Development of highly stable paraffin wax/water phase change material nano-emulsions as potential coolants for thermal management
Source abstract
Abstract
This study was to explore the hydrophilic surfactant/Brij L4 mixture scheme for fabrication of highly stable paraffinic nano-emulsions melting at 55 °C by the low-energy phase inversion temperature method that has not been reported previously. Two commercial paraffin waxes were chosen as the PCM agents, Sasolwax 5203 with a higher onset T m of 54 °C in the initial development and OP44E with a lower onset T m of 44 °C for further assessment and fabrication. At accelerated stability testing by thermal approach, the rate of droplet size increase was mainly attributed to Ostwald ripening destabilization mechanism, and decreased by about 5 times for every 5 °C drop. Only a moderate increase in the particle size was observed, from 47.7 nm to 120.6 nm, over a period of 9 months at 45 °C. The exciting results in the accelerated stability evaluation greatly outperformed than those previous results only obtained from the regular stability testing including room temperature storage and heating-cooling cycles in a container, and hence this experimental result can offer a more meaningful reference in terms of service life of nano-emulsions flowing in pipelines. With the optimized surfactant mixtures, a series of highly stable paraffinic nano-emulsions in the working temperature range of 30–50 °C were successfully formulated as promising coolants in the active thermal management system.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Reducing carbon emissions: the role of renewable energy and democracy10.1016/j.jclepro.2019.118245 ↗
2. Solar energy: potential and future prospects10.1016/j.rser.2017.09.094 ↗
3. Hydrogen production from phototrophic microorganisms: reality and perspectives10.1016/j.ijhydene.2019.01.092 ↗
4. Solar photovoltaic energy optimization methods, challenges and issues: a comprehensive review10.1016/j.jclepro.2020.125465 ↗
5. Thermal energy storage technologies for concentrated solar power – a review from a materials perspective10.1016/j.renene.2019.10.127 ↗
6. Solar combined cooling, heating and power systems based on hybrid PVT, PV or solar-thermal collectors for building applications10.1016/j.renene.2019.05.004 ↗
7. An integrated, solar-driven membrane distillation system for water purification and energy generation10.1016/j.apenergy.2018.12.069 ↗
8. Effects of different environmental and operational factors on the PV performance: a comprehensive review10.1002/ese3.1043 ↗
9. Recent advances and applications of solar photovoltaics and thermal technologies10.1016/j.energy.2020.118254 ↗
10. A review on recent progress, challenges and perspective of battery thermal management system10.1016/j.ijheatmasstransfer.2020.120834 ↗
11. Liquid cooling with phase change materials for cylindrical Li-ion batteries: an experimental and numerical study10.1016/j.energy.2019.116565 ↗
12. Hybrid thermal management for achieving extremely uniform temperature distribution in a lithium battery module with phase change material and liquid cooling channels10.1016/j.est.2022.104272 ↗
13. Investigation of a water-NEPCM cooling thermal management system for cylindrical 18650 Li-ion batteries10.1016/j.energy.2021.122570 ↗
14. Exergy and energy analysis of wavy tubes photovoltaic-thermal systems using microencapsulated PCM nano-slurry coolant fluid10.1016/j.apenergy.2020.114849 ↗
15. Mini-channel cold plate with nano phase change material emulsion for Li-ion battery under high-rate discharge10.1016/j.apenergy.2020.115808 ↗
16. A delayed cooling system coupling composite phase change material and nano phase change material emulsion10.1016/j.applthermaleng.2021.116888 ↗
17. Review on phase change material emulsions for advanced thermal management: design, characterization and thermal performance10.1016/j.rser.2022.112238 ↗
18. Highly stable graphite nanoparticle-dispersed phase change emulsions with little supercooling and high thermal conductivity for cold energy storage10.1016/j.apenergy.2016.11.122 ↗
19. Fabrication of a novel nano phase change material emulsion with low supercooling and enhanced thermal conductivity10.1016/j.renene.2019.11.044 ↗
20. Paraffin wax–water nanoemulsion: a superior thermal energy storage medium providing higher rate of thermal energy storage per unit heat exchanger volume than water and paraffin wax10.1016/j.enconman.2018.01.073 ↗
21. Thermophysical properties of water-based nano-emulsion of tricosane - an Experimental investigation10.1016/j.csite.2021.100849 ↗
22. Nano-encapsulated PCM emulsions prepared by a solvent-assisted method for solar applications10.1016/j.solmat.2019.02.021 ↗
23. Paraffin–graphene oxide hybrid nano emulsions for thermal management systems10.1016/j.colsurfa.2021.127132 ↗
24. Comparison of paraffin nanoemulsions prepared by low-energy emulsification method for latent heat storage10.1016/j.ijthermalsci.2012.12.007 ↗
25. Preparation and characterization of nano-sized phase change emulsions as thermal energy storage and transport media10.1016/j.apenergy.2017.01.012 ↗
26. Formulation of highly stable PCM nano-emulsions with reduced supercooling for thermal energy storage using surfactant mixtures10.1016/j.solmat.2021.110983 ↗
27. Cooling storage performance of a novel phase change material nano-emulsion for room air-conditioning in a self-designed pilot thermal storage unit10.1016/j.apenergy.2021.118405 ↗
28. Höhne · 2013
29. Direct and accelerated characterization of formulation stability10.1080/01932691.2011.616365 ↗
30. Preparation of phase change material emulsions with good stability and little supercooling by using a mixed polymeric emulsifier for thermal energy storage10.1016/j.solmat.2017.10.025 ↗
31. PCM in water emulsions: supercooling reduction effects of nano-additives, viscosity effects of surfactants and stability10.1002/adem.201300575 ↗
32. The effect of temperature on the phase equilibria and the types of dispersions of the ternary system composed of water, cyclohexane, and nonionic surfactant10.1016/0021-9797(68)90273-7 ↗
33. A simple method to assess the hydrophilic lipophilic balance of food and cosmetic surfactants using the phase inversion temperature of C10E4/n-octane/water emulsions10.1016/j.colsurfa.2014.02.058 ↗
34. Improving emulsion formation, stability and performance using mixed emulsifiers: a review10.1016/j.cis.2017.12.001 ↗
35. Numerical study on energy and exergy performances of a microencapsulated phase change material slurry based photovoltaic/thermal module10.1016/j.enconman.2019.01.029 ↗
36. Evaluation and manipulation of the key emulsification factors toward highly stable PCM-water nano-emulsions for thermal energy storage10.1016/j.solmat.2020.110820 ↗
37. Graphene oxide Pickering phase change material emulsions with high thermal conductivity and photo-thermal performance for thermal energy management10.1016/j.colsurfa.2019.05.007 ↗
38. Thermophysical properties of a phase change dispersion for cooling around 50 °c10.1016/j.ijrefrig.2020.05.013 ↗
39. Synthesis and characterization of a narrow size distribution nano phase change material emulsion for thermal energy storage10.1016/j.solener.2017.03.056 ↗
40. Development and characterization of novel and stable silicon nanoparticles-embedded PCM-in-water emulsions for thermal energy storage10.1016/j.apenergy.2019.01.159 ↗
41. Formation of transparent solid lipid nanoparticles by microfluidization: influence of lipid physical state on appearance10.1016/j.jcis.2015.02.010 ↗
42. Novel paraffin/ethylene propylene diene monomer phase change latex with excellent stability and low viscosity10.1016/j.solmat.2019.109957 ↗
43. Crystallization in miniemulsion droplets10.1021/jp0262057 ↗
44. Phase behaviors of n-octacosane in nanopores: role of pore size and morphology10.1016/j.tca.2020.178687 ↗
45. Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media10.1016/j.energy.2016.04.021 ↗
46. Experimental study on thermophysical properties of water-based nanoemulsion of n-eicosane PCM10.1016/j.molliq.2020.114760 ↗
47. Development of a novel phase change material emulsion for cooling systems10.1016/j.renene.2015.10.050 ↗
48. Breakdown mechanisms of oil-in-water emulsions stabilised with Pluronic F127 and co-surfactants10.1016/j.colsurfa.2019.124101 ↗
49. Nanoemulsions stabilized by non-ionic surfactants: stability and degradation mechanisms10.1039/C7CP07626F ↗
50. Development and characterization of promising Cremophor EL-stabilized o/w nanoemulsions containing short-chain alcohols as a cosurfactant10.1039/C6RA27096D ↗
51. Thermal reversibility of vitamin E-enriched emulsion-based delivery systems produced using spontaneous emulsification10.1016/j.foodchem.2015.03.080 ↗
52. Jin · 2016 · 1
53. Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application10.1016/j.est.2020.102003 ↗