New energy-saving building developed by using polyethylene glycol/halloysite nanotube energy-storage blanket and heat-insulating glass with NaxWO3@SiO2 nano-coating
Source abstract
Abstract
Transparent heat-insulation glass (HIG) with a highly selective light-absorbing coating and an energy-storage blanket (ESB) loaded with phase change materials show considerable potential in reducing building energy consumption. However, the energy-saving effect of a single material is usually not ideal, and the instability of HIG and ESB limits their applications. In this work, HIG with enhanced stability and a form-stable ESB was prepared. The temperature difference between various indoor areas and energy consumption were reduced simultaneously because of the temperature regulation function of the HIG and ESB in the light and dark areas. Na xWO 3@SiO 2 -coated HIG showed excellent daylighting and near-infrared-light-shielding ability with visible light transmittance of 71% and near-infrared light transmittance of 16%, respectively. Moreover, polyethylene glycol/halloysite nanotube composite phase change material with a high enthalpy of 71.1 J/g and a suitable phase change temperature of 27.5 °C was prepared for the form-stable ESB. The test room experiment indicated that the combination of the HIG and ESB (HIG–ESB) reduced the indoor temperature difference from 6.8 °C to 0.9 °C and the maximum temperature by 33–40%. The energy consumption simulation revealed that the ESB can save energy in all selected cities, whereas HIG is only applicable to cities in warm regions. HIG–ESB achieved the highest annual energy-saving rate of 43.9% in Hong Kong. The joint application of the HIG and ESB provides a new strategy for developing passive energy-saving buildings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Heat Island Mitigation · Building Energy and Comfort Optimization · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Renewable energy and geopolitics: a review10.1016/j.rser.2019.109547 ↗
2. PCM-mortar based construction materials for energy efficient buildings: a review on research trends10.1016/j.enbuild.2017.09.098 ↗
3. Global trends in urban electricity demands for cooling and heating10.1016/j.energy.2017.03.095 ↗
4. Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade10.1016/j.enbuild.2016.06.089 ↗
5. Synthesis of polypyrrole nanoparticles for constructing full-polymer UV/NIR-shielding film10.1039/C5RA20164K ↗
6. Potential of microencapsulated PCM for energy savings in buildings: a critical review10.1016/j.scs.2019.101884 ↗
7. Roll-to-roll sputtered ITO/Ag/ITO multilayers for highly transparent and flexible electrochromic applications10.1016/j.solmat.2016.10.033 ↗
8. Fabrication of antimony doped tin oxide (ATO) films for heat insulated glass coating10.4028/www.scientific.net/AMR.168-170.1670 ↗
9. Preparation and characterization of transparent Al doped ZnO/epoxy composite as thermal-insulating coating10.1016/j.compositesb.2011.05.015 ↗
10. Synthesis of VO2 nanoparticles by a hydrothermal-assisted homogeneous precipitation approach for thermochromic applications10.1039/C3RA47666A ↗
11. Absorption and electrochromic modulation of near-infrared light: realized by tungsten suboxide10.1039/C5NR09147K ↗
12. Control of thermochromic spectrum in vanadium dioxide by amorphous silicon suboxide layer10.1016/j.solmat.2008.04.025 ↗
13. Electronic and optical properties of Mg-, F-doped and Mg\F-codoped M1-VO2 via hybrid density functional calculations10.1016/j.jallcom.2015.10.248 ↗
14. Transparent thermal insulation coatings for energy efficient glass windows and curtain walls10.1016/j.enbuild.2014.03.032 ↗
15. Greatly improved heat-shielding performance of KxWO3 by trace Pt doping for energy-saving window glass applications10.1016/j.solmat.2017.08.013 ↗
16. Near infrared absorption of tungsten oxide nanoparticle dispersions10.1111/j.1551-2916.2007.02065.x ↗
17. Sodium tungsten bronze (NaxWO3)-doped near-infrared-shielding bulk glasses for energy-saving applications10.1016/j.jmst.2020.12.082 ↗
18. Chromatic instabilities in cesium-doped tungsten bronze nanoparticles10.1063/1.4831950 ↗
19. Series of MxWO3/ZnO (M = K, Rb, NH4) nanocomposites: combination of energy saving and environmental decontamination functions10.1016/j.apcatb.2016.08.030 ↗
20. The preparation of a high performance near-infrared shielding CsxWO3/SiO2 composite resin coating and research on its optical stability under ultraviolet illumination10.1039/C5TC01411E ↗
21. Electronic structure of sodium tungsten bronzesNaxWO3by high-resolution angle-resolved photoemission spectroscopy10.1103/PhysRevB.75.155116 ↗
22. Mineral-based form-stable phase change materials for thermal energy storage: a state-of-the art review10.1016/j.ensm.2022.01.003 ↗
23. Biological porous carbon encapsulated polyethylene glycol-based phase change composites for integrated electromagnetic interference shielding and thermal management capabilities10.1016/j.jmst.2021.11.008 ↗
24. Engineering robust multifunctional composites with enhanced electromagnetic interference shielding and all-weather thermal management capability via simple layer-by-layer assembly10.1016/j.cej.2022.137423 ↗
