journal article·2024-03Open access

Paste-based silver reduction for iTOPCon rear side metallization

Daniel Ourinson, Andreas Brand, Andreas Lorenz, Marwan Dhamrin, Sebastian Tepner, Michael Linse, Nathalie Göttlicher, René Haberstroh, Kosuke Tsuji, Jonas D. Huyeng, Florian Clement

Abstract

This work presents two approaches to reduce the silver (Ag) amount on the rear side of M2-sized industrial tunnel oxide passivated contact (iTOPCon) solar cells by (partially) substituting conventional Ag pastes with copper (Cu) and aluminum (Al) pastes. The first approach is Cu-based and works by screen printing an Ag layer with ca. 75% Ag paste reduction compared to a conventional Ag layer (functioning as a contact and Cu barrier layer) and screen printing a full-area Cu layer on top of the Ag layer (functioning as a conduction layer compensating the reduced Ag amount). This Cu-based approach yields similar power conversion efficiency (η) compared to the conventional approach, showing the Cu-based approach is promising for iTOPCon solar cells. The second approach is Al-based and works by laser contact opening of the dielectric layers and screen printing a full-area layer with an Al paste – adapted to properly contact an n+-poly-Si layer –, substituting Ag on the rear side entirely. This Al-based approach exhibits a 0.9%abs η gap to the conventional approach, mainly stemming from the Al paste damaging the poly-Si layer, while – on a positive note – neither rear p+ layer formation nor tunnel oxide layer penetration by the Al paste is detected. Even though the abovementioned η gap must be eliminated in the future, it shows the principal functionality and potential of such type of contact for iTOPCon solar cells.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
2. 2023
3. The silver learning curve for photovoltaics and projected silver demand for net‐zero emissions by 2050
4. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
5. FlexTrail printing as direct metallization with low silver consumption for silicon heterojunction solar cells: evaluation of solar cell and module performance
6. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
7. Suzuki · 2020
8. Enabling savings in silver consumption and poly-Si thickness by integration of plated Ni/Cu/Ag contacts for bifacial TOPCon solar cells10.1016/j.solmat.2022.111889 ↗
9. Thermal stable high‐efficiency copper screen printed back contact solar cells
10. Magazine · 2023
11. Quick determination of copper-metallization long-term impact on silicon solar cells10.1149/1.3466984 ↗
12. Copper penetration in laser-doped selective-emitter silicon solar cells with plated nickel barrier layers10.1016/j.solmat.2014.07.026 ↗
13. Impact of postplating annealing on defect activation in boron-doped PERC solar cells10.1109/JPHOTOV.2020.2968110 ↗
14. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
15. Rear-side contact opening by laser ablation for industrial screen-printed Aluminium local back surface field silicon wafer solar cells10.1016/j.egypro.2012.07.003 ↗
16. 2021
17. Atmospheric pressure dry etching of polysilicon layers for highly reverse bias‐stable TOPCon solar cells10.1002/solr.202100481 ↗
18. Influence of polysilicon thickness on properties of screen‐printed silver paste metallized silicon oxide/polysilicon passivated contacts10.1002/pssa.202100243 ↗
19. Influence of silicon substrate surface finish on the screen‐printed silver metallization of polysilicon‐based passivating contacts
20. Rauer · 2014
21. Giesecke and Wilhelm Warta, Microsecond carrier lifetime measurements in silicon via quasi‐steady‐state photoluminescence10.1002/pip.1128 ↗
22. Vcsel arrays expanding the range of high-power laser systems and applications
23. Laser-powered Co-firing process for highly efficient Si solar cells