CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer
Source abstract
Abstract
Compared with the traditional structure, the new Cu 2ZnSn(S, Se) 4 (CZTSSe) solar cell without ZnO window layer has a larger short-circuit current reduction. Due to the poor band matching, serious interface recombination exists at the CZTSSe/CdS heterojunction interface. We have designed a strategy for the preparation of CdS(In) buffer layers by In ion doping to increase the depletion layer width, enhance the carrier concentration in the CdS(In) buffer layer, and improve the energy band alignment problem at the interface of the CZTSSe/CdS heterojunction, which in turn reduces the J SC loss caused by the removal of the ZnO layer. The energy band alignment of the CZTSSe/CdS heterojunction was modulated by finely controlling the doping amount of In ions, which decreased the conduction band offset (CBO) from 0.32 eV to 0.28 eV. Good band alignment is more conducive to carrier separation and transport, and reducing the nonradiative charge recombination at the CZTSSe/CdS heterojunction interface can effectively improve the J SC. Based on the contribution of device electrical parameters to photoelectric conversion efficiency (PCE), the contributions of J SC, open-circuit voltage, and fill factor were calculated to be 107.56%, -6.89%, and -0.67%, respectively, which indicates that the method significantly improves short-circuit currents and reduces the loss of J SC due to the absence of ZnO layer. This study provides a method to achieve high-efficiency CZTSSe solar cells by optimizing the energy band matching of CZTSSe/CdS heterojunctions from 7.07% PCE in conventional cells to 9.01% PCE in novel cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Identifying the origin of the Voc deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution10.1039/D0EE03702H ↗
2. Coordination engineering of Cu-Zn-Sn-S aqueous precursor for efficient kesterite solar cells10.1016/j.scib.2020.01.005 ↗
3. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
4. Device postannealing enabling over 12% efficient solution‐processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
5. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Efficient and composition‐tolerant kesterite Cu2ZnSn (S, Se)4 solar cells derived from an in situ formed multifunctional carbon framework10.1002/aenm.202102298 ↗
7. Cadmium-free kesterite thin-film solar cells with high efficiency approaching 12%10.1002/advs.202302869 ↗
8. Suppressing buried interface nonradiative recombination losses toward high-efficiency antimony triselenide solar cells
9. Charge separation enhancement enables record photocurrent density in Cu2ZnSn(S,Se)4 photocathodes for efficient solar hydrogen production
10. Solar cell efficiency tables (version 57)10.1002/pip.3371 ↗
11. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
12. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
13. High efficiency Cu2ZnSn (S, Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
14. 10% Efficiency Cu2ZnSn (S, Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
15. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu, Ag) 2 ZnSn (S, Se)4 solar cells10.1039/C7EE01405H ↗
16. Device characteristics of an 11.4% CZTSe solar cell fabricated from sputtered precursors10.1002/aenm.201703295 ↗
17. Elucidating mechanisms behind ambient storage-induced efficiency improvements in perovskite solar cells10.1021/acsenergylett.0c02406 ↗
18. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
19. High efficiency Cu2ZnSn (S, Se) 4 solar cells with shallow LiZn acceptor defects enabled by solution‐based Li post‐deposition treatment10.1002/aenm.202003783 ↗
20. Progress and prospects of CZTSSe/CdS interface engineering to combat high open-circuit voltage deficit of kesterite photovoltaics: a critical review10.1039/D0TA06450E ↗
21. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin‐film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
22. Suppression of interfacial oxygen vacancies for efficient charge extraction at CZTS/TiO2 heterojunction10.1063/5.0038458 ↗
23. Na-doping-induced modification of the Cu2ZnSn (S, Se) 4/CdS heterojunction towards efficient solar cells10.1016/j.jechem.2020.09.007 ↗
24. Defect suppression in multinary chalcogenide photovoltaic materials derived from kesterite: progress and outlook10.1039/D0TA08202C ↗
25. Over 10% efficient Cu2CdSnS4 solar cells fabricated from optimized sulfurization10.1002/adfm.202207470 ↗
26. Self‐powered broadband kesterite photodetector with ultrahigh specific detectivity for weak light applications10.1002/sus2.160 ↗
27. Unveiling the selenization reaction mechanisms in ambient air‐processed highly efficient kesterite solar cells10.1002/aenm.202300521 ↗
28. Y. Zhao, S. Chen, M. Ishaq, M. Cathelinaud, C. Yan, H. Ma, P. Fan, X. Zhang, Z. Su, G. Liang, Controllable Double Gradient Bandgap Strategy Enables High Efficiency Solution-Processed Kesterite Solar Cells, Adv. Funct. Mater., n/a 2311992. https://doi.org/https://doi.org/10.1002/adfm.202311992..
29. Over 12% efficient kesterite solar cell via back interface engineering10.1016/j.jechem.2022.08.031 ↗
30. Characterization of Cd-free Zn1–x Mg x O: Al/Zn1–x Mg x O/Cu (in, Ga)(S, Se) 2 solar cells fabricated by an all dry process using ultraviolet light excited time-resolved photoluminescence10.1021/acsami.8b19344 ↗
31. New reaction kinetics for a high‐rate chemical bath deposition of the Zn (S, O) buffer layer for Cu (In, Ga) Se2‐based solar cells10.1002/pip.1244 ↗
32. Wet pretreatment-induced modification of Cu (In, Ga) Se2/Cd-free ZnTiO buffer interface10.1021/acsami.8b01090 ↗
33. Enhanced efficiency of Cd-free Cu (In, Ga)(Se, S) 2 minimodule via (Zn, Mg) O second buffer layer and alkali metal post-treatment10.1109/JPHOTOV.2017.2745710 ↗
34. Atomic layer deposition of Zn (O, S) buffer layers for Cu (In, Ga) Se2 solar cells with KF post-deposition treatment10.1016/j.solmat.2018.03.045 ↗
35. Over 11 % efficient eco-friendly kesterite solar cell: effects of S-enriched surface of Cu2ZnSn(S,Se)4 absorber and band gap controlled (Zn,Sn)O buffer10.1016/j.nanoen.2020.105206 ↗
36. High‐efficiency copper indium gallium diselenide (CIGS) solar cells with indium sulfide buffer layers deposited by atomic layer chemical vapor deposition (ALCVD)10.1002/pip.508 ↗
37. Cadmium‐free kesterite thin‐film solar cells with high efficiency approaching 1210.1002/advs.202302869 ↗
38. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1–xCdxS buffer layer10.1002/aenm.201600046 ↗
39. Rational design of heterojunction interface for Cu2ZnSn (S, Se) 4 solar cells to exceed 12% efficiency10.1002/solr.202101032 ↗
40. Electrical properties of point defects in CdS and ZnS10.1063/1.4819492 ↗
41. Device postannealing enabling over 12% efficient solution‐processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
42. Temperature dependence of Cu2ZnSn(SexS1−x)4 monograin solar cells10.1016/j.solener.2009.09.011 ↗
43. Noble metal-free ultrathin MoS 2 nanosheet-decorated CdS nanorods as an efficient photocatalyst for spectacular hydrogen evolution under solar light irradiation10.1039/C6TA08628D ↗
44. Intermixing at the absorber-buffer layer interface in thin-film solar cells: the electronic effects of point defects in Cu (In, Ga)(Se, S) 2 and Cu2ZnSn (Se, S) 4 devices10.1063/1.4892407 ↗
45. Efficiency enhancement of Cu2ZnSn(S, Se)4 solar cells by addition a CuSe intermediate layer between Cu2ZnSn(S, Se)4 and Mo electrode10.1016/j.jallcom.2022.165056 ↗
46. Optical designs that improve the efficiency of Cu 2 ZnSn (S, Se) 4 solar cells10.1039/C3EE42541J ↗