25. Experimental investigation of a cementitious heat storage medium incorporating a solar salt/diatomite composite phase change material10.1016/j.apenergy.2019.05.090 ↗
26. Effect of microencapsulation phase change material and diatomite composite filling on hygrothermal performance of sintered hollow bricks10.1016/j.buildenv.2019.02.036 ↗
27. Preparation and performance study of fatty acid diatomite composite phase change materials and light weight phase change gypsum wall materials
28. Preparation of a novel PEG composite with halogen-free flame retardant supporting matrix for thermal energy storage application10.1016/j.apenergy.2012.12.070 ↗
29. Kaolinite stabilized paraffin composite phase change materials for thermal energy storage10.1016/j.clay.2015.07.033 ↗
30. Preparation of paraffin/expanded vermiculite with enhanced thermal conductivity by implanting network carbon in vermiculite layers10.1016/j.cej.2015.04.077 ↗
31. Diatomite: a promising natural candidate as carrier material for low, middle and high temperature phase change material10.1016/j.enconman.2015.03.071 ↗
32. Preparation and characterization of sepiolite-based phase change material nanocomposites for thermal energy storage10.1016/j.applthermaleng.2016.07.012 ↗
33. Preparation of capric acid/halloysite nanotube composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.05.024 ↗
34. Polyethylene glycol infused acid-etched halloysite nanotubes for melt-spun polyamide-based composite phase change fibers10.1016/j.clay.2019.105249 ↗
35. Crystallohydrate loaded halloysite nanocontainers for thermal energy storage10.1002/adem.201800618 ↗
36. Thermal conductivity enhancement utilizing the synergistic effect of carbon nanocoating and graphene addition in palmitic acid/halloysite FSPCM10.1016/j.clay.2021.106068 ↗
37. Octadecane/C-decorated diatomite composite phase change material with enhanced thermal conductivity as aggregate for developing structural–functional integrated cement for thermal energy storage10.1016/j.energy.2017.10.021 ↗
38. Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage10.1016/j.apenergy.2013.01.005 ↗
39. Fabrication of dodecanol/diatomite shape-stabilized PCM and its utilization in interior plaster10.1007/s10765-018-2459-z ↗
40. Experimental investigation of thermal and mechanical properties of magnesium oxychloride cement with form-stable phase change material10.1016/j.conbuildmat.2018.07.113 ↗
41. Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials10.1016/j.enbuild.2015.07.043 ↗
42. Development of high performance PCM cement composites for passive solar buildings10.1016/j.enbuild.2019.04.011 ↗
43. Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage10.1016/j.apenergy.2015.03.137 ↗
44. Creation of advanced optical responsive functionality of ceramics by green processes10.2109/jcersj2.123.823 ↗
45. Label-free photoelectrochemical biosensor for alpha-fetoprotein detection based on Au/CsxWO3 heterogeneous films10.1016/j.talanta.2020.122074 ↗
46. Enhanced thermal properties and lab-scale thermal performance of polyethylene glycol/modified halloysite nanotube form-stable phase change material cement panel10.1016/j.conbuildmat.2022.126550 ↗
47. Energy and economic analysis of building integrated with PCM in different cities of China10.1016/j.apenergy.2016.05.032 ↗
48. Development of a stable inorganic phase change material for thermal energy storage in buildings
49. Verification and validation of EnergyPlus phase change material model for opaque wall assemblies10.1016/j.buildenv.2012.02.019 ↗
50. Solar-thermal conversion and thermal energy storage of graphene foam-based composites10.1039/C6NR03921A ↗
51. Halloysite clay nanotubes based phase change material composites with excellent thermal stability for energy saving and storage10.1039/C5RA27964J ↗
52. Low cost and eco-friendly wood fiber-based composite phase change material: development, characterization and lab-scale thermoregulation performance for thermal energy storage10.1016/j.energy.2020.116983 ↗
53. Synthesis and properties of crosslinking halloysite nanotubes/polyurethane-based solid-solid phase change materials10.1016/j.solmat.2017.08.031 ↗
54. The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices (AC, SBA-15 and MCM-41)10.1016/j.solmat.2011.08.020 ↗
55. Thermal behaviour of new type of plaster with PCM admixture10.4028/www.scientific.net/AMM.710.3 ↗
56. Development of novel biomass hybrid aerogel supported composite phase change materials with improved light-thermal conversion and thermal energy storage capacity10.1007/s42114-022-00519-x ↗
57. A roll-to-roll process for multi-responsive soft-matter composite films containing CsxWO3 nanorods for energy-efficient smart window applications10.1039/C7NH00105C ↗
58. Performance of novel thermal energy storage engineered cementitious composites incorporating a paraffin/diatomite composite phase change material10.1016/j.apenergy.2014.02.007 ↗
59. Characterization of paraffin/ultrasonic-treated diatomite for use as phase change material in thermal energy storage of buildings10.1007/s10973-016-6024-3 ↗
60. Paraffin wax–Cs0.33WO3 composite windows with excellent near infrared shielding and thermal energy storage abilities10.1007/s11696-019-00719-8 ↗