundaries10.1021/acsami.1c06587 ↗
19. CdTe solar cells with open-circuit voltage breaking the 1 V barrier10.1038/nenergy.2016.15 ↗
20. Monocrystalline CdTe solar cells with open-circuit voltage over 1 V and efficiency of 17%10.1038/nenergy.2016.67 ↗
21. Overcoming carrier concentration limits in polycrystalline CdTe thin films with in situ doping10.1038/s41598-018-32746-y ↗
22. Impact of carrier concentration and carrier lifetime on MgZnO/CdSeTe/CdTe solar cells
23. Microsecond carrier lifetimes in polycrystalline cdsete heterostructures and in CdSeTe thin film solar cells
24. Interface engineering for 25% CdTe solar cells
25. Gallium-doped magnesium zinc oxide (GMZO) transparent conducting oxide layers for CdTe thin-film photovoltaics
26. Combinatorial sputtering of Ga-doped (Zn, Mg) O for contact applications in solar cells10.1016/j.solmat.2016.09.003 ↗
27. Tailoring SnO2,(Mg, Zn) O, and Ga:(Mg, Zn) O electro-optical properties and stability for solar cells10.1088/1361-6463/abb901 ↗
28. Controlling conduction band alignment and carrier concentration in gallium-doped magnesium zinc oxide by reactive cosputtering10.1116/6.0000784 ↗
29. Sputter-deposited oxides for interface passivation of CdTe photovoltaics10.1109/JPHOTOV.2017.2787021 ↗
30. Single vacuum chamber with multiple close space sublimation sources to fabricate CdTe solar cells10.1116/1.4941071 ↗
31. Blue-photon modification of nonstandard diode barrier in CuInSe2 solar cells10.1016/S0927-0248(98)00035-X ↗
32. Light induced changes in the electrical behavior of CdTe and Cu (In, Ga) Se2 solar cells10.1016/S0040-6090(01)01507-3 ↗
33. Behavior of photocarriers in the light-induced metastable state in the p-n heterojunction of a Cu (In, Ga) Se2 solar cell with CBD-ZnS buffer layer10.1021/acsami.6b05005 ↗
34. CIGS J–V distortion in the absence of blue photons10.1016/j.tsf.2004.11.099 ↗
35. Exchange current density model for the contact-determined current-voltage behavior of solar cells10.1063/1.5090519 ↗
36. Numerical simulation of thin film solar cells: practical exercises with SCAPS