How cell textures impact angular cell-to-module ratios and the annual yield of crystalline solar modules
Source abstract
Abstract
Abstract Two emerging trends in multicrystalline silicon cell texturing are plasma texturing, and metal catalyzed chemical etching. Both processes roughen silicon surfaces in order to increase light absorption. These processes are attractive as they are applicable to diamond-wire sawn wafers. This work investigates the optical properties of these surfaces, and other conventionally textured surfaces like isotropic acidic and random pyramid textures, are investigated for cells in air and after encapsulation for a large range of angles of incidence. We find that the angular optical performance in air varies strongly with cell texture, but when embedded in a module structure these variations are significantly mitigated: the advantages of a high angular absorption of solar cells are not fully transferred to the module level. This is especially notable for plasma etched, black silicon cell structures which suffer comparatively from poorer index matching and light recycling inside a module structure. The losses caused explicitly by the module embedding (described in the cell to module ratio) are in the range of 1–5% for perpendicular incoming light, and increase to 6–15% at an angle of incidence of 70°. Based on these angular performances, we calculate the annual yield of the modules and find that it varies by less than 2% for the cell textures. Nevertheless, the annual optical yield for the black silicon cell structures are the highest, whereas the metal catalyzed chemical etching cell structures show the lowest performance. Further, we find that different annual distributions of the incoming light at the two investigated locations (Melbourne and Alice Springs) only impact the relative performance of the cell textures at high module tilt angles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. IEC 61215-1:2016, Terrestrial photovoltaic (PV) modules - Design qualification and type approval in VDE Verlag, 2016-03.
2. Wirth · 2016
3. S.C. Baker-Finch, K.R. McIntosh, D. Inns, M.L. Terry, Modelling isotextured silicon solar cells and modules, in: Proceedings of the 38th Photovoltaic Specialists Conference (PVSC), IEEE, 2012, pp. 000192–000198.10.1109/PVSC.2012.6317599 ↗
4. Angle-dependent reflectance measurements on photovoltaic materials and solar cells10.1016/S0030-4018(99)00561-1 ↗
5. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
6. P.R.C.c. Xiaogang Liu ab, Marius Peters b, Bram Hoex b, JacquelineM. Cole *ad, DerekJ. Fray c, Black Silicon: Fabrication Methods, Properties and Solar Energy Applications, 2014.
7. High-performance black multicrystalline silicon solar cells by a highly simplified metal-catalyzed chemical etching method10.1109/JPHOTOV.2016.2559779 ↗
8. VDMA, International Technology Roadmap for Photovoltaic Results 2017, in: energytrend, 2017.
9. Method for quantifying optical parasitic absorptance loss of glass and encapsulant materials of silicon wafer based photovoltaic modules10.1016/j.solmat.2012.03.008 ↗
10. Unified methodology for determining CTM ratios: systematic prediction of module power10.1016/j.solmat.2014.06.025 ↗
11. Detailed current loss analysis for a PV module made with textured multicrystalline silicon wafer solar cells, photovoltaics
12. Optical performance of solar modules10.1016/j.egypro.2013.07.288 ↗
13. Impact of cell texturing quality on cell to module losses10.1016/j.egypro.2015.07.058 ↗
14. Angle Dependence of solar cells and modules: the role of cell texturization10.1109/JPHOTOV.2016.2614120 ↗
15. Cell-to-module optical loss/gain analysis for various photovoltaic module materials through systematic characterization10.7567/JJAP.56.08MD03 ↗
16. ALANOD, Technical information, in, 2017.
17. A.S. Shannon, L. Storm, TrudyM. Ricker, A Discussion of Center Mount Sample Holder Designs and Applications, in, 〈https://www.labsphere.com/site/assets/files/2571/the-use-of-center-mount-sample-holders.pdf〉, 1998.
18. Characterisation and optimisation of PECVD SiNx as an antireflection coating and passivation layer for silicon solar cells10.1063/1.4795108 ↗
19. NIST, Transfer spectrophotometer in, National Institute of Standards and Technology.
20. Grabe · 2010
21. S. Krauter, P. Grunow, Optical modelling and simulation of PV module encapsulation to improve structure and material properties for maximum energy yield, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, Conference Record of the 2006 IEEE, 2006, pp. 2133–2137.10.1109/WCPEC.2006.279926 ↗
22. SUNCALCULATOR: A program to calculate the angular and spectral distribution of direct and diffuse solar radiation10.1016/j.solmat.2016.08.008 ↗
23. Bureau of Meteorology (BOM), Australian Hourly Solar Irradiance Gridded Data, in, Bureau of Meteorology, 2018/01.
24. Impact of PV module configuration on energy yield under realistic conditions10.1007/s11082-017-0903-0 ↗
25. Calculation of the PV modules angular losses under field conditions by means of an analytical model10.1016/S0927-0248(00)00408-6 ↗
26. R.G.G. Friesen, H.G. Beyer, S. Williams, A. Guerin de Montgareuil, N. van der Borg, W.G.J.H.M. van Sark, T. Huld, B. Müller, A.C. de Keizer, Y. Niu, INTERCOMPARISON OF DIFFERENT ENERGY PREDICTION METHODS WITHIN THE EUROPEAN PROJECT "PERFORMANCE" - RESULTS 1ST ROUND ROBIN in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3-7 September 2007, Milan, Italy, 2007.
27. Effect of illumination intensity on cell parameters of a silicon solar cell10.1016/j.solmat.2010.03.018 ↗