journal article·2020-11

Front side metallization of silicon solar cells – A high-speed video imaging analysis of the screen printing process

Karim Abdel Aal, Norbert Willenbacher

Publisher page

Abstract

Abstract Aiming at higher cell efficiency and lower Ag consumption, research focuses on achieving smaller finger lines for silicon solar cell front side metallization. In-depth understanding of the printing process is mandatory to achieve uniform, defect free lines with high aspect ratio. An innovative high-speed video imaging setup allows for tracking of the mechanisms happening within ≈10–50 ms during the screen printing process. Two pastes differing significantly with respect to their rheological as well as wetting properties are used in this study. A paste spreading mechanism consisting of different consecutive process steps determines the final line shape. During nip contact the paste is squeezed between screen emulsion and substrate. Paste spreading further proceeds as long as the screen clings to the substrate, it occurs in a regular pattern and is most pronounced in the regions were mesh wires approach the emulsion surface. Then sudden retraction takes place during snap-off and the final line width is essentially fixed. Spreading is more pronounced for the paste exhibiting low viscosity at high shear rates and strong wetting of screen emulsion and substrate. The overall paste transfer is promoted by poor screen wetting and strong paste cohesion. These insights will stimulate further improvement of Ag paste formulation for solar cell metallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. International Renewable Energy Agency · 2020
2. Fraunhofer · 2020 · vol. 98
3. Philipps · 2020
4. Taylor · 2020
5. Silver as a constraint for a large-scale development of solar photovoltaics? Scenario-making to the year 2050 supported by expert engagement and global sensitivity analysis10.3389/fenrg.2019.00056 ↗
6. “Project finale” - screen and screen printing process development for ultra-fineline contacts below 20μm finger width
7. A study of shading and resistive loss from the fingers of encapsulated solar cells10.1016/S0927-0248(99)00024-0 ↗
8. Rheology and screen-printing performance of model silver pastes for metallization of Si-solar cells10.3390/coatings8110406 ↗
9. Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells10.1016/j.solmat.2009.01.003 ↗
10. A new environmental friendly silver front contact paste for crystalline silicon solar cells10.1016/j.jallcom.2012.09.080 ↗
11. How rheological properties affect fine-line screen printing of pastes: a combined rheological and high-speed video imaging study10.1007/s11998-018-0091-2 ↗
12. Effects of organic medium on rheological properties of silver pastes for crystalline silicon solar cells10.1108/CW-07-2015-0032 ↗
13. Non-volatile free silver paste formulation for front-side metallization of silicon solar cells10.1016/j.solmat.2019.110040 ↗
14. Capillary forces in suspension rheology10.1126/science.1199243 ↗
15. Structure of particle networks in capillary suspensions with wetting and nonwetting fluids10.1021/acs.langmuir.5b04246 ↗
16. Current opinion in colloid & interface science capillary suspensions : particle networks formed through the capillary force10.1016/j.cocis.2014.10.004 ↗
17. Influence of particle shape on the rheological behavior of three-phase non-brownian suspensions10.1016/j.colsurfa.2016.03.006 ↗
18. Highly conductive, printable pastes from capillary suspensions10.1038/srep31367 ↗
19. Improving wall slip behavior of silver pastes on screen emulsions for fine line screen printing10.1016/j.solmat.2019.109969 ↗
20. Impact of wall slip on screen printing of front-side silver pastes for silicon solar cells10.1109/JPHOTOV.2016.2626147 ↗
21. Studying knotless screen patterns for fine-line screen printing of Si-solar cells10.1109/JPHOTOV.2019.2959939 ↗
22. Optimization of fine line screen printing using in-depth screen mesh analysis
23. Influence of silver paste rheology and screen parameters on the front side metallization of silicon solar cell10.1016/j.mssp.2014.08.023 ↗
24. High-speed imaging the effect of snap-off distance and squeegee speed on the ink transfer mechanism of screen-printed carbon pastes
25. Non-volatile free silver paste formulation for front-side metallization of silicon solar cells, present. 8th work
26. Schneider · 2018
27. Challenges in rheological characterization of highly concentrated suspensions - a case study for screen-printing silver pastes
28. The vane‐in‐cup as a novel rheometer geometry for shear thinning and thixotropic materials10.1122/1.550103 ↗
29. On different ways of measuring “the” yield stress10.1016/j.jnnfm.2016.11.001 ↗
30. European Committee for Standardization · 2010
31. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