journal article·2013-11

Interfacial layer for efficiency improvement of solution-processed small molecular solar cells

Yang Liu, Fujun Zhang, Haidao Dai, Weihua Tang, Zixuan Wang, Jian Wang, Aiwei Tang, Hongsheng Peng, Zheng Xu, Yongsheng Wang

Publisher page

Abstract

Abstract A series of solution-processed small molecular solar cells (SMSCs) were fabricated with 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl] (DIB-SQ) and [6,6]-phenyl-C-71-butyric acid methyl ester (PC 71 BM) as the active layer. The cells with MoO 3 as anode interfacial layer and LiF as cathode interfacial layer have the maximum power conversion efficiency (PCE) 2.68%, with short circuit density ( J sc ) of 8.2 mA/cm 2 , open circuit voltage ( V oc ) of 0.9 V and fill factor (FF) of 36.3% under 100 mW/cm 2 illumination intensity. The key parameters, including J sc V oc , and FF of cells with MoO 3 as anode interfacial layer and LiF as cathode interfacial layer, are improved about 54.7%, 26.9%, and 23.5% compared with these of cells using PEDOT:PSS as anode interfacial layer and LiF as cathode interfacial layer. The underlying reasons are mainly attributed to the effect of MoO 3 layer on charge carrier collection and morphology of active layer. The effect of illumination intensity on the performance of cells was also discussed in detailed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
2. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
3. High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
4. Solution processable rhodanine-based small molecule organic photovoltaic cells with a power conversion efficiency of 6.1%10.1002/aenm.201100572 ↗
5. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
6. Simple, highly efficient vacuum-processed bulk heterojunction solar cells based on merocyanine dyes10.1002/aenm.201100283 ↗
7. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
8. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
9. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
10. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration10.1016/j.solmat.2008.12.001 ↗
11. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
12. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
13. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
14. Recent progress in the design of narrow bandgap conjugated polymers for high-efficiency organic solar cells10.1016/j.progpolymsci.2012.03.001 ↗
15. A solution-processable star-shaped molecule for high-performance organic solar cells10.1002/adma.201004445 ↗
16. A tailored hybrid BODIPY-oligothiophene donor for molecular bulk heterojunction solar cells with improved performances10.1039/c0cc01144d ↗
17. Solution-processable crystalline platinum-acetylide oligomers with broadband absorption for photovoltaic cells10.1021/cm903329a ↗
18. Solar Cell Efficiency, self-assembly, and dipole-dipole interactions of isomorphic narrow-band-gap molecules10.1021/ja3050713 ↗
19. Chemical annealing of zinc tetraphenylporphyrin films: Effects on film morphology and organic photovoltaic performance10.1021/cm3012777 ↗
20. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
21. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
22. Aggregation-dependent photovoltaic properties of squaraine/PC61BM bulk heterojunctions10.1039/c2cp40789b ↗
23. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
24. High efficient inverted polymer solar cells with different annealing treatment10.1016/j.msec.2012.01.008 ↗
25. Oxide sandwiched metal thin film electrodes for long term stable organic solar cells10.1002/adfm.201201592 ↗
26. Polyviologen derivatives as an interfacial layer in polymer solar cells10.1016/j.solmat.2012.08.003 ↗
27. Nickle oxide based bulk heterojunction flexible solar cells
28. Performance improvement of inverted polymer solar cells thermally evaporating nickel oxide as an anode buffer layer10.1016/j.solmat.2011.11.011 ↗
29. Ultrathin molybdenum oxide anode buffer layer for organic photovoltaic cells formed using atomic layer deposition10.1016/j.solmat.2011.12.004 ↗
30. Nanocrystal V2O5 thin film as hole-extraction layer in normal architecture organic solar cells10.1016/j.orgel.2012.08.007 ↗
31. Solution processable, precursor based zinc oxide buffer layers for 4.5% efficient organic tandem solar cells10.1016/j.orgel.2012.07.043 ↗
32. Luminescent and photovoltaic properties of poly(9,9-dioctylfluorene-co-bithiophene) in organic electronic devices10.1007/s11434-011-4964-3 ↗
33. Self-assembled mesogens modified fullerene for efficiently stable bulk heterojunction solar cells10.1016/j.solmat.2011.08.011 ↗
34. Solid-state dye-sensitized and bulk heterojunction solar cells using TiO2 and ZnO nanostructures: recent progress and new concepts at the borderline10.1002/pi.3157 ↗
35. Effect of temperature and illumination on the electrical characteristics of polymer-fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
36. Efficient squaraine-based solution processable bulk-heterojunction solar cells10.1021/ja8067879 ↗
37. Marked Alkyl- vs Alkenyl-Substitutent effects on squaraine dye solid-state structure, carrier mobility, and bulk-heterojunction solar cell efficiency10.1021/ja100520q ↗
38. High efficiency organic photovoltaic cells based on a vapor deposited squaraine donor10.1063/1.3152011 ↗
39. Efficient, ordered bulk heterojunction nanocrystalline solar cells by annealing of ultrathin squaraine thin films10.1021/nl1018194 ↗
40. Solution-processed squaraine bulk heterojunction photovoltaic cells10.1021/nn100195j ↗
41. Solvent‐Annealed crystalline squaraine: PC70BM (1: 6) solar Cells10.1002/aenm.201100045 ↗
42. Co‐evaporated bulk heterojunction solar cells with >6.0% efficiency10.1002/adma.201200234 ↗
43. Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells10.1016/j.solmat.2011.09.006 ↗
44. Design rules for donors in bulk-heterojunction solar cells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
45. Origin of different dependences of open-circuit voltage on the electrodes in layered and bulk heterojunction organic photovoltaic cells10.1109/TED.2009.2036787 ↗
46. Dependence of band offset and open-circuit voltage on the interfacial interaction between TiO2 and carboxylated polythiophenes10.1021/jp056576y ↗
47. Intensity-dependent photocurrent generation at the anode in bulk-heterojunction solar cells10.1007/s00340-008-3081-8 ↗
48. Electrical aspects of operation of polymer-fullerene solar cells10.1016/j.tsf.2003.11.063 ↗
49. Separation of geminate charge-pairs at donor-acceptor interfaces in disordered solids10.1016/j.cplett.2004.09.030 ↗