journal article·2024-01

Optimization of design parameter of V-shaped perforated blocks in rectangular duct of solar air heater by using hybrid BWM-CODAS technique

Rohit Khargotra, Tabish Alam, Kyaw Thu, Kovács András, Tej Singh

Publisher page

Abstract

This study investigates the influence of different functional parameters of V-SP blocks on flow characteristics and heat enhancement in a rectangular duct via experimental analysis. The main focus of this work is on designing SAH using a novel multi-criteria decision-making (MCDM) method. The influence of the different geometrical parameter`s e/H = 0.4–1.0, β = 5%–25 %, P/e = 4–12 on the f, Nu and η was investigated and optimized. The combination of Re = 16000, β = 0.2, P/e = 8, e/H = 0.8yielded the most significant Nu (303.70). In contrast, the combination of Re = 16000, e/H = 0.6, P/e = 12, β = 0.15 yield the lowest f (0.083). The maximum η of 2.74 was obtained using Re = 4000, β = 0.2, P/e = 8, e/H = 0.8. Choosing the most suitable SAH design alternative is a challenging task as no single option can fulfil all the attain performance criteria. To address this, a hybrid MCDM approach, namely hybrid BWM-CODAS architecture, was utilized. The design alternative A-20, having geometric and flow arrangement as Re = 16,000, β = 0.2, P/e = 8 and e/H = 0.8 gives the overall performance in addition to another examined alternative. Additionally, the implicit of the proposed decision-making framework was validated with other MCDM approaches, indicating the results` robustness.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Heat Transfer Mechanisms · Heat Transfer and Optimization · Fluid Dynamics and Turbulent Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. A solar thermal sorption-enhanced steam methane reforming (SE-SMR) approach and its performance assessment
2. Influence of artificial roughness parametric variation on thermal performance of solar thermal collector: an experimental study, response surface analysis and ANN modelling
3. Analysis of the effect of perforation in multi-v rib artificial roughened single pass solar air heater: -Part A10.1080/08916152.2021.1988761 ↗
4. Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate10.1016/S0017-9310(02)00046-7 ↗
5. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribs10.1016/j.solener.2010.02.004 ↗
6. Experimental investigation on heat transfer and fluid flow characteristics of air flow in a rectangular duct with Multi V-shaped rib with gap roughness on the heated plate10.1016/j.solener.2012.03.014 ↗
7. Influence of heat enhancement technique on the thermal performance of solar water heater for sustainable built environment. Start-of-the-art review
8. Experimental study of a solar air heater with modified absorber plate through square obstacles with threaded pin fins10.1016/j.applthermaleng.2023.120544 ↗
9. Thermal behaviors in heat exchanger channel with V-shaped ribs and grooves10.1016/j.cherd.2019.07.025 ↗
10. High thermal performance of the solar air heater designs triggered by improved jet stability10.1016/j.renene.2023.01.031 ↗
11. Heat transfer and friction factor correlations for an impinging air jets solar thermal collector with arc ribs on an absorber plate
12. Optimal insulation assessment, emission analysis, and correlation formulation for Indian region10.3390/buildings13020569 ↗
13. Thermo-hydraulic investigation of open micro prism pin fin heat sink having varying prism sides10.1016/j.aej.2023.02.016 ↗
14. Enhanced thermal performance of tubular heat exchanger using triangular wing vortex generator10.1080/23311916.2022.2050021 ↗
15. Thermo-hydraulic efficiency and correlation development of an indoor designed jet impingement solar thermal collector roughened with discrete multi-arc ribs10.1016/j.renene.2022.03.037 ↗
16. Experimental investigation of impact of the energy storage medium on the thermal performance of double pass solar air heater
17. Impact of perforated shapes in delta type hindrance promoter on thermo-hydraulic performance of solar water heating system (An experimental study)10.1016/j.csite.2020.100831 ↗
18. Influence of hindrance promoter on the thermal augmentation factor of solar water heater (an experimental study)10.1016/j.renene.2020.08.146 ↗
19. Experimental investigation of thermal performance of novel type vortex generator in rectangular channel10.1016/j.icheatmasstransfer.2023.106785 ↗
20. The experimental and numerical investigation of novel type conic vortex generator on heat transfer enhancement10.1016/j.ijthermalsci.2023.108383 ↗
21. Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range10.1016/j.ijheatfluidflow.2008.01.004 ↗
22. Numerical analysis of flow structure and heat transfer characteristics in square channels with different internal-protruded dimple geometrics10.1016/j.ijheatmasstransfer.2013.07.094 ↗
23. Heat transfer enhancement in solar air heater with V-shaped perforated baffles10.1063/1.4798411 ↗
24. Turbulent convection in a solar air heater channel with baffles/winglets. In2014
25. Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches10.1016/j.icheatmasstransfer.2008.11.005 ↗
26. Turbulence and pressure drop behaviors around semicircular ribs in a rectangular channel10.2298/TSCI111022142N ↗
27. A numerical investigation of turbulent flows through an artificially roughened solar air heater10.1080/10407782.2013.846187 ↗
28. Investigations for efficient design of a new counter flow double-pass curved solar air heater10.1016/j.renene.2021.12.101 ↗
29. CFD (computational fluid dynamics) investigation on Nusselt number and friction factor of solar air heater duct roughened with non-uniform cross-section transverse rib10.1016/j.energy.2015.03.015 ↗
30. Experimental study and correlation development for Nusselt number and friction factor for discretized broken V-pattern baffle solar air channel10.1016/j.expthermflusci.2016.10.002 ↗
31. Performance investigation of a solar thermal collector provided with air jets impingement on multi V-shaped protrusion ribs absorber plate10.1007/s00231-019-02755-2 ↗
32. Experimental study of enhancement of heat transfer and pressure drop in a solar air channel with discretized broken V-pattern baffle10.1016/j.renene.2016.09.033 ↗
33. Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate10.1016/S0017-9310(02)00046-7 ↗
34. Nusselt number and friction factor correlations for forced convective type counter flow solar air heater having discrete multi-V shaped and staggered rib roughness on both sides of the absorber plate10.1016/j.applthermaleng.2017.10.080 ↗
35. Experimental investigation on performance of a double pass artificial roughened solar air heater duct having roughness elements of the combination of discrete multi V shaped and staggered ribs10.1016/j.energy.2016.09.138 ↗
36. Experimental investigation and optimization of potential parameters of discrete V down baffled solar thermal collector using hybrid Taguchi-TOPSIS method10.1016/j.applthermaleng.2022.118250 ↗
37. A case study on thermo-hydraulic performance of jet plate solar air heater using response surface methodology10.1016/j.csite.2022.101983 ↗
38. Selection of optimal parameters using PSI approach of a dimpled-V pattern roughened solar heat collector
39. Experimental investigation and optimization of dimple-roughened impinging jet solar air collector using a novel AHP-MABAC approach10.1007/s11356-022-24765-0 ↗
40. Optimization of single arc protrusion ribs parameters in solar air heater with impinging air jets based upon PSI approach10.1016/j.tsep.2018.05.008 ↗
41. Optimization of parameters in solar thermal collector provided with impinging air jets based upon preference selection index method10.1016/j.renene.2016.06.046 ↗
42. Multi-objective optimisation of thermal energy storage using phase change materials for solar air systems10.1016/j.renene.2018.08.071 ↗
43. Hybrid FAHP (fuzzy analytical hierarchy process)-FTOPSIS (fuzzy technique for order preference by similarity of an ideal solution) approach for performance evaluation of the V down perforated baffle roughened rectangular channel10.1016/j.energy.2015.03.007 ↗
44. Hybrid entropy–TOPSIS approach for energy performance prioritization in a rectangular channel employing impinging air jets10.1016/j.energy.2017.06.021 ↗
45. Experimental investigation and optimization of sand-coated solar air collector parameters by fuzzy-MCDM integrated decision approach
46. A case study on thermo-hydraulic performance of jet plate solar air heater using response surface methodology10.1016/j.csite.2022.101983 ↗
47. Optimization of parameters in solar thermal collector provided with impinging air jets based upon preference selection index method10.1016/j.renene.2016.06.046 ↗
48. Optimization of multiple arcs protrusion obstacle parameters using AHP-TOPSIS approach in an impingement jet solar air passage10.1007/s00231-018-2405-4 ↗
49. Thermo-hydraulic characterization and design optimization of delta-shaped obstacles in solar water heating system using CRITIC-COPRAS approach10.1016/j.energy.2022.125236 ↗
50. Design and performance optimization of solar water heating system with perforated obstacle using hybrid multi-criteria decision-making approach10.1016/j.est.2023.107099 ↗
51. Experimental investigation on heat transfer enhancement due to V-shaped perforated blocks in a rectangular duct of solar air heater10.1016/j.enconman.2014.02.044 ↗
52. Standard · 1977
53. Best-worst multi-criteria decision-making method10.1016/j.omega.2014.11.009 ↗
54. A new combinative distance-based assessment (CODAS) method for multi-criteria decision-making
55. Sustainability prioritization of energy storage technologies for promoting the development of renewable energy: a novel intuitionistic fuzzy combinative distance-based assessment approach10.1016/j.renene.2018.01.087 ↗
56. A hybrid MCDM framework and simulation analysis for the assessment of worst polluted cities10.1016/j.simpat.2022.102540 ↗
57. An automotive radiator with multi-walled carbon-based nanofluids: a study on heat transfer optimization using MCDM techniques10.1016/j.csite.2021.101724 ↗
58. An integrated SWARA-CODAS decision-making algorithm with spherical fuzzy information for clean energy barriers evaluation
59. Optimization on tribological properties of natural fiber reinforced brake friction composite materials: effect of objective and subjective weighting methods10.1016/j.polymertesting.2022.107873 ↗
60. Optimising the thermohydraulic performance of rough surfaces10.1016/0017-9310(75)90232-X ↗
61. An alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems10.1016/j.cie.2011.04.009 ↗
62. Optimum design based on fabricated natural fiber reinforced automotive brake friction composites using hybrid CRITIC-MEW approach10.1016/j.jmrt.2021.06.051 ↗
63. Multicriteria performance evaluation of fiber-reinforced cement composites: an environmental perspective10.1016/j.compositesb.2021.108937 ↗
64. Parametric optimization of hybrid artificial roughness used in solar air heaters using multiple criteria decision-making techniques10.1177/09576509231183037 ↗